ASTM A574 Accredited Testing Labs Worldwide
10 accredited laboratories in 3 countries hold ASTM A574 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM A574 scope entries most often cover Al, Tensile Strength in Plastics.
Available in 3 Countries
Top matrices for ASTM A574
Top analytes for ASTM A574
- Al (1)
- Tensile Strength (1)
Sample labs
ASTM A574, A574M (2012), F788 (Exclude Sec. S1), F812, F912; ISO 6157-1; 6157-2, 6157-3 (Exclude Sec. 3.6); XRF PMI Analysis Internal Procedure QA7T-96 Stainless Steel Fe, Cr, Ni, Mn, Mo, Cu
ASTM A574, E1077, F2328; SAE J121, J419 SAE ARP 1820, ISO 898-5 (6.2) Ferrite Rating AMS 2315 Graphite in Castings / Nodularity ASTM A247; GM9095P Grain Size (Comparison Method) / Oxidation Method / McQuaid Ehn) ASTM E112, E930 Volu
ASTM A574, A574M; AWS D1.1, D1.3, D15.1; MIL-STD-271 (Withdrawn May 1998), MIL-STD-2132; NAVSEA 250-1500-1, NAVSEA T9074-AS-GIB-010/271; Leak Testing1 Gas Detection ANSI N14.5; ASME Section III, Section V Article 10, Section VIII
ASTM A574, A574M, F788/F788M, F812/F812M; ISO 6157-1, 6157-2, 6157-3; SAE J123, J122 Coating/Plating Thickness by X-Ray Thickness by Microscopical Examination Weight/Mass per Area ASTM B568 ASTM B487 ASTM A90/A90
ASTM A574/A574M (2015), F788 (Exclude S1), F812 (Exclude sec. 6.5.2 and 7.1), F912/F912M (2015); ISO 6157-1, 6157-2 Tensile & Shear Test for Rivet IFI 135 Twist Test for Split Lock Washer ASME B18.21.1 Chemical Composition
ASTM A574, F788/F788M, F812/F812M; SAE J122 (Withdrawn 2017), J123 (Withdrawn 2012), J1061 (Withdrawn 2012) Coating Thickness ASTM B487 Volume Fraction ASTM E562 Intergranular Corrosion ASTM A262, Practice A Failure Analysis U
ASTM A574 ASTM F835 ASTM F3125/F3125M
ASTM A574/A574M, E340, F788/F788M, F812/F812M; ISO 6157-1, 6157-2, 6157-3; SAE J122, J123 Coating/Plating Thickness – X-Ray ASTM B568 (Zn/Fe, Ni/Fe, Ni/Cu, ZnNi/Fe) Coating/Plating Thickness – Microscopic Method ASTM B487 Salt
ASTM A574, F788, F812; ISO 898-1 Failure Investigation Using the methods listed in the Scopes of Accreditation 0510.01 and 0510.02 in accordance with the ASM Handbook Volume 11 Grain Size Exam ASTM E112, E930, E1181 Graphite Mic
ASTM A574, E1077, F2328; ISO898-1, 898-5, 4570; SAE J78, J81, J419, J423, J933 Examination and Evaluation of Pitting Corrosion ASTM G46; BSS7219 Grain Size (Comparison) ASTM E112, E930, E1181; ISO 643; ASTM A262 (Practice A & E)