Materials Testing Labs in France
10 laboratories in France are accredited by COFRAC under ISO/IEC 17025 to perform Materials testing. Common methods used to test Materials in France: iso-527-1, iso-6892-1. Most frequently tested analytes in this matrix in France: Asbestos, Ash Content, C. Accredited providers include BUREAU VERITAS LABORATOIRES CERGY, RESCOLL - PESSAC, LABORATOIRES POURQUERY, EFFITECH - ISSOUDUN, INSTITUT DE SOUDURE INDUSTRIE - LABORATOIRE DE VILLEPINTE. Sites located in CERGY, PESSAC, LYON 7EME, ISSOUDUN, VILLEPINTE.
Accredited Labs
LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 8/13 Portée FIXE : Le laboratoire est reconnu compétent pour pratiquer les méthodes décrites en respectant strictement les méthodes mentionnées dans la portée d’accréditation
4/19 Portée flexible FLEX1 : le laboratoire est reconnu compétent pour pratiquer les méthodes référencées et leurs révisions ultérieures. MATERIAUX / MATERIAUX PLASTIQUES ET COMPOSITES A MATRICE ORGANIQUE / Essais mécaniques (93-1)
LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 6/37 Unité technique 3 : CHIMIE Portée FIXE : Le laboratoire est reconnu compétent pour pratiquer les méthodes décrites en respectant strictement les méthodes mentionnées
LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 4/7 Portée flexible FLEX1 : Le laboratoire est reconnu compétent pour pratiquer les méthodes référencées et leurs révisions ultérieures. *Portée FIXE : Le laboratoire est r
LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 6/7 Portée générale : MATERIAUX / MATERIAUX METALLIQUES SOUDES-BRASES / Essais métallographiques (29-5) Référence portée générale Objet Nature d'essai ou d'analyse Caract
LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 3/16 Section Laboratoires ANNEXE TECHNIQUE TECHNICAL APPENDIX à l’attestation N° 1-5606 rév. 13 to accreditation N° 1-5606 rev. 13 L’accréditation concerne les pr
LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 9/68 Portée flexible FLEX2 : Le laboratoire est reconnu compétent pour adopter toute méthode reconnue dans le domaine couvert par la portée générale. La liste détaillée des p
LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 6/7 MATERIAUX / MATERIAUX METALLIQUES SOUDES / BRASES / Essais mécaniques (29-5) Objet Nature d'essai ou d'analyse Caractéristique mesurée ou recherchée Référence de la méth
LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 5/6 MATERIAUX / MATERIAUX PLASTIQUES ET COMPOSITES A MATRICE ORGANIQUE / Essais mécaniques Nature d'essai Objet Caractéristique mesurée ou recherchée Référence de la métho
Accréditation n° 1-6680 LAB FORM 37 – Révision 10 – applicable au 1er juillet 2025 Page 3/8 Section Laboratoires ANNEXE TECHNIQUE TECHNICAL APPENDIX à l’attestation N° 1-6680 rév. 4 to accreditation N° 1-6680 rev. 4 L’accréd
Top methods used to test Materials in France
Top analytes for Materials in France
- Asbestos (2)
- Ash Content (1)
- C (1)
- Propriétés En Traction (1)
- Rp1% (1)
About ISO/IEC 17025 in France
Comité français d'accréditation (COFRAC) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in France.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.
Related searches
- Germany (9)
- United States (6)
- Poland (5)
- Italy (3)
- CA (2)
- MX (1)