ISO 15614-1 Accredited Testing Labs Worldwide

30 accredited laboratories in 6 countries hold ISO 15614-1 in their ISO/IEC 17025 scope. Primary accreditors include United Kingdom Accreditation Service, American Association for Laboratory Accreditation, Italian Accreditation Body. In the register, ISO 15614-1 scope entries most often cover Hardness, Ferrite Content, Grain Size in Metal, Fasteners, Steel.

Total labs

Countries

Top matrix

Metal

21 labs

Available in 6 Countries

Germany

2 labs

United Arab Emirates

1 lab

Kuwait

1 lab

Top matrices for ISO 15614-1

Top analytes for ISO 15614-1

Hardness (5)
Ferrite Content (2)
Grain Size (2)
Bending Moment (1)
Carbide Microstructure (1)
Ferrite (1)
Ferrite Count (1)
Ferrite Point Count (1)

Sample labs

SGS United Kingdom

Wolverhampton, GB

ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 15614-6 BS EN ISO 15614-8 ASME IX API Spec 5L AWS B4.0M AWS D1.1/D1.1.M BS EN ISO 5817 ASTM E190-92 CON Fracture toughness testing (CTOD) of weldments, single edge notch geometry

IMR Test Labs - Portland

Portland, OR, US

ISO 15614-1, 17639 Microetching ASTM E407 Microstructure ASTM A247, F1854; ASM Metals Handbook Volume 9

ASAMS Limited

Norfolk, GB

ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 15614-6 BS EN ISO 15614-7 BS EN ISO 15614-8 BS EN ISO 9016 BS EN ISO 5178 BS EN ISO 4136 BS EN ISO 5173 BS EN ISO 9015-1 BS EN ISO 9017 BS EN ISO 17639 BS 4515:Part 1 BS 4515:Part 2 BS 4

Quality Sider Verification

Marcianise, IT

ISO 15614-1:2019 par 7.4.2 + ISO 5173:2023, UNI EN ISO 5173:2023 AWS D1.1/D1.1M:2020 par 6d - solo/only Part D, par 6.26-6,27-6,28-6,29 _ _ _ _ Pendolo di Charpy CSA W47.1-19 Annex E _ ASME IX QW 170:2023 ASME IX QW 170:2023 EN I

Element Broken Arrow

Broken Arrow, OK, US

ISO 15614-1, 5173; SOP A203 Hardness Portable Hardness (HRC) ASTM A1038, E110; SOP A206 Brinell (3000 kgf) ASTM A370 (Section 17), F606/F606M, E10 Rockwell Hardness (HRA, HRBW, HRC, HREW, HRFW, HRHW) ASTM E18, A370 (Sec

United Technical

Whitmore Lake, MI, US

ISO 15614-1 Weld Testing Bend Test ASME BPVC Section IX (sec. QW-160); AWS D1.1/D1.1M (sec. 6.10.3.1 & 6.10.3.2), AWS D1.2/D1.2M (sec. 3.8); B4.0 (sec. 6); ISO 15614-1 Break (Fillet Weld) AWS D1.1/D1.1M (sec. 6.13), B4.0 (sec. 9);

Element Cleveland

Cleveland, OH, US

ISO 15614-1, 15614-2 Failure Analysis Using the methods listed above and on scopes of accreditation 0100.02 and 0100.10 in accordance with ASM Handbook Volume II. SEM/EDS ASTM E1508; SOP 60.361 Density – Physical Property ASTM

Element Materials Technology Sheffield Ltd, Trading as Element Materials Technology Sheffield – Magna Way

South Yorkshire, GB

ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 15614-8 BS EN ISO 4136 BS EN ISO 5173 BS EN ISO 5178 BS EN ISO 9015-1 BS EN ISO 9015-2 BS EN ISO 9016 BS EN ISO 9017 BS EN 17639 BS 2633 PD 5500 ASME IX Case depth Decarburised de

