13 laboratories in Italy are accredited by ACCREDIA under ISO/IEC 17025 to perform ISO 13934 testing. From the accredited scope text: “ISO 13934-1:2013, UNI EN ISO 15384:2022 par 7.1 + UNI EN ISO 13934-1:2013, UNI EN ISO 15797:2018, UNI EN ISO 6330:2022 UNI EN ISO 15384:2022 par 7.2 + UNI EN ISO 4674-1:2017, UNI EN ISO 15797:2018, UN” “ISO 13934-1:2013, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 20471:2017 par 5.5.3 + UNI EN ISO 4674-1:2017 Dinamometria UNI EN ISO 20471:2017 par 7.4.1 + UNI EN ISO 12947-2:2017 + CIE 54.2 2001 Mart” “ISO 13934-1:2013, UNI EN ISO 15797:2018, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 14116:2015 par 6.2.2.1 + UNI EN ISO 13937-2:2002, UNI EN ISO 15797:2018, UNI EN ISO 3175-2” “ISO 13934-2:2014 Forza massima e allungamento alla forza massima- metodo della striscia/Maximum force and elongation at maximum force - strip method (0 - 5000 N) UNI EN ISO 13934-1:2013 Identificazion”
Vigevano, IT
ISO 13934-1:2013, ISO 13934-1:2013, UNI EN ISO 13934-1:2013 Dinamometria pH dell'estratto acquoso/pH of aqueous extract (1 ÷ 14 pH) EN ISO 3071:2020, ISO 3071:2020, UNI EN ISO 3071:2020 Potenziometria Protettori del piede e della gamb
Como, IT
ISO 13934-1:2013, UNI EN ISO 15384:2022 par 7.1 + UNI EN ISO 13934-1:2013, UNI EN ISO 15797:2018, UNI EN ISO 6330:2022 UNI EN ISO 15384:2022 par 7.2 + UNI EN ISO 4674-1:2017, UNI EN ISO 15797:2018, UNI EN ISO 6330:2022 - solo/only Met B M
Carpi, IT
ISO 13934-1:2013, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 20471:2017 par 5.5.3 + UNI EN ISO 4674-1:2017 Dinamometria UNI EN ISO 20471:2017 par 7.4.1 + UNI EN ISO 12947-2:2017 + CIE 54.2 2001 Martindale Solidità del colore al lava
Lurate Caccivio, IT
ISO 13934-1:2013 Dinamometria Lacerazione - Metodo di provette a pantalone - lacerazione semplice/Tear force of trousers-shaped test specimens - single tear method UNI EN ISO 15384:2022 par 7.2 + UNI EN ISO 13937-2:2002 Variazione dime
Prato, IT
ISO 13934-2:2014, DIN EN ISO 13934-2:2014, ISO 13934-2:2014, UNI EN ISO 13934-2:2014 Forza massima di rottura delle cuciture - metodo della striscia/Maximum force to seam rupture - strip method (0,03N-2250N 0,5-10,0mm) ISO 13935-1:2014,
Prato, IT
ISO 13934-2:2014 Forza massima e allungamento alla forza massima- metodo della striscia/Maximum force and elongation at maximum force - strip method (0 - 5000 N) UNI EN ISO 13934-1:2013 Identificazione fibre/Identification of fibres (Q
Busto Arsizio, IT
ISO 13934-1:2013, UNI EN ISO 15797:2018, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 14116:2015 par 6.2.2.1 + UNI EN ISO 13937-2:2002, UNI EN ISO 15797:2018, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 _ Resist
Cabiate, IT
ISO 13934-2:2014 ISO 13935-2:2014 _ GC-MS GC-MS Dinamometria Dinamometria Dinamometria GB/T 13773.2:2008 Dinamometria ISO 13934-1:2013 Dinamometria GB/T 3923.1:2013 _ 16 CFR 1610 ed 2008 Amd 2023 + AATCC LP1-2021 - solo/only P
Lurate Caccivio, IT
ISO 13934-2:2014 Forza massima di rottura delle cuciture - metodo Grab /Maximum force to seam rupture - the grab method UNI EN ISO 13935-2:2014 Dinamometria Dinamometria Dinamometria Forza massima e allungamento alla forza massima- me
Biella, IT
ISO 13934-1:2013, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 13937-4:2002, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 13937-2:2002, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 Dinamo
Lastra a Signa, IT
ISO 13934-2:2014 BS EN ISO 13934-1:2013 Dinamometria Dinamometria UNI EN ISO 13937-2:2002 Dinamometria ASTM D2261-13(2024) _ Lacerazione/Tear force ISO 13937-1:2000 Metanale (Formaldeide)/Methanal (Formaldehyde) (0,05 - 12 ppm (m
Montemurlo, IT
ISO 13934-1:2013, DIN EN ISO 13934-1:2013, ISO 13934-1:2013, NF EN ISO 13934-1:2013, UNI EN ISO 13934-1:2013 Infiammabilità/Flammability (Campione orientato a 45°) Lacerazione/Tear force (1-64N) GB/T 14644:2014 GB/T 3917.1:2009 Massa
Ponte a Egola - San Miniato, IT
ISO 13934-2:2014, UNI EN ISO 13934-2:2014 Dinamometria Forza massima di rottura delle cuciture - metodo della striscia/Maximum force to seam rupture - strip method ISO 13935-1:2014, UNI EN ISO 13935-1:2014 Forza massima di rottura delle
This page is a fixed slice of the register: every ISO 13934 scope we hold for Italy. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in ItalyItalian Accreditation Body (ACCREDIA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in Italy.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.