ASTM E662 Accredited Testing Labs Worldwide
13 accredited laboratories in 6 countries hold ASTM E662 in their accredited scope. We don't know yet whether 3 of them take outside work. Primary accreditors include American Association for Laboratory Accreditation.
Available in 6 Countries
Sample labs
DIN EN 1021 -2 2014 -10 Möbel - Bewertung der Entzündbarkeit von Polstermöbeln - Teil 2: Eine einem Streichholz vergleichbare Gasflamme als Zündquelle DIN 66084 2021 -02 Klassifizierung des Brennverhaltens von Polsterverbunden
ASTM E662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials ASTM F1506 Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Fl
ASTM E662 Specific Optical Density of Smoke Generated by Solid Materials 49 CFR 571.302 (FMVSS 302) Federal Motor Vehicle Safety Standards – Flammability of Interior Materials CMVSS 302 Canada Motor Vehicle Safety Standards – Flammabi
ASTM E662 Test Method for S pecific Optical Density of Smoke Generated by Solid Materials ASTM E831 Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis ASTM E990 Standard Specifications for
ASTM E662, ASTM F814; ISO 5659; ISO 5659-2:2017 14 CFR Appendix F to Part 25, Part V; FAA Aircraft Materials Fie Test Handbook, Chapter 6 Toxicity BSS 7239; DIN 5510-2 Appendix D.4 (Colorimetric Measurements) EN 17084 Met
ASTM E662 Standard test method for specific optical density of smoke generated by solid materials ASTM E800 Standard guide for measurement of gases present or generated during fires ASTM E814 Standard test method for fire tests of pen
ASTM E662; BSS 7238, BSS 7239; DS 02-711, DS 02-713; NES 711, NES 713; SMP800C; 2010 FTP Annex 1: Part 2; ISO 5659-2; NF X70-100-2 Acid Gas Generation Test MIL-DTL-24640B, para. 4.7.15; MIL-DTL-24643C, para. 4.8.23 Halogen Content M
ASTM E662 Standard test method for specific optical density of smoke generated by solid materials ASTM E970 Standard test method for critical radiant flux of exposed attic floor insulation using a radiant heat energy source ASTM E1353
ASTM E662:2019 A Fire resistance Methods of test required for the Fire classification of construction products and building elements ( BS EN 13501-3:2005+A1:2009 & BS EN 13501-4:2007+A1:2009) using data from the fire tests d
ASTM E662-21ae1 Prove al fuoco NFPA 130:2023 + 14 CFR 25 Appendix F ed 2023 Prove al fuoco NFPA 130:2023 + ASTM E648-25 Prove al fuoco NFPA 130:2023 + ASTM E162-25 Prove al fuoco NFPA 130:2023 + ASTM D3675-25 Prove al fuoco NFPA 13
ASTM E662 Conducteurs et Câbles électriques à âmes métalliques ou à fibres optiques Résistance au feu des câbles de petites dimensions sans protection pour utilisation dans les circuits de secours Exposition au feu dans des conditio
ASTM E662 B Determinación de la opacidad de humos en atmósfera no renovable (ver Nota 5) Determination of the Opacity Of The Fumes In An Atmosphere Without Air Renewal (See note 5) NF X 10-702-1 B Determinación del Índice de Oxígeno
Anexo Técnico/Technical Annex Nº 12/LE025 Rev./Ed. 92 Pág./Page 92 de/of 105 Accreditation will remain valid until notification to the contrary. This accreditation is subject to modifications, temporary suspensions and withdrawal. Its v