Greer Steel Company Metallurgical
1 Boat Street, 44622, Dover, OH, United States
Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.
Only the laboratory you pick gets your contact details. We ask the others without them.
Contact this laboratory
Work at Greer Steel Company Metallurgical?
Claim this profile to keep it accurate.
Register record
- A2LARefreshed
- 1421.01Active
Accredited standards
We found no published test standard numbers in this lab’s scope (labs often list in-house methods instead). The full scope as published is below.
Scope as published by A2LA
3 lines
ISO/IEC 17025
Active1421.01
The scope document we hold says it is valid until 2028-05-31.
Accredited scope, certificate 1421.01
This scope has not been split