SGS Mexico SA de CV - Automotive
Industria Eléctrica 19 PB, Naucalpan, Naucalpan de Juárez, 53489, Mexico, Naucalpan de Juárez, Mexico
Visit website- Accredited standards
- 73
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 73 standard numbers and the 35 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM30
ASTM B571
ASTM D412
ASTM D471
ASTM D523Standard Test Method for Specular Gloss
ASTM D543
ASTM D638Standard Test Method for Tensile Properties of Plastics
ASTM D714
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D882
ASTM D896
ASTM D903
ASTM D1004
Show all 30
ASTM D1424
ASTM D1922
ASTM D2616
ASTM D3167
ASTM D3330
ASTM D3359
ASTM D3512
ASTM D3776
ASTM D3786
ASTM D3884
ASTM D3939
ASTM D4060
ASTM D4966
ASTM D4970
ASTM D5034
ASTM D5035
ASTM D6413
ASTM D7264
ISO23
ISO 175Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 178Plastics - Determination of flexural properties
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 1923Cellular plastics and rubbers - Determination of linear dimensions
ISO 2409Paints and varnishes - Cross-cut test
ISO 2812-3Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
ISO 2812-4Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°
ISO 3668Paints and varnishes - Visual comparison of colour of paints
ISO 4578Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating-roller method
ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO 5470-2Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader
Show all 23
ISO 11339Adhesives - T-peel test for flexible-to-flexible bonded assemblies
ISO 12219-2Interior air of road vehicles - Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Bag method
ISO 12945-1Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting - Part 1: Pilling box method
ISO 12945-3Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting - Part 3: Random tumble pilling method
ISO 12947-2Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown
ISO 13934-1Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 13937-1Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)
ISO 14125Fibre-reinforced plastic composites - Determination of flexural properties
ISO 14184-1Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method)
ISO 16000-7Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
ISO 17076-2Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method
AATCC8
AATCC 8
AATCC 16
AATCC 22
AATCC 42
AATCC 61
AATCC 79
AATCC 116
AATCC 127
ISO 105 series6
ISO 105-A02Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour
ISO 105-A03Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining
ISO 105-A05Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating
ISO 105-B02Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
ISO 105-E04Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration
ISO 105-X12Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing
ISO 8124 series3
ISO 8124-3Safety of toys - Part 3: Migration of certain elements
ISO 8124-5Safety of toys - Part 5: Determination of total concentration of certain elements in toys
ISO 8124-6Safety of toys - Part 6: Certain phthalate esters
Other standards3
EN 1464
VDA 270
VDA 621
ISO 12947 PARTS 1-4; ASTM D4966; ASTM D4970/4970M; ISO 17076-2; PV 3961; DBL 5327; ISO 5470; ASTM D3884; ASTM D4060; GMW1444_4.4.6; GM9515P; GMW3208; BN108-02; NES M0154; ISO 105-X12; AATCC TM 8; AATCC TM 116; TL 52280; PV 12.52; PR263; AA-0274_3.5; GMW3041; GMW3368; 9.03182; ISO 9211-4-03-1; ISO 2409; ASTM D3359; ASTM B571_13; DBL 1302; DBL 1278; MBN 10494-5_5.5; AA-0180; AA-0026; AA-0213; GS 94007; GM 9071P; GM 9502P; GMW14829; GM 9504P; FLTM BI 106-01; TM-0043C-G; DBL 8465; ASTM D543; ASTM D471; ASTM D896; ISO 175; VDA 621-412; ISO 2812-3; ISO 2812-4; TL 52451; PV 3964; TL 52631; VW 50123; TL 226; MBN 10494-7_5.3; DBL 5404; DBL 5578; PR263; FLTM BI 113-02; FLTM BI 168-01; FLTM BO 101-05; FLTM BI 152-01; TP-0000703; GMW14864; GMW 16625; GMW14124_4.5.12; GMW1444_4.5.16; GMW1444_4.5.17