Ultramag Inspection Services

Southampton, GB

ISO 15614-1:2017+A1: 2019 BS EN ISO 9606-1:2017 BS EN ISO 9606-2: 2004 ASME BPVC.IX- 2023 END

Element Materials Technology ME Limited Abu Dhabi

Abu Dhabi, AE

ISO 15614-1 BS EN ISO 15614-2, BS EN 287-1,

Spree NDT Co

Kent, GB

ISO 15614-1 :2017+A1 2019 BS EN ISO 9017 :2018 BS EN ISO 17639 :2022 BS 4515-1 :2009 BS 4515-2 :1999 BS 4872:Part 1:1982 ASME IX: 2021 A END

WTTI

Allentown, PA, US

ISO 15614-1, 15614-2, 15614-6, 15614-7, 9606-1, 9606-2, 9606-4; MIL-STD-248D (Canceled 8/1997), 1595A (Canceled 6/1998), 2219 (Canceled 9/2009), 1261 (Canceled 7/2003); NACE MR0175/ISO15156-1, 15156-2, 15156-3; NAVSEA S9074-AQ-GIB-010 N

WPW Werkstoff-Prüfung Wieczorek

Haltern am See, DE

ISO 15614-1 2020-05 DIN EN ISO 15614-2 2005-07 DIN EN ISO 9015-1 2011-05 DIN EN ISO 9017 2018-04 Anforderung und Qualifizierung von Schweißverfahren für metal- lische Werkstoffe - Schweißverfahrensprüfung - Teil 1: Lichtbogen- und Gasschwei

Heavy Engineering Industries & Shipbuilding Co. K.S.C (Public) (HEISCO) Testing &

Shuaiba, KW

ISO 15614-1; API 1104 Brinell Hardness Tes t (10/3000 kgf; 2.5/187.5 kgf) ASTM A370; ASTM E10; ISO 6506-1 Vickers Hardness Test (10 kgf) ASTM E92; ISO 6507-1 Rockwell Hardness Test – HRBW, HRC Nick Break Test Fillet

CDL Group

Powys, GB

ISO 15614-1 :2017+A1 :2019 BS EN ISO 15614-2 :2005 ASME IX: 2025 END

IRTEC SRL ISTITUTO RICERCHE TECNOLOGICHE E COLLAUDI

Trezzo sull'Adda, IT

IRTEC SRL ISTITUTO RICERCHE TECNOLOGICHE E COLLAUDI UNI CEI EN ISO/IEC 17025:2018 Allegato al certificato di accreditamento n. 02151 rev. 1 del 23/01/2025 Via Fernando Santi 3 20056 Trezzo sull’Adda MI Prove di resilienza/Impact test R

APAVE UK

Derby, GB

ISO 15614-1:2017+ A1:2019 BS EN ISO 15614-2:2005 BS EN ISO 15614-8:2016 BS EN ISO 15614-7:2019 ASME BPVS IX: 2025 AWS D1.1/D1.1M:2025 BS EN ISO 17637:2016 BS EN ISO 9018:2015 BS EN ISO 9013:2017+A1:2024 BS EN 287-1:2011 (Withdrawn

Induction Pipe Bending UK Limited trading as IPB Mechanical Testing

Tyne & Wear, GB

ISO 15614-1: 2017 + A1: 2019 BS EN ISO 15614-2: 2005 AWS D1.1.1M: 2025 ASME IX: 2025 END

Materials Engineering & Testing

Worcester, GB

ISO 15614-1:17+A1: 2019 BS EN ISO 17660-1:2006 BS EN ISO 17660-2:2006 BS 8548: 2017 Fracture Toughness K1c (Ambient Temperature) ASTM E399-24

Parco Scientifico e Tecnologico d'Abruzzo

Chieti, IT

ISO 15614-1:2019 par 7.4.3 + ISO 17639:2022, UNI EN ISO 17639:2022 Esame visivo AWS D1.1/D1.1M:2025 par 6.10.4 Esame visivo ASME BPVC IX QW 183:2025, ASME BPVC IX QW 184:2025, ASME IX QW 183:2023, ASME IX QW 184:2023 EN ISO 17639:2022,

Element Materials Technology Aberdeen

Aberdeen, GB

ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 9606-1 BS EN ISO 9606-2 BS EN ISO 4136 BS EN ISO 9016 BS EN ISO 5173 BS EN ISO 5178 BS EN ISO 9015-1 BS EN ISO 9017 BS EN ISO 17639 BS 4515-1 BS 4515-2 API 1104 API 6A AWS D1.1/D1.1M A

White Lab s.r.l. - C.T.R.

