10 laboratories in Italy are accredited by ACCREDIA under ISO/IEC 17025 to perform ISO 13935 testing. From the accredited scope text: “ISO 13935-2:2014, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 13934-1:2013, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 13937-4:2002, UNI EN ISO 3175-” “ISO 13935-1:2014, UNI EN ISO 15797:2018, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 _ UNI EN ISO 14460:2003 par 6.2 + UNI EN ISO 9151:2017, UNI EN ISO 15797:2018, UNI EN ISO 3175-2:2018, UNI EN ISO” “ISO 13935-2:2014 UNI EN 14126:2004 par. 4.1.2 + UNI EN 14325:2024 par 4.9 + UNI EN ISO 13934-1:2013 UNI EN 14126:2004 par. 4.1.2 + UNI EN 14325:2005 par 4.7 + UNI EN ISO 9073-4:1999, UNI EN 14126:2004” “ISO 13935-2:2014 Dinamometria Forza massima e allungamento alla forza massima- metodo della striscia/Maximum force and elongation at maximum force - strip method UNI EN ISO 15384:2022 par 7.1 + UNI EN”
Como, IT
Centro Tessile Serico Sostenibile Srl UNI CEI EN ISO/IEC 17025:2018 Allegato al certificato di accreditamento n. 00041 rev. 8 del 23/01/2025 Via Castelnuovo 3 22100 Como CO Revisione: 53 Sede A Data: 03/12/2025 pag. 6 di 24 Res
Carpi, IT
ISO 13935-2:2014, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 11611:2015 par 6.2 + UNI EN ISO 13934-1:2013, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 11611:2015 par 6.3 + UNI EN ISO 13937-2:2002, UNI EN ISO 6330:2022 _ Propagazion
Lurate Caccivio, IT
ISO 13935-2:2014 Dinamometria Forza massima e allungamento alla forza massima- metodo della striscia/Maximum force and elongation at maximum force - strip method UNI EN ISO 15384:2022 par 7.1 + UNI EN ISO 13934-1:2013 Dinamometria Lace
Prato, IT
ISO 13935-1:2014, UNI EN ISO 13935-1:2014 Forza massima di rottura delle cuciture - metodo Grab /Maximum force to seam rupture - the grab method (0,03N-2250N 0,5-10,0mm) ISO 13935-2:2014, UNI EN ISO 13935-2:2014 Dinamometria Dinamometr
Busto Arsizio, IT
ISO 13935-1:2014, UNI EN ISO 15797:2018, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 _ UNI EN ISO 14460:2003 par 6.2 + UNI EN ISO 9151:2017, UNI EN ISO 15797:2018, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 _ Denominazione della prov
Cabiate, IT
ISO 13935-2:2014 _ GC-MS GC-MS Dinamometria Dinamometria Dinamometria GB/T 13773.2:2008 Dinamometria ISO 13934-1:2013 Dinamometria GB/T 3923.1:2013 _ 16 CFR 1610 ed 2008 Amd 2023 + AATCC LP1-2021 - solo/only Procedura di lavagg
Lurate Caccivio, IT
ISO 13935-2:2014 Dinamometria Dinamometria Dinamometria Forza massima e allungamento alla forza massima- metodo della striscia/Maximum force and elongation at maximum force - strip method Forza massima e allungamento alla forza massima
Biella, IT
ISO 13935-2:2014, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 13934-1:2013, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 Dinamometria UNI EN ISO 13937-4:2002, UNI EN ISO 3175-2:2018, UNI EN ISO 6330:2022 Dinamo
Bollate, IT
ISO 13935-1:1999 Dinamometria Rotabili ferrotramviari/Railway rolling stock Denominazione della prova / Campi di prova Acido bromidrico/Hydrogen bromide, Acido cianidrico/Hydrogen cyanide, Acido cloridrico/Hydrochloric acid, Diossido di
Ponte a Egola - San Miniato, IT
ISO 13935-1:2014, UNI EN ISO 13935-1:2014 Forza massima di rottura delle cuciture - metodo Grab /Maximum force to seam rupture - the grab method ISO 13935-2:2014, UNI EN ISO 13935-2:2014 Dinamometria Dinamometria Forza massima e allung
This page is a fixed slice of the register: every ISO 13935 scope we hold for Italy. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in ItalyItalian Accreditation Body (ACCREDIA) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in Italy.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.