ISO 13937-1; ASTM D 1424; ASTM D1922; ASTM D638; ASTM D412; ASTM D882; ASTM D5034; ASTM D5035; ISO 527-1,2; ASTM D903; ISO 11339; ASTM D1004; ISO 13934-1; ASTM D3330-4; DBL 5404; DBL 1232; DBL 1224; LP-463KB-2-01; GMW3010; MW3041; GS93010-2; TSL5100G; TL 52388; PV 3946; VW 50123; ASTM D3167; ISO 4578; EN 1464; PV 2034; TL 52018; TP-0000628; GMW15960; GM 3604M; GMW15671; ASTM D7264; ISO 178; ASTM D790; ISO 14125; TL 52631; TL 52231; ISO 1923; TSL 2100G; FLTM BN114 -01; ISO 8124-3; ISO 8124 -5; ISO 8124 -6; ISO 12219 -2; ISO 16000; NES M0402; 0094Z-T7S-0001; M300-55; MES CF080H; TP-0001008; PV 3925; ISO 14184 -1
ISO 2813; ASTM D523; AA-0101; VW 50196; TL 52631; VW 50190; ASTM D2616 -19; PV 3965; ISO 105 -A02; ISO 105 -A03; ISO 3668; ISO 4628- 1; ASTM D714; ASTM D2616; ISO 105- A05; PR263 Item 3.2.1.8; GMW14264; GMW6992; GMW3041; DB L 5471; ASTM D6413; CFR 1610; CAN/CGSB-4.2 No. 27.5; VDA 270; SAE J1351; MS300-34; GMW14131; GMW3205; GMW3041; NES M0160; HES D 6506; 0096Z-SEC-000; PV3900; VW 50180; TSM 0505 G; AATCC 79; PV 3922; AATCC 22; AATCC 42; AATCC 127; GM 9240P; GM 9517P; GMW14444; GMW14334; ISO 105-E04; ASTM D3512/D3512 M; ISO 12945 -3; PV 3360; NES M0154; ISO 12945-1; ASTM D3939/ D3939M -2013; BN108 -07; BN108 -11; D443116; ASTM D3786; ISO-105-C06; AATCC 61; ISO 105 E01; AATCC TM 16.3 Option 3; ISO 105 -B02; ASTM D3776
Read from the A2LA scope document we downloaded on 2026-08-05. Register refreshed 2026-10-23.
Scope as published by A2LA
5 lines
ISO/IEC 17025
Active7606.01
The scope document we hold says it is valid until 2028-06-30.
Accredited scope, certificate 7606.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO 12947 PARTS 1-4; ASTM D4966; ASTM D4970/4970M; ISO 17076-2; PV 3961; DBL 5327; ISO 5470; ASTM D3884; ASTM D4060; GMW1444_4.4.6; GM9515P; GMW3208; BN108-02; NES M0154; ISO 105-X12; AATCC TM 8; AATCC TM 116; TL 52280; PV 12.52; PR263; AA-0274_3.5; GMW3041; GMW3368; 9.03182; ISO 9211-4-03-1; ISO 2409; ASTM D3359; ASTM B571_13; DBL 1302; DBL 1278; MBN 10494-5_5.5; AA-0180; AA-0026; AA-0213; GS 94007; GM 9071P; GM 9502P; GMW14829; GM 9504P; FLTM BI 106-01; TM-0043C-G; DBL 8465; ASTM D543; ASTM D471; ASTM D896; ISO 175; VDA 621-412; ISO 2812-3; ISO 2812-4; TL 52451; PV 3964; TL 52631; VW 50123; TL 226; MBN 10494-7_5.3; DBL 5404; DBL 5578; PR263; FLTM BI 113-02; FLTM BI 168-01; FLTM BO 101-05; FLTM BI 152-01; TP-0000703; GMW14864; GMW 16625; GMW14124_4.5.12; GMW1444_4.5.16; GMW1444_4.5.17 | textile and automotive products | - |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 7606.01) Revised 06/26/2026 Page 2 of 4
Test Discipline Test Name Test Method(s)1
Accelerated Aging
Environmental Cycling
IEC 60068-2 Items 14 and 38; ASTM D2247;
ISO 2440;
PV 1200; PV 2005; PV 2044_KWL1, KWL2, KWL3;
TL957 Table 18 cons. 4; TL 52451 Item 3.6 table 2 –
4.4, TL 52280 Table 2 items 1.4, 1.5; TL 226 Table 2
cons. 4.2, 5.1); NES M0132; PR303.6; PR308.2;
PR263 Item 3.3.1.1; FLTM BQ 104-07; TP-0000706;
TM-0031T-Y Item 3.3.3; TP-0000588; GMW14124
except 4.5.7, 4.5.12, 4.5.17, 4.5.20, 4.5.21, 4.5.22;
GMW14444_4.5.11, 4.5.13; GM 9505P;
DBL 5471 Table 4 cons. 1; DBL 1665 Table
A.9; MBN 51000-4
Heat & Humidity
ISO 188; PV 2504 Item 3.2; PV 2044_KL3; TL 52451
Item 3.6 table 2 – 3.2; TL 52280 Table 2 items 1.4;
PR263 Item 3.3.1.3; GM 4465P
Aging
Hot/Cold
IEC 60068-2; PV 2044 _ KL1, KL2; TL957 Table 18
cons. 1, 2, 3, and 5; TL 52451 Item 3.6 table 2 – 4.1;
TL 52280 Table 2 items 1.2, 1.3; TL 226 Table 2 cons.
