EN 12390-1 Accredited Testing Labs Worldwide
62 accredited laboratories in 6 countries hold EN 12390-1 in their ISO/IEC 17025 scope. Primary accreditors include United Kingdom Accreditation Service, Deutsche Akkreditierungsstelle, American Association for Laboratory Accreditation. In the register, EN 12390-1 scope entries most often cover Compressive Strength, Particle Size Distribution, Slump in Drinking water, Concrete, Ambient air.
Available in 6 Countries
Top matrices for EN 12390-1
Top analytes for EN 12390-1
- Compressive Strength (22)
- Particle Size Distribution (9)
- Slump (6)
- Water Content (4)
- Density (4)
- Air Voids Content (2)
- Chloride Content (2)
- Compaction (1)
Sample labs
EN 12390-1:2021 BS EN 12390-2:2019 BS EN 12390-3:2019 Laboratory Density BS EN 12390-7:2019 + AC 2020 Laboratory
EN 12390-1:2021 A Density BS EN 12390-7:2019 A SOILS for civil engineering purposes Moisture content (oven drying method) BS 1377-2:1990 A Water content (oven drying method) BS 1377-2:2022 A L
EN 12390-1:2021 229 Construction Products - .02 Compressive Strength Masonry units EN 772-1:2011+A1:2015 229 Construction Products - .52 Strength Hydraulically bound mixtures Compressive strength 20-2000kN EN 13286-41:2003 229 Constr
EN 12390-1, NEN-EN 12390-3, NEN-EN 12390-4 and NEN-EN 12390-7 SIT 10 Hardened concrete and hardened mortar Determination of the compression strength and the volumetric mass of drill cores of concrete from constructions; force meas
EN 12390-1:2021 B, C Curing BS EN 12390-2:2019 A, B, C Compressive strength of cubes BS EN 12390-3:2019 B, C Density BS EN 12390-7:2019 B, C
EN 12390-1:2021 A Density BS EN 12390-7:2019 A Cored specimens - examining and testing in compression BS EN 12504-1:2019 A Sampling of concrete by dust drilling Documented In-House Method No. 112, October 2002 X
EN 12390-1:2021 BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 + AC 2020 Laboratory
Parameter/Equipment Range CMC2 (±) Comments Location9 Liquid Limit Device & Groover Cup with Hanger (Mass) Height of Drop Cup Radius Dimensions Rate (If Motorized) Angle Up to 21
EN 12390-1:2021 Laboratory Density BS EN 12390-7:2019 Laboratory Cored specimens - examining and testing in compression BS EN 12504-1:2019 Laboratory ROCK Point load strength ISRM commission on testing methods.
EN 12390-1:2021 Laboratory BS EN 12390-2:2019 BS EN 12390-3:2019 Density of hardened concrete BS EN 12390-7:2019 Laboratory Cored specimens - examining and testing in compression BS EN 12504-1:2019 Laboratory
EN 12390-1:2021 BS EN 12390-2:2019 A Density BS EN 12390-7:2019 A SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:1990 A Water content BS 1377-2:2022 A Saturation
DIN EN 12350 -1 2019-09 Prüfverfahren Frischbeton - Teil 1: Probenahme und Prüfgeräte B DIN EN 12350 -2 2019-09 Prüfverfahren Frischbeton - Teil 2: Setzmaß B DIN EN 12350 -4 2019-09 Prüfverfahren Frischbeton - Teil 4:
EN 12390-1: 2021 Laboratory Curing BS EN 12390-2: 2019 Laboratory Density BS EN 12390-7: 2019 Laboratory Cored specimens – taking, examining and testing in compression BS EN 12504-1: 2019 Laboratory Flexural
EN 12390-1:2012 BS EN 12390-2: 2009 (Withdrawn) BS EN 12390-2:2019 BS EN 12390-3: 2009 (Withdrawn) BS EN 12390-3:2019 A Compressive strength of cores BS EN 12504-1: 2009 (Withdrawn) BS EN 12504-1:2019 + AC:2020 A
