Humberside Materials
North Lincolnshire, GB
EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 + AC 2020 Laboratory
34 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform EN 12390-3 testing. These labs commonly handle Drinking water, Concrete, Ambient air matrices. Most frequently tested analytes via this method in United Kingdom: Compressive Strength, Particle Size Distribution, Slump. From the accredited scope text: “EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 Laboratory Cored specimens - examining and testing in compression BS EN 12504-1:2019 Laboratory SOILS for ci” “EN 12390-3:2019 Brigstock Density BS EN 12390-7:2019 incorporating corrigendum November 2020 Brigstock CONCRETE - fresh Sampling composite and spot samples of fresh concrete on site BS EN 12350-1:2019” “EN 12390-3:2019 BSEN 12390-2:2019 BSEN 12390-1:2021 A Flexural strengths of prisms; including curing and dimensions BS EN 12390-5:2019 BS EN 12390-2:2019 BS EN 12390-1:2021 A Density BS EN 12390-7:201” “EN 12390-3: 2019 Laboratory SOILS for civil engineering purposes Moisture content BS1377-2:1990 Laboratory Particle density by gas jar method BS 1377-2:1990 Laboratory Determination of Liquid Limit -”
North Lincolnshire, GB
EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 + AC 2020 Laboratory
London, GB
EN 12390-3:2019 Density of hardened concrete BS EN 12390-7:2019 Laboratory Cored specimens - examining and testing in compression BS EN 12504-1:2019 Laboratory Depth of penetration of water under pressure BS EN 1
Huntingdon, GB
EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 A Density BS EN 12390-7:2019 A SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:1990 A Water content BS 1377-2:2022
Derby, GB
EN 12390-3: 2019 BS EN 12390-1: 2021 Laboratory Curing BS EN 12390-2: 2019 Laboratory Density BS EN 12390-7: 2019 Laboratory Cored specimens – taking, examining and testing in compression BS EN 12504-1: 2019 Labora
Kent, GB
EN 12390-3:2019 Lenham Curing (initial curing in air, then in water at 20°C) BS EN 12390-2:2019 Lenham Density of concrete cubes by measured size BS EN 12390-7:2019 Lenham Shape and dimensions of concrete cubes
Bridgend, GB
EN 12390-3:2009 BS EN 12390-2:2009 BS EN 12390-1:2012 Lab Density BS EN 12390-7:2009 Lab SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:1990 Lab Liquid limit - cone penetro
Nottinghamshire, GB
EN 12390-3:2019 A Making cubic specimens for strength tests, including curing. BS EN 12390-2:2019 A Shape, dimensions BS EN 12390-1:2021 A Density BS EN 12390-7:2019 A END
Barrhill, GB
EN 12390-3:2019 Density of hardened concrete BS EN 12390-7:2019 AC2020 END
Northamptonshire, GB
EN 12390-3:2019 Brigstock Density BS EN 12390-7:2019 incorporating corrigendum November 2020 Brigstock CONCRETE - fresh Sampling composite and spot samples of fresh concrete on site BS EN 12350-1:2019 Site
Southampton, GB
EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 B Density BS EN 12390-7:2019 B AGGREGATES Sampling stockpiles of fine and coarse aggregates by hand BS EN 932-1:1997 C Sample reduction by riffle box BS EN 93
Surrey, GB
EN 12390-3:2019 Woking Birmingham Compressive strength of cores BS EN 12504-1:2019 Woking Birmingham Density BS EN 12390-7:2019 Woking Birmingham CONCRETE - fresh Sampling fresh concrete on site BS EN 12350-1
Daventry, GB
EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 Daventry Density BS EN 12390-7:2019 + AC 2020 Daventry END
Dukinfield, GB
EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 Laboratory Cored specimens - examining and testing in compression BS EN 12504-1:2019 Laboratory SOILS for civil en
Kent, GB
EN 12390-3:2019 A Density BS EN 12390-7:2019 incorporating corrigendum November 2020 A
Warden, GB