4.1; PR263 Item 3.3.1.1; FLTM BO040- 01; TM-
0031T-Y Item 3.3.1; GMW14444_4.5.12; DBL 8465
Table 12; DBL 1665 Table A.11; DBL 5471 Table 6-
Zone1-B, Zone2-A2, Zone3-A, Zone4-A2, Zone5-A2;
Table 7-Zone1-A2, Zone2 - A2, Zone5-A2; Table8-
Zone1-A2, Zone2-A2, Zone5-A2; Table 9 - Zone1-A2,
Zone2 - A2, Zone3 - A2; ANSI/SAE Z26.1Item
5.5; IEC 60068-2 Item 1 (except temperatures above
150°C) and 2 (except temperatures below -40°C);
ASTM D1204; PV 2503 Item 2.1; LP-463LB-13-01;
PV 2044_KL4; TL 52451 Item 3.6 table 2 – 4.3;
TM-0031T-Y Item 3.3.4
Humidity
ASTM Dl 735; ISO 6270-2, CH condition; ANSI/SAE
Z26.1 Item 5.3, GB9656 Item 5.5.4, UN Regulation
No. 43-Rev.4 Item A3/7; TL 226 Table 2 cons. 5.1;
PR263 Item 3.3.1.6; TM-0043C-G Item 3.2.3;
GMW14729; DBL 8465 Table 14; DBL 1665 Table
A.13
Moist Heat Cycle
(Water Immersion)
TL 52280 Table 2 items 1.6; PR263 Item 3.3.2.1; TM-
0031T-Y Item 3.3.3; GMW4217; ASTM D870; FLTM
BI 104-01; FLTM BI 104-04; TM-0031T-Y Item 3.3.2
Thermal Shock DBL 8465 Table 13; DBL 1665 Table A.13;
IEC 60068-2- Item 14
Wet Heat Aging (Water
Immersion with Heat)
TL 52280 Table 2 items 1.7 | ||
| 3 | ISO 2813; ASTM D523; AA-0101; VW 50196; TL 52631; VW 50190; ASTM D2616 -19; PV 3965; ISO 105 -A02; ISO 105 -A03; ISO 3668; ISO 4628- 1; ASTM D714; ASTM D2616; ISO 105- A05; PR263 Item 3.2.1.8; GMW14264; GMW6992; GMW3041; DB L 5471; ASTM D6413; CFR 1610; CAN/CGSB-4.2 No. 27.5; VDA 270; SAE J1351; MS300-34; GMW14131; GMW3205; GMW3041; NES M0160; HES D 6506; 0096Z-SEC-000; PV3900; VW 50180; TSM 0505 G; AATCC 79; PV 3922; AATCC 22; AATCC 42; AATCC 127; GM 9240P; GM 9517P; GMW14444; GMW14334; ISO 105-E04; ASTM D3512/D3512 M; ISO 12945 -3; PV 3360; NES M0154; ISO 12945-1; ASTM D3939/ D3939M -2013; BN108 -07; BN108 -11; D443116; ASTM D3786; ISO-105-C06; AATCC 61; ISO 105 E01; AATCC TM 16.3 Option 3; ISO 105 -B02; ASTM D3776 | Textiles | - |
| 4 | ISO 13937-1; ASTM D 1424; ASTM D1922; ASTM D638; ASTM D412; ASTM D882; ASTM D5034; ASTM D5035; ISO 527-1,2; ASTM D903; ISO 11339; ASTM D1004; ISO 13934-1; ASTM D3330-4; DBL 5404; DBL 1232; DBL 1224; LP-463KB-2-01; GMW3010; MW3041; GS93010-2; TSL5100G; TL 52388; PV 3946; VW 50123; ASTM D3167; ISO 4578; EN 1464; PV 2034; TL 52018; TP-0000628; GMW15960; GM 3604M; GMW15671; ASTM D7264; ISO 178; ASTM D790; ISO 14125; TL 52631; TL 52231; ISO 1923; TSL 2100G; FLTM BN114 -01; ISO 8124-3; ISO 8124 -5; ISO 8124 -6; ISO 12219 -2; ISO 16000; NES M0402; 0094Z-T7S-0001; M300-55; MES CF080H; TP-0001008; PV 3925; ISO 14184 -1 | Textile; Elements; VOC; Aldehyde | - |
| 5 | ISO/IEC 17025:2017 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Industria Eléctrica 19 PB, Naucalpan, Naucalpan de Juárez, 53489, Mexico, Naucalpan de Juárez, MX
19.47884, -99.23280
Open in MapsAccreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.