ASTM D2583 Accredited Testing Labs Worldwide
13 accredited laboratories in 5 countries hold ASTM D2583 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D2583 scope entries most often cover Hardness, Stiffness, Textile Glass in Plastics, Metal.
Available in 5 Countries
Top matrices for ASTM D2583
Top analytes for ASTM D2583
- Hardness (2)
- Stiffness (1)
- Textile Glass (1)
Sample labs
ASTM D2583 Compression Set ASTM D395 Method B, ASTM D1414 Uniaxial Tensile Properties ASTM D412 (Method A), ASTM D1414, ISO 37, ASTM D638 Tear Strength ASTM D624 Types C and T Aging ISO 23936-1, NACE TM0187, NACE TM0296 Aging and RGD
ASTM D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by means of a Barcol Impressor ASTM D2718 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear) ASTM D2915 Standard Practice for S
ASTM D2583a 2013 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor 10 Metrische Bestimmung von Kunststofffolien durch mechanische Abtastung DIN 53370 20 06-11 Prüfung von Kunsts
ASTM D2583-13a Byggprodukter Ja 2 Ackrediteringens omfattning är flexibel enligt vad som anges i detta beslut. Det ackrediterade organet skall alltid kunna tillhandhålla en uppdaterad lista över den aktuella omfattningen för sin ackrediter
ASTM D2583-13a UNE 53270 Temperatura de flexión bajo carga (Tª ambiente a 200 °C) Determination of temperature of deflection under load. (Room temperature up to 200 °C) UNE-EN ISO 75-1 UNE-EN ISO 75-2 Resistencia a la cizalla inter
ASTM D2583 Test Method for Indentation Har dness of Rigid Plastics by Means of a Barcol Impressor ASTM D2584 Test Method for I gnition Loss of Cured Reinforced Resins ASTM D2734 Void Content of Reinforced Plastics ASTM D2857 Standa
ASTM D2583; IPC-TM-650 (Method 2.4.27.2) Corrosion of Flux using Temperature/Humidity Chamber IPC-TM-650 (Method 2.6.15) Hydrolytic Stability/Temperature/Humidity Aging IPC-TM-650 (Methods 2.6.11 and 2.6.11.1); MIL-I-460583; IPC-SM
ASTM D2583 Rubber At least once a year Hardness Hardness Shore A, ISO 868 / ISO 7619 / ISO 48, Hardness Shore A ASTM D2240, IRHD-Hardness (method M) ISO 48, IRHD-Hardness (method N) ISO 48 Metals At least once a year Hardn
ASTM D2583 Test Method for Ignition Loss of Cured Reinforced Resins ASTM D2584 Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes ASTM D6693/D6693M Standa
ASTM D2583 Block Loading ASTM D3354 Bulk Density ASTM D1895 (B) Capillary Rheometry ASTM D3835; ISO 11443 Chip Resistance ASTM D3170; SAE J400 Coefficient of Friction ASTM D1894 Compression Set ASTM D395 (B); ISO
ASTM D2583 Standard test method for indentation hardness of rigid plastics by means of a Barcol impressor ASTM D2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings ASTM D2842 Standard test method for w
ASTM D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor ASTM D2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings ASTM D2718 Standard Test Methods
ASTM D2583 2013 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor ASTM D2584 2018 Standard Test Method for Ignition Loss of Cured Reinforced Resins ASTM D2734 2016 Standard