EN 12390-3:2019 BS EN 12390-2:2019 A Density BS EN 12390-7:2019 incorporating corrigendum November 2020 A PILED FOUNDATIONS Pile integrity – low strain sonic integrity testing using a low strain sonic echo time doma
Brierley Hill, GB
EN 12390-3:2019 A Curing BS EN 12390-2:2019 A Shape, dimensions BS EN 12390-1:2021 A Density BS EN 12390-7:2019 Incorporating corrigendum November 2020 A Compressive strength of cores BS EN 12504-1:2019 Incorporat
Staffordshire, GB
EN 12390-3:2019 BS EN 12390-2:2019 A Shape, dimensions BS EN 12390-1:2021 A Density BS EN 12390-7:2019 A CONCRETE - Fresh Sampling of fresh concrete on site BS EN 12350-1:2019 B - composite sample - spot samp
London, GB
EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 Laboratory Cored specimens – examining and testing in compression BS EN 12504-1 :2019 Laboratory SOILS for civil eng
Tyne and Wear, GB
EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 Cleadon Lane Physical Tests Density BS EN 12390-7:2019 + AC 2020 Cleadon Lane MORTARS, SCREEDS and PLASTERS Mechanical Tests Compressive strength - inc
Norfolk, GB
EN 12390-3:2009 BS EN 12390-2:2009 Density BS EN 12390-7:2009 END
Ibstock, GB
EN 12390-3:2019 A Density BS EN 12390-7:2019 A END
Durham, GB
EN 12390-3:2019 BS EN 12390-2:2019 BS EN 12390-1:2021 A Density BS EN 12390-7:2019 A SOILS for civil engineering purposes Moisture content - oven drying method BS 1377--2:1990 B Liquid limit - cone penetrometer
Coatbridge, GB
EN 12390-3:2019 BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 + AC 2020 Laboratory END
West Yorkshire, GB
EN 12390-3:2019 BS EN 12390-1:2021 Laboratory Curing BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 Laboratory SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:202
Glasgow, GB
EN 12390-3:2019 A, C*, D*, F*, G*, J*, K*, Flexi Shape, Dimensions BS EN 12390-1:2021 A, C*, D*, F*, G*, J*, K*, Flexi Density BS EN 12390-7:2019 A, C*, D*, F*, G*, J*, K*, Flexi Cored specimen - examination
Ashover, GB
EN 12390-3:2019 B Density BS EN 12390-7: 2019 +A2:2022 B
Northern Ireland, GB
EN 12390-3:2019 BS EN 12390-1:2021 BS EN 12390-2:2019 A A A Density BS EN 12390-7:2019 Incorporating corrigendum November 2020 A Cored specimens - examining and testing in compression BS EN 12504-1:2019 A Te
Durham, GB
EN 12390-3:2019 BS EN 12390-2:2019 A Density BS EN 12390-7:2019 A SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:1990 A, B Liquid limit - cone penetrometer - definitive
North Linconshire, GB
EN 12390-3:2019 BS EN 12390-1:2012 BS EN 12390-2:2019 Physical Tests Density BS EN 12390-7:2019 + AC 2020 END
London, GB
EN 12390-3:2019 Laboratory Compressive strength of cores BS EN 12504-1:2019 including corrigendum November 2020 Laboratory Density BS EN 12390-7:2019 including corrigendum November 2020 Laboratory Concrete rebo
Bristol, GB
EN 12390-3:2019 BS EN 12390-2:2019 BS EN 12390-1:2021 B Density BS EN 12390-7:2019 Incorporating corrigendum November 2020 B SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:1990 B
Kent, GB
EN 12390-3:2019 BSEN 12390-2:2019 BSEN 12390-1:2021 A Flexural strengths of prisms; including curing and dimensions BS EN 12390-5:2019 BS EN 12390-2:2019 BS EN 12390-1:2021 A Density BS EN 123
Birmingham, GB
EN 12390-3:2019 A Curing BS EN 12390-2:2019 A, B & C Flexural strength of test specimens BS EN 12390-5:2019 A Density BS EN 12390-7:2019 A Shape and Dimensions BS EN 12390-1:2021 A Cored specimens
Liverpool, GB
EN 12390-3: 2019 Laboratory SOILS for civil engineering purposes Moisture content BS1377-2:1990 Laboratory Particle density by gas jar method BS 1377-2:1990 Laboratory Determination of Liquid Limit - One Point Cone Pen
This page is a fixed slice of the register: every EN 12390-3 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.