2 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform ASTM D5185 testing. From the accredited scope text: “ASTM D5185) H Analysis of used oils for: Chlorine Sulphur In-House Documented Procedures 183 using EDXRF (based on IP 336) H Kinematic Viscosity at 40C, 100C and 100F (37.78C) ASTM D445 and IP71 H Det” “ASTM D5185 by ICP Elemental Analysis: Ag, Al, B, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Mo, Ni, P, K, Na, Pb, S, Si, Sn, Ti, V, Zn. ASTM D5185 by ICP AES PETROLEUM and PETROLEUM PRODUCTS, ADDITIVES, OILS and LUB”
Only 2 labs match this combination. Try broader options below.
See all accredited labs in United Kingdom or browse other methods such as EN ISO 17892-1:2014, EN 12390-3, EN 12390-2.
Essex, GB
ASTM D5185) H Analysis of used oils for: Chlorine Sulphur In-House Documented Procedures 183 using EDXRF (based on IP 336) H Kinematic Viscosity at 40C, 100C and 100F (37.78C) ASTM D445 and IP71 H Determinati
3 Saddle Road, Cedar Knolls, New Jersey 07927, United States, GB
ASTM D5185 by ICP Elemental Analysis: Ag, Al, B, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Mo, Ni, P, K, Na, Pb, S, Si, Sn, Ti, V, Zn. ASTM D5185 by ICP AES PETROLEUM and PETROLEUM PRODUCTS, ADDITIVES, OILS and LUBRICANTS Evaporation lo
This page is a fixed slice of the register: every ASTM D5185 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.