Limena, IT

ISO 15614-1:2019 par 7.4.2 + ISO 5173:2023 _ UNI EN ISO 15614-1:2019 par 7.4.4 + ISO 9016:2022 + ISO 148-1:2016 UNI EN ISO 15614-1:2019 par 7.4.1 + ISO 4136:2022 + UNI EN ISO 6892-1:2020 Pendolo di Charpy Trazione Denominazione della

Metaltest UK (a division of LTI Metaltech Limited)

Abingdon, GB

ISO 15614-1:2017+A1:2019 BS EN ISO 15614-1:2004+A2:2012 (Withdrawn) BS EN 13445-4 2021+A1:2023 BS EN 13445-5 2021 BS EN ISO 15614-2:2005 END

GWP Gesellschaft für Werkstoffprüfung mbH

Zorneding-Pöring, DE

3 Metallographische Untersuchungen [Flex B] Prüfart Messgröße / Prüfparameter Prüfgegenstand Charakteristische Prüfverfahren Standort Metallographie Bestimmung der erkennbaren Korngröße Stahl DIN EN ISO 643 ED, ZO Graphitklassifi

MSMK Training

Sheffield, GB

ISO 15614-1:2017+A1:2019 BS EN ISO 15614-2:2005 BS EN ISO 9606-1:2017 BS EN ISO 9606-2:2004 BS 4515-1:2009 BS 4515-2:1999 END

Element Materials Technology Aerospace UK Limited, Trading as Element Materials Technology

Lancaster, GB

ISO 15614-1 BS EN ISO 15614-2 BS EN ISO 4136 BS EN ISO 5173 BS EN ISO 5178 BS EN ISO 9015-1 BS EN ISO 9016 BS EN ISO 9017 BS EN ISO 17639 PD 5500 ASME BPVC IX AWS D1.1/D1.1M ASME B31.3 API 1104 API 5L API 6A DNV-OS-F101 MI

WQ Inspection & Certification

West Midlands, GB

ISO 15614-1 :2017+A1 :2019 BS EN ISO 15614-2 :2005 BS EN ISO 15614-5 :2004 BS EN ISO 15614-6 :2006 BS EN ISO 15614-7 :2019 BS EN ISO 15614-8 :2016 BS EN ISO 15614-12 :2021 BS EN ISO 15614-13 :2023 ASME BPVC IX-2025 AWS D1.1 2020

Inidam Limited

Hampshire, GB

ISO 15614-1:2017+A1:2019 BS EN ISO 15614-2: 2005 ASME IX: 2021 METALS, ALLOYS and METAL PRODUCTS Mechanical Tests Rockwell (A, B (W) and C Scales) BS EN ISO 6508-1: 2023 ASTM E18-24 END

Goolsby Testing

Humble, TX, US

Test Method: Tension Test (Metallic Materials) Test(s): API 6A, 5L X60,1104; ASTM A370 Section(s) 7-14, B557/B557M, E8/E8M; API 934-A, 943-E; ASME BPVC Section VIII Div. 1 Section(s) UW- 11, UW-51, UW-52, UCS-57, ASME BPVC Sect

SIGMATRE LAB S.R.L.

Garbagnate Monastero, IT

SIGMATRE LAB S.R.L. Via Fornace 31 23846 Garbagnate Monastero LC Prove di resilienza/Impact test (0÷750J) Prove di trazione trasversale sulle saldature/Transverse tensile test on welds (0-1200kN) Leghe di ferro/Iron alloys Denominazio