Registers refreshed 2026-11-08.See refresh dates
Germany

InfraServ GmbH & Co. Gendorf KG Geschäftsbereich Standort- und Umweltservices Abteilung Umweltmessungen

Industrieparkstraße 1, 84508, Burgkirchen an der Alz, Germany

DAKKS D-PL-17573-01-01DAKKS D-PL-17573-01-02DAKKS D-PL-17573-01-03ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
59
DAKKS certificates
3
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 59 standard numbers and the 38 official names we hold. When no standard matches, it searches the method text of every scope line.

EN37
EN 303-5Some clauses

Limits written next to it

DIN EN 303 -5 Kapitel 5

Some clauses. Written next to it on line 9 of DAKKS certificate D-PL-17573-01-01.

EN 1911Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method
EN 1948-1Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
EN 1948-4
EN 12341
EN 12457-4Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
EN 12619Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
EN 12879Characterization of sludges - Determination of the loss on ignition of dry mass
EN 12880Characterization of sludges - Determination of dry residue and water content
EN 13211Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
EN 13284-1Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 13346Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods
Show all 37
EN 13528-3
EN 14181Stationary source emissions - Quality assurance of automated measuring systems
EN 14211
EN 14346Characterization of waste - Calculation of dry matter by determination of dry residue or water content
EN 14385Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
EN 14625
EN 14662-1
EN 14662-2
EN 14789Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
EN 14790Stationary source emissions - Determination of the water vapour in ducts - Standard reference method
EN 14791Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
EN 14792Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescence
EN 14884
EN 14902
EN 15058Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
EN 15259Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
EN 15549
EN 15841
EN 15980
EN 16339
EN 16911-1
EN 16911-2
EN 17340
EN 26777Water quality - Determination of nitrite - Molecular absorption spectrometric method
EN 27888Water quality - Determination of electrical conductivity
ISO18
ISO 5815-1Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition
ISO 7980Water quality - Determination of calcium and magnesium - Atomic absorption spectrometric method
ISO 9377-2Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography
ISO 9562Water quality - Determination of adsorbable organically bound halogens (AOX)
ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 10523Water quality - Determination of pH
ISO 11885Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 12039Stationary source emissions - Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas - Performance characteristics of automated measuring systems
ISO 12846Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment
ISO 14911Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water
ISO 15587-1Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion
ISO 15587-2Water quality - Digestion for the determination of selected elements in water - Part 2: Nitric acid digestion
Show all 18
ISO 15705Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
ISO 16911-1Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
ISO 17294-2Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
ISO 20236Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion
ISO 20595Water quality - Determination of selected highly volatile organic compounds in water - Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS)
ISO 25140Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
DIN3
DIN 38406
DIN 38409-H1
DIN 51402-1
Other standards1
38407

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

20 lines
DAKKS

ISO/IEC 17025

Active

D-PL-17573-01-01

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-17573-01-02

View scope
DAKKS

ISO/IEC 17025

Active

D-PL-17573-01-03

View scope

Location

Industrieparkstraße 1, Burgkirchen an der Alz, 84508, DE

48.17729, 12.71919

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.