Registers refreshed 2026-11-08.See refresh dates
Germany

EWIS GmbH

Auestraße 39, 67346, Speyer, Germany

DAKKS D-PL-19997-01-00DAKKS D-PL-19997-01-01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
28
DAKKS certificates
2
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 28 standard numbers and the 25 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO13
ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles
ISO 5579Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
ISO 9934-1Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 10893-8Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
ISO 10893-10Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
ISO 13588Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
ISO 16371-2Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays
ISO 16809Non-destructive testing - Ultrasonic thickness determination
ISO 17636-1Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
ISO 17636-2Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors
ISO 17637Non-destructive testing of welds - Visual testing of fusion-welded joints
ISO 17638Non-destructive testing of welds - Magnetic particle testing
ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
EN8
EN 13
EN 1369Founding - Magnetic particle testing
EN 1371-1Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
EN 10160Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)
EN 10307Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
EN 10308Non-destructive testing - Ultrasonic testing of steel bars
EN 12681-1
EN 13018Non-destructive testing - Visual testing - General principles
EN 10228 series4
EN 10228-1Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-2Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228-3Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 12680 series3
EN 12680-1Founding - Ultrasonic testing - Part 1: Steel castings for general purposes
EN 12680-2
EN 12680-3Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

6 lines
DAKKS

ISO/IEC 17025

Active

D-PL-19997-01-00

View scope

Accredited scope, certificate D-PL-19997-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018; DIN EN ISO 9001; DIN EN ISO/IEC 17011--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

DAKKS

ISO/IEC 17025

Active

D-PL-19997-01-01

View scope

Accredited scope, certificate D-PL-19997-01-01

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018; DIN EN ISO 9001--
2DIN EN ISO 5579; DIN EN ISO 17636 -1; DIN EN ISO 17636 -2; DIN EN 12681 -1; DIN EN ISO 16371 -2; DIN EN ISO 10893 -8Metal-
3DIN EN ISO 10893-10; DIN EN ISO 17640; DIN EN 10160; DIN EN 10228-3; DIN EN 10228-4; DIN EN 10307; DIN EN 10308; DIN EN 12680-1; DIN EN 12680-2; DIN EN 12680-3; ISO 16809; DIN EN ISO 13588steel tubes; steel flat product; steel forgings; austenitic and austenitic-ferritic stainless steel forgings; austenitic and austenitic-ferritic stainless steels flat products; steel bars; Steel castings; Spheroidal graphite cast iron castings; welds6 to mm
4DIN EN ISO 9934 -1; DIN EN ISO 17638; DIN EN 1369; DIN EN 10228 -1; DIN EN ISO 3452 -1; DIN EN 1371 -1; DIN EN 13 71 -2; DIN EN 10228 -2; DIN EN 13018; DIN EN ISO 17637--
5AD 2000 -Merkblatt HP 5/3; ASME BPVC V--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Auestraße 39, Speyer, 67346, DE

49.33272, 8.44687

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.