10 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform BS 1377-3 testing. These labs commonly handle Drinking water matrices. From the accredited scope text: “BS 1377-3: 2018 + A1: 2021 Watford Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe ASTM D5334 – 22A Watford Dry density/moisture content relationship ( 4.5 kg rammer) BS 1377- 4:199” “BS 1377-3:2018 +A1: 2021 Laboratory Determination of organic matter content BS 1377-3: 2018 +A1 2021 Laboratory Total Sulphur BS 1377-3: 2018 +A1 2021 HTC and Infrared Laboratory Loss on ignition BS 1” “BS 1377-3:2018 A One-dimensional consolidation properties BS 1377:Part 5:1990 A Swell strain using an oedometer Documented In-House Method based on BS 1377:Part 5 A Permeability in a triaxial cell BS” “BS 1377-3:2018+A1:2021 B Rock and Natural Stone Determination of point load strength and anisotropy indices The Complete ISRM Suggested Methods – Rock Characterization Testing and Monitoring 1974 – 20”
Hertfordshire, GB
BS 1377-3:2018+A1:2021 B Rock and Natural Stone Determination of point load strength and anisotropy indices The Complete ISRM Suggested Methods – Rock Characterization Testing and Monitoring 1974 – 2006, Editors: R Ulusay &
Staffordshire, GB
BS 1377-3:2018 Lab Dry density/moisture content relationship (2.5 kg rammer) BS 1377-4:1990 Lab Dry density/moisture content relationship (4.5 kg rammer) BS 1377-4:1990 Lab Dry density/moisture content relationship
Doncaster, GB
BS 1377-3:2018 A One-dimensional consolidation properties BS 1377-5:1990 A
Leicester, GB
BS 1377-3: 2018 + A1:2021 Clause 7.5 Lab Acid-soluble sulfur (sulfate calculated) (ICPOES) BS 1377-3: 2018 + A1:2021 Clause 7.9 Lab Organic matter content BS 1377-3: 2018 + A1:2021 Clause 14 Loss on Igniti
West Yorkshire, GB
BS 1377-3:2018 +A1: 2021 Laboratory Determination of organic matter content BS 1377-3: 2018 +A1 2021 Laboratory Total Sulphur BS 1377-3: 2018 +A1 2021 HTC and Infrared Laboratory Loss on ignition BS 1377-3: 2018 +
Bristol, GB
BS 1377-3: 2018 Laboratory
Gwynedd, GB
BS 1377-3:2018 + A1:2021 A Sulphate content of soil and ground water - gravimetric method BS 1377-3:2018 + A1:2021 A pH value BS 1377-3:2018 + A1:2021 A Resistivity: open container method BS 1377-3:2018 + A1:2021 A
Glasgow, GB
BS 1377-3:2018+A1:2021 A Total dissolved solids BS 1377-3:2018+A1:2021 A pH value BS 1377-3:2018+A1:2021 A Dry density / water content relationship - 2.5 kg rammer - 4.5 kg rammer - vibrating hammer BS 1377-2:2022
Hertfordshire, GB
BS 1377-3:2018 A One-dimensional consolidation properties BS 1377:Part 5:1990 A Swell strain using an oedometer Documented In-House Method based on BS 1377:Part 5 A Permeability in a triaxial cell BS 1377:Part 6:1
Hertfordshire, GB
BS 1377-3: 2018 + A1: 2021 Watford Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe ASTM D5334 – 22A Watford Dry density/moisture content relationship ( 4.5 kg rammer) BS 1377- 4:1990 BS1377- 2: 2022
This page is a fixed slice of the register: every BS 1377-3 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.