Registers refreshed 2026-11-08.See refresh dates
Sweden

Metsä Board Sverige

Husum fabrik, 896 80, Husum, Sweden

Visit website
SWEDAC a003295-001SWEDAC A003295-001ISO/IEC 17025Register refreshed 2026-11-08

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
4
SWEDAC certificates
2
Site in our directory
1
SWEDAC accredited scope

What this lab is accredited for

Our reading of the SWEDAC scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 4 standard numbers and the 4 official names we hold. When no standard matches, it searches the method text of every scope line.

EN 872Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
EN 27888Water quality - Determination of electrical conductivity
ISO 9562Water quality - Determination of adsorbable organically bound halogens (AOX)
ISO 10523Water quality - Determination of pH

Read from the scope as published by SWEDAC. Register refreshed 2026-11-08.

Scope as published by SWEDAC

2 lines
SWEDAC

ISO/IEC 17025

Active

a003295-001

View on SWEDAC

Accredited scope, certificate a003295-001

LineMethodMatrixRange
12012; SS-EN ISO/IEC 17025:2018 Mets; SS-EN ISO 9562:2005 Adsorbtion/Coulo metrisk titrering 5; SS-EN 27888; SS-EN ISO 10523:2012 Elektrod 3-10 pH-enheter Avloppsvatten/Lakvatt en Nej SuspenderadeSewageSee scope document

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

SWEDAC

ISO/IEC 17025

Active

A003295-001

View on SWEDAC

Accredited scope, certificate A003295-001

LineMethodMatrixRange
1SS-EN ISO/IEC 17025:2018; SS 028148; SS-EN ISO 9562:2005; SS 028136; SS-EN 27888; SS-EN ISO 10523:2012; SS-EN 872:2005SewageSee scope document

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Husum fabrik, Husum, 896 80, SE

63.32910, 19.16400

Open in Maps
← All accredited testing labs in Sweden

Labs with overlapping accredited scope in Sweden

Accreditation data refreshed from the SWEDAC register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the SWEDAC entry linked above.