FindTestingLabs
Registers refreshed 2026-11-06.See refresh dates

ISO 14126 Accredited Testing Labs Worldwide

ISO 14126, all parts: Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction. Each lab card shows which parts it holds.

Parts of this series

10 accredited laboratories in 4 countries hold ISO 14126 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation, Deutsche Akkreditierungsstelle. In the register, ISO 14126 scope entries most often cover Propriétés En Traction in Plastics, Materials, Metal.

Total labs
10
Countries
4
Top matrix
Plastics
3 labs

Available in 4 Countries

Germany
5 labs
United States
3 labs
France
1 lab
United Kingdom
1 lab

Top matrices for ISO 14126

Plastics
3 labs
Materials
1 lab
Metal
1 lab

Top analytes for ISO 14126

  • Propriétés En Traction (1)

Sample labs

Composite Test & Evaluation
Honiton, GB
Holds: Part not stated on the certificate

ISO 14126:2023 Flexural (Forces from 0.1 kN to 250kN) BS EN ISO 14125:1998+A1 2011 (Method A) In-plane shear (Forces from 0.1kN to 250 kN) BS EN ISO 14129:1998 Interlaminar shear (Forces from 0.1 kN to 10 kN) BS EN

RESCOLL - PESSAC
PESSAC, FR
Holds: Part not stated on the certificate

ISO 14126 Composites plastiques renforcés de fibres Résistance en cisaillement plan Module et déformation en cisaillement Détermination de la réponse contrainte-déformation en cisaillement plan, module et résistance compris, par essai

Deutsches Zentrum für Luft- und Raumfahrt e.V. Institut für Systemleichtbau Statisches
Braunschweig, DE
Holds: Part not stated on the certificate

ISO 14126 2000-12 + Berichtigung 1 2003-06 Faserverstärkte Kunststoffe – Bestimmung der Druckeigenschaften in der Laminatebene DIN EN ISO 14130 1998-02 Bestimmung der scheinbaren interlaminaren Scherfestigkeit nach dem Dreipun

Highland Point,
Butte, MT, US
Holds: Part not stated on the certificate

ISO 14126

Element Los Angeles
Duarte, CA, US
Holds: Part not stated on the certificate

ISO 14126 Fibre-Reinforced Plastic Composites - Determination of Compressive Properties in the In-Plane Direction ISO 14129 Fibre-Reinforced Plastic Composites - Determination of the In-Plane Shear Strain Response, including the In-

Deutsches Referenzburo fur Ringversuche und Referenzmaterialien GmbH (DRRR GmbH)
Kempten, DE
Holds: Part not stated on the certificate

ISO 14126 (composites) Compression set foams ISO 1856 Impact test (notched / un notched): - ISO 179 (Charpy) - DIN 53435 (Dynstat) - ISO 180 (Izod) - ASTM D256 (Izod) DMA ISO 6721-5 Instrumented puncture impact test - ISO 6603-2

Sächsisches Textilforschungsinstitut e. V. Prüfstelle
Chemnitz, DE
Holds: Part not stated on the certificate

ISO 14126 DIN EN ISO 14129 DIN EN ISO 14130 ISO 16049-1 2020 Gültig ab: 14.11.2024 Ausstellungsdatum: 13.06.2025 Luftfrachtausrüstung - Zurrgurte —Teil 1: Gestaltungskriterien und Prüfmethoden Seite 9 von 11

Westmoreland Mechanical Testing & Research
Youngstown, PA, US
Holds: Part 2

ISO 14126-2 Strain Measurement ASTM D695, D6641/D6641M, D8066; ISO 604, 14126 Plain, Open Hole and Filled Hole ASTM D6484/D6484M Edgewise / Flatwise Sandwich ASTM C364/C364M, C365/C365M Shear Loading ASTM D3410/D3410M Compression Se

IMA Materialforschung und Anwendungstechnik
Dresden, DE
Holds: Part not stated on the certificate

ISO 14126 2000 -12 Fibre -reinforced plastic composites – Determination of compressive properties in the in -plane direction DIN EN ISO 14129 1998 -02 Fibre -reinforced plastic composites – Determination of the in -plane shear s

Grasse Zur Ingenieurgesellschaft mbH
Berlin, DE
Holds: Part not stated on the certificate

ISO 14126 2000 -12 Faserverstärkte Kunststoffe – Bestimmung der Druckeigenschaften in der Laminatebene DIN EN ISO 14129 1998 -02 Faserverstärkte Kunststoffe – Zugversuch an 45° -Laminaten zur Bestimmung der Schubspannungs -/S