Registers refreshed 2026-11-08.See refresh dates
Germany

Siempelkamp Gießerei

Siempelkampstraße 45, 47803, Krefeld, Germany

DAKKS D-PL-17227-01-00ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
16
DAKKS certificate
1
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 16 standard numbers and the 13 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO9
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 643Steels - Micrographic determination of the apparent grain size
ISO 945-1Microstructure of cast irons - Part 1: Graphite classification by visual analysis
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 9016Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
ISO 9934-1Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 16810Non-destructive testing - Ultrasonic testing - General principles
EN7
EN 1369Founding - Magnetic particle testing
EN 1370
EN 1371-1Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
EN 3452-1
EN 12454
EN 12680-3Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings
EN 13018Non-destructive testing - Visual testing - General principles

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

4 lines
DAKKS

ISO/IEC 17025

Active

D-PL-17227-01-00

View scope

Accredited scope, certificate D-PL-17227-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025metallische Werkstoffe und Schweißverbindungen-
2DIN EN ISO 6892 -1 2017-02 Metallische Werkstoffe - Zugversuch - Teil 1; DIN EN ISO 148 -1 2017-05 Metallische Werkstoffe - Kerbschlagbiegeversuch nach Charpy - Teil 1: Prüfverfahren DIN EN ISO 9016 2013-02; DIN EN ISO 6506 -1 2015-02; DIN EN ISO 6507 -1 2018-07; ISO 6892 -1 2017-02 Metallische Werkstoffe - Zugversuch - Teil 1Metallische Werkstoffe; Schweißverbindungen an metallischen Werkstoffen; Festkörpern-
3DIN EN ISO 945 -1 2019-10 Mikrostruktur von Gusseisen - Teil 1: Graphitklassifizierung durch visuelle Auswertung DIN EN ISO 643 2013-05; DIN EN ISO 16810 2014-07; DIN EN ISO 9934 -1 2017-03 Zerstörungsfreie Prüfung - Magnetpulverprüfung - Teil 1; DIN EN 12680 -3 2012-02 Gießereiwesen - Ultraschallprüfung - Teil 3: Gussstücke aus Guss - eisen mit Kugelgraphit 4; DIN EN 1369 2013-01Metal-
4DIN EN 3452 -1 2014-09 Zerstörungsfreie Prüfung - Eindringprüfung - Teil 1; DIN EN 1371 -1 2012-02 Gießereiwesen - Eindringprüfung - Teil 1; DIN EN 13018 2016-06; DIN EN 12454 1998-07; DIN EN 1370 2012-03--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Siempelkampstraße 45, Krefeld, 47803, DE

51.35241, 6.53130

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.