Registers refreshed 2026-11-08.See refresh dates
United States

Gentherm

38455 Hills Tech Dr., 48331, Farmington Hills, MI, United States

Visit website
A2LA 2396.01A2LA 2396.02ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
16
A2LA certificates
2
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 16 standard numbers and the 15 official names we hold. When no standard matches, it searches the method text of every scope line.

IEC 60068 series7
IEC 60068-2-1Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-2Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-3
IEC 60068-2-14Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-30Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-38Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
IEC 60068-2-78Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
ISO4
ISO 7637-2Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
ISO 10605Road vehicles - Test methods for electrical disturbances from electrostatic discharge
ISO 16750-2Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
ISO 11452 series4
ISO 11452-2Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
ISO 11452-3Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: Transverse electromagnetic (TEM) cell
ISO 11452-4Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
ISO 11452-9Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters
Other standards1
CISPR 25Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers

Read from the A2LA scope documents we downloaded on 2026-10-27. Register refreshed 2026-11-06.

Scope as published by A2LA

5 lines
A2LA

ISO/IEC 17025

Active

2396.01

The scope document we hold says it is valid until 2028-03-31.

View scope

Accredited scope, certificate 2396.01

LineMethodMatrixRange
1DIN EN/IEC 60068-2-1; DIN EN/IEC 60068-2-2; DIN EN/IEC 60068-2-14; DIN EN/IEC 60068-2-3; DIN EN/IEC 60068-2-30; DIN EN/IEC 60068-2-38; DIN EN/IEC 60068-2-78; CMVSS/FMVSS 302; TSM0500G; MS 300-08; HES C 206-12; HES D 6003-09; DVM-0006-ST; DBL 5307; NES M0094; GMW3221; GMW3232; GB8410; GENTHERM – PLM GT-GL-LAB-PR01-WI52; GENTHERM – PLM GT-FH-LAB-PR02-WI09; GENTHERM – PLM GT-NA-LAB-PR01-WI02; GENTHERM – PLM GT-FH-LAB-PR02-WI08; GENTHERM – PLM GT-GL-PC-PR01-WI10; GENTHERM – PLM GT-GL-LAB-PR01-WI92automotive seat heater systems; heated/vented seats and control modules; heated steering wheels and control modules; related components-45 to 110 °C
2IPC-TM-650 (Section 2.1.1)--
3ISO/IEC 17025:2017--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

A2LA

ISO/IEC 17025

Active

2396.02

The scope document we hold says it is valid until 2028-03-31.

View scope

Accredited scope, certificate 2396.02

LineMethodMatrixRange
1CISPR 25; ISO 7637-2; ISO 7637-3; ISO 11452-2; ISO 11452-3; ISO 11452-4; ISO 11452-9; ISO 10605; ISO 16750-2automotive heater systems; automotive battery thermal management systems; heated steering wheels; blower and control modules; related components-
2ISO/IEC 17025:2017--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

38455 Hills Tech Dr., Farmington Hills, MI, 48331, US

42.48531, -83.37716

Open in Maps
← All accredited testing labs in Michigan
← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.