EN 12390-1 Testing hardened concrete - Shape, dimensions and other requirements for specimens and molds Concrete (continued): BS EN 12390-21 Testing hardened concrete - Making and curing specimens for strength tests BS EN 12390-3 Testi
EN 12390-1:2021 A Compressive strength of cubes - including curing BS EN 12390-3:2019 BS EN 12390-2:2019 A Density BS EN 12390-7:2019 A
EN 12390-1:2021 Lenham SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:1990 Lenham Water content BS 1377-2:2022 Lenham Particle size distribution - wet sieving BS 1377-2:19
EN 12390-1:2012 Lab Density BS EN 12390-7:2009 Lab SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:1990 Lab Liquid limit - cone penetrometer BS 1377-2:1990 Lab Liquid
EN 12390-1:2021 A Density BS EN 12390-7:2019 A END
EN 12390-1:2021 A, C, E, H, X Flexural strengths of prisms Including curing BS EN 12390-5:2019 BS EN 12390-2:2019 BS EN 12390-1:2021 H Density BS EN 12390-7:2019+AC:2020 A, C, E, H, X Taking cores BS EN 1250
EN 12390-1:2021 BS EN 12390-2:2019 BS EN 12390-3:2019 Density of hardened concrete BS EN 12390-7:2019 AC2020 END
This document is a translation. The definitive version is the original German annex to the accreditation certificate. DIN EN 12350 -8 2019-09 Testing fresh concrete - Part 8: Self -compacting concrete - Slump - flow test DIN EN 1
EN 12390-1:2021 BS EN 12390-2:2019 BS EN 12390-3:2019 Brigstock Density BS EN 12390-7:2019 incorporating corrigendum November 2020 Brigstock CONCRETE - fresh Sampling composite and spot samples of fresh concrete
EN 12390-1:2021 BS EN 12390-2:2019 B Density BS EN 12390-7:2019 B AGGREGATES Sampling stockpiles of fine and coarse aggregates by hand BS EN 932-1:1997 C Sample reduction by riffle box BS EN 932-2:1999 B
EN 12390-1:2021 Bellshill Barnsley Daventry Making and curing cubic specimens BS EN 12390-2:2019 Bellshill Barnsley Daventry Compressive strength of cubic specimens BS EN 12390-3:2019 Bellshill Barnsley Daventry
EN 12390-1:2021 212 Concrete - 212.11 Compressive Strength Tests (Cubes and Cylinders) Concrete cubes and cores BS 1881-116:1983 EN 12390-3:2019 EN 12390-1:2021 EN 12504- 1:2019&AC:2020 212 Concrete - 212.12 Tensile Spli
EN 12390-1:2021 Woking Birmingham Curing BS EN 12390-2:2019 Woking Birmingham Compressive strength of cubes BS EN 12390-3:2019 Woking Birmingham Compressive strength of cores BS EN 12504-1:2019 Woking Birm
EN 12390-1:2021 BS EN 12390-2:2019 Daventry Density BS EN 12390-7:2019 + AC 2020 Daventry END
EN 12390-1:2021 BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 Laboratory Cored specimens - examining and testing in compression BS EN 12504-1:2019 Laboratory SOILS for civil engineering purposes
EN 12390-1:2021 A Curing cube specimens for strength tests BS EN 12390-2:2019 A Compressive strength of cubes BS EN 12390-3:2019 A Density BS EN 12390-7:2019 incorporating corr
EN 12390-1:2021 A Compressive strength of cubes – including curing BS EN 12390-3:2019 BS EN 12390-2:2019 A Density BS EN 12390-7:2019 incorporating corrigendum November 2020 A PILED FOUNDATIONS Pile integrity
EN 12390-1:2021 A Density BS EN 12390-7:2019 Incorporating corrigendum November 2020 A Compressive strength of cores BS EN 12504-1:2019 Incorporating corrigendum November 2020 A END
EN 12390-1:2021 A Density BS EN 12390-7:2019 A CONCRETE - Fresh Sampling of fresh concrete on site BS EN 12350-1:2019 B - composite sample - spot sample Slump test BS EN 12350-2:2019 B Making and curi
EN 12390-1:2021 BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 Laboratory Cored specimens – examining and testing in compression BS EN 12504-1 :2019 Laboratory SOILS for civil engineering purposes
EN 12390-1:2021 Lab
EN 12390-1:2021 Laboratory Curing BS EN 12390-2:2019 Laboratory Compressive strength of cubes BS EN 12390-3:2019 Laboratory Density BS EN 12390-7:2019 Laboratory Flexural strength of test specimens BS EN 12390-
EN 12390-1:2021 BS EN 12390-2:2019 Cleadon Lane Physical Tests Density BS EN 12390-7:2019 + AC 2020 Cleadon Lane MORTARS, SCREEDS and PLASTERS Mechanical Tests Compressive strength - including curing BS 45
EN 12390-1:2021 A Flexural Strength BS EN 12390-5:2019 A
EN 12390-1: 2021 Lab Compressive strength of resin concrete cubes - including Curing and Density BS 6319-2: 1983 Lab Cored Specimens - examining and testing in compression BS EN 12504-1: 2019 Lab Density BS EN 1
EN 12390-1 sting hardened concrete - Shape, dimensions BS EN 12390-2 Making and curing specimens for strength tests BS EN 12390-3 Compressive strength of test specimens BS EN 12390-7 Density of hardened concrete Soil: ASTM D1140 Deter
EN 12390-1:2021 A BS EN 12390-2:2019 A BS EN 12390-3:2019 A Density BS EN 12390-7:2019 A END
3 Tondachziegel DIN EN 538 1994-11 Tondachziegel für überlappende Verlegung - Prüfung der Biegetragfähigkeit DIN EN 539 -1 2005-12 Tondachziegel für überlappende Verlegung - Teil 1: Bestimmung der physikalischen Eigenschaften
EN 12390-1:2021 A Density BS EN 12390-7:2019 A SOILS for civil engineering purposes Moisture content - oven drying method BS 1377--2:1990 B Liquid limit - cone penetrometer - definitive method BS 1377--2:1990 B
EN 12390-1:2021 Laboratory Compressive strength of cubes, including curing BS EN 12390-3:2019 BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 + AC 2020 Laboratory END
EN 12390-1:2021 Laboratory Curing BS EN 12390-2:2019 Laboratory Density BS EN 12390-7:2019 Laboratory SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2:2022 Laboratory
EN 12390-1:2021 A C Flexi Density BS EN 12390-7: 2019 A C Flexi Cored specimens – taking, examining and testing in compression. BS EN 12504-1:2019 A X
DIN EN 12350 -2 2019-09 Prüfung von Frischbeton - Teil 2: Setzmaß DIN EN 12350 -4 2019-09 Prüfung von Frischbeton - Teil 4: Verdichtungsmaß DIN EN 12350 -5 2019-09 Prüfung von Frischbeton - Teil 5: Ausbreitmaß DIN EN 12350
EN 12390-1:2021 A, B Making cubic specimens for strength tests BS EN 12390-2:2019 A, B Curing cubic specimens for strength tests BS EN 12390-2:2019 A, B Compressive strength of cubes - including curing BS
EN 12390-1:2021 A Density BS EN 12390-7:2019+AC:2020 A ROCK Uniaxial compressive strength ASTM D7012-23 A Elastic modulus ASTM D7012-23 A End preparation of rock specimens for compressive strength ASTM D4543-19
EN 12390-11:2015 A Determination of the chloride migration coefficient BS EN 12390-18:2021 A Chloride Analysis of Cast Concrete Cylinders/Cores NT Build 443, 1995-11 A Accelerated Carbonation DIHM based on of fib M
Showing labs 1–50 of 62. Use pagination below to see more.