ASTM D4585 Accredited Testing Labs Worldwide
10 accredited laboratories in 3 countries hold ASTM D4585 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D4585 scope entries most often cover Fogging in Water, Materials.
Available in 3 Countries
Top matrices for ASTM D4585
Top analytes for ASTM D4585
- Fogging (1)
Sample labs
ASTM D4585/D4585M; Ford BI 104-02; ISO 6270-1 Condensing Humidity Condensation ASTM D1748 ; ASTM D2247; ISO 6270-2; VOLVO STD 423-0018 Humidity Honda HES D6501, Section 3.19; SAE J1389 Water Fog ASTM D1735; GM 4465P (2011); GMW
ASTM D4585; ISO 6270-1 Examination and Rating ASTM D714; ASTM D610; ASTM D1654; API RP 5L7, Appendix 15; API RP 5L9, Appendix K; CSA Z245.20, Sections 12.9 and 12.10; ISO 4628-2; ISO 4628-3; ISO 4628-4; ISO 4628-5; ISO 4628-8;
ASTM D4585; Condensing Ford BI 104-02, BI 106-03, BQ 104-02; Cleveland Condensing GMW14729 Impact Gardner ASTM D2794, ASTM D5420 (Geometry GC and GE); Ford BI 108-01, BO 151-01 (Method B [Impact Ball Shore A 72.5]) Odor Smell
Test Test Method(s): Paint/Coating Testing Pencil Hardness ASTM D3363 Tape Adhesion ASTM D3359; FLTM BI 106; GM 9502P2; ISO 2409 Coating Impact (Gardner) ASTM D2794; ISO 6272-1 Immersion in Liquids (Paints & Varnishes) ISO
ASTM D4585 Testing Water Resistance of Coatings Using Controlled Condensation ASTM D4587 Fluorescent UV Condensation Exposure of Paint and Related Coatings ASTM D4674 (Method III and IV) Accelerated Testing Color Stability of Indoor Pl
ASTM D4585 Testing Water Resistance of Coatings Using Controlled Condensation ASTM D4587 Fluorescent UV Condensation Exposure of Paint and Related Coatings ASTM D4674 (Method III & IV) Accelerated Testing Color Stability of Indoor Plas
ASTM D4585/D4585M; ISO 6270-1 1 Deviation from the standard to use a speed of 10 mm/s rather than the specified speed of 1 to 2 s/in 2 Deviation from the standard to use a 1” by 3” test coupon rather than the specified round test cou
ASTM D4585; CFFA-110; Ford FLTM BO 012-01, FLTM BQ 104-02; GM9215P (1988); GMW14124 Cycle T, GMW14357, GMW14729; Honda HES D20081, HES D6501; ISO 2440, ISO 6270-2, CH; Rivian RTS.1743, RTS.2792; SAE J1389 Impact Charpy / Izo
ASTM D4585; ASTM G198; DIN EN ISO 6270-2; Fuji TS430-07-089; GM 4465P (superseded 2011)1; GMW3044; GMW4700 (Label Compatibility); GMW14729; HES D6501 (Section 3.19); HES S84 (Section 6.8); Inteva MX900159; ISO 6270-2; Navistar M
ASTM D4585; ASTM D2247 Color ASTM D2244; ASTM E1164 Chip or Gravel Resistance ASTM D3170; SAE J400; GMW 14700 Adhesion ASTM D3359; FLTM BI 106-01; GMW 14829; ASTM D522; ISO 2409 Gloss/Haze Measurements ASTM D523 Evaluations ASTM D6