ASTM F519 Accredited Testing Labs Worldwide
13 accredited laboratories in 6 countries hold ASTM F519 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM F519 scope entries most often cover Hardness, Axial Tensile Strength, Charpy Impact in Metal, Water, Fasteners.
Available in 6 Countries
Top matrices for ASTM F519
Top analytes for ASTM F519
- Hardness (2)
- Axial Tensile Strength (1)
- Charpy Impact (1)
- Hydrogen Embrittlement (1)
- Ph (1)
- Tensile (1)
Sample labs
ASTM F519 Impact ASTM D2794; DMS 1786 Metallography: Metallographic Prep End Grain Pitting Intergranular Attack Notch Evaluation ASTM E3 ASTM F2111 ASTM F2111 Omega Research Procedure 9.0 Microhardness (HV100, HK25, HK100, H
ASTM F519 Jominy Hardenability ASTM A255 Microhardness ASTM E92, E384; SAE ARP 1820 Knoop (300, 500) g Vickers (100, 300, 500, and 10,000) g
ASTM F519, F606/F606M; NASM 1312-5 Verification (Stress Durability) USCAR-5, USCAR-7 Prevailing Torque IFI 100/107, ASME B18.6.6 Proof (Internal & External Threads) ASTM A370 (Annex A3), F606; SAE J429, J995; ISO 898-2, -6 Rotation
ASTM F519 Inclusion Content ASTM E45 (Method A & D) Alpha Case in Titanium Microscopic and Bend WMTR/QTP/MOG0241 Intergranular Attack and Intergranular Oxidation (IGA/IGO) WMTR/QTP/MOG0071 Preparation of Metallographic
ASTM F519, E139, E292 Proof Load Tests External ASTM A370, F606/F606M; NASM 1312-8; ISO 898-1 Internal ASTM A962/A962M, F606/F606M; EN 493; ISO 898-2, 10485; SAE J1216; GM510M (Section 6.1) (2011); DIN 267-4; IFI 100/107 Axial
ASTM F519 Intergranular Attack/End Grain Pitting ASTM F2111; BSS 7219 Microhardness Knoop (HK) (25, 100 and 500 g) Vickers (HV) (100 and 500 g) ASTM B578, E384 Plating/Coating Thickness ASTM B487 Salt Spray ASTM B117, G85
ASTM F519-23 Trazione nella direzione dello spessore/Through Thickness Tension testing (250 N - 250 kN) ASTM A770/A770M-03(2025) _ _ _ Valutazione delle inclusioni non metalliche/Micrografic method examination of non metallic inclusi
ASTM F519 Tensile Room Temperature Tensile (Up to 300KN) Tensile Strength, Yield Strength, Elongation, Reduction in Area ASTM A370, B557, E8/E8M; CAAS SAR (Chapter 6.5, Appendix 1) Elevated Temperature Tensile (Up to 8
ASTM F519 /
ASTM F519 Hardness Brinell (10/1000, 10/3000) ASTM A370, E10; GB/T 231.1 Microhardness Vickers (HV 0.05, HV 0.1, HV0.2, HV0.3, HV0.5, HV1.0 Kgf) ASTM E384; GB/T 4340.1 Rockwell (BW, C, 15N, 15TW, 30N, 30TW) ASTM A370, E18; GB/T 23
ASTM F519 1The laboratory is only accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material specifications listed below. The inclusion of these documents on this
ASTM F519, ASTM F606/F606M; SAE J81; MIL-STD-1312-5; NASM 1312-5, NASM 1312-14 Microhardness (10-1000 HV, 10-1000 Knoop) ASTM E384; MIL-STD-1312-6; NASM 1312-6 Proof Load of Full-Size Externally Threaded Fasteners ASTM A370, ASTM
ASTM F519 Impact AAMA 612 (8.7); AAMA 2603 (8.5); AAMA 2604 (8.5); AAMA 2605 (8.5); ASTM D2794; ASTM D5420; ISO 6272-1; ISO 6272-2; JIS K 5600-5-3 (6); Nissan NES M0007 (Method 27); PACCAR CMT0033 (9.10); Toyota TSH1504G (2.1