ASTM D785 Accredited Testing Labs Worldwide
11 accredited laboratories in 2 countries hold ASTM D785 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D785 scope entries most often cover Flammability, Fogging, Hardness in Plastics, Metal.
Available in 2 Countries
Top matrices for ASTM D785
Top analytes for ASTM D785
- Flammability (1)
- Fogging (1)
- Hardness (1)
Sample labs
ASTM D785 Density/ Specific Gravity ASTM D792 Flammability FMVSS 302
ASTM D785; ASTM E18; TSM0501G [REV. 16], Sect. 9.9.1 Appearance AATCC Grayscale Color scale Macbeth Lightbooth ASTM D1729; FLTM BI 109-01; GMW15357; JIS L 0804; MIL-STD-883, Method 2009; TS371-00-004 [2017], Sect. 1
ASTM D785; ISO 2039-2 Durometer (Shore A & D) ASTM D2240; DIN 53505 Tensile Properties of Plastics ASTM D412, D638; ISO 527-1; DIN 53504 Flexural Properties ASTM D790; ISO 178 Izod Impact (Method A) ASTM D256 Tear Resistance AS
ASTM D785 (Scale R) Rockwell Hardness of Plastics and Electrical Insulating Materials HDT/VICAT SOFTENING POINT Test Method Test ASTM D648 (Method A) Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D785 Rockwell Hardness of Plastics and Electrical Insulatin g Materials ASTM D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials ASTM D792 Test Methods for
ASTM D785 (R Scale), ASTM D2240 (Shore A, D), ASTM D3363; Ford FLTM BI 151-01; Honda HES D6501; ISO 48-4, ISO 868, ISO 2039-2, ISO 7619-1; Nissan NES M0142 HDT (Heat Deflection Temperature) / VICAT / SOFT POINT ASTM D648 (Method B
ASTM D785 Rubber Staining Resistance ASTM D925 Rubber Chemical Resistance ASTM D471 Rubber Aging ASTM D865 Scuffing FLTM BN 108-04 Scuff & Mar GM 9150P; GM14130 Shear ISO 4587 Soiling & Cleanability FLTM BN 112-08; GMW340
ASTM D785, E18, F606/F606M; SAE J429, J995 Impact Testing Izod Impact PM-14 ASTM D256 (Methods A, C, D, E) Unnotched Impact PM-14 ASTM D4812 Microhardness Knoop 100, 200, 300, 500g MT-09 ASTM B578, E384; ISO 9015-2, 6507-1
ASTM D785 HPLC / GPC ASTM D5296 w/ Shimadzu (unit mfr) Method; ISO 16000-3; ISO 13885-1 Humidity ASTM D1735; ASTM D2247; GMW14729; ASTM D3574-L Cleveland Condensing FLTM BI 104-02 (A & B) Impact Ball
ASTM D785 Flexural Properties ASTM D790; ISO 178 Density and Specific Gravity ASTM D792 (Method A); ISO 1183-1 (Method A) Melt Flow Rate ASTM D1238; ISO 1133-1 Durometer Hardness (D) ASTM D2240 High Speed Puncture
ASTM D785 ( except Section 9.2) Brinell (500 kg, 3000 kg) ASTM E10 Knoop and Vickers (HV0.1, HV0.2, HV0.3, HV0.5, HK0.05, HK0.1, HK0.2, HK0.3, HK0.5) ASTM E384, E92 Shore Hardness (A, D) ASTM D2240 Coatings Plating Adhesion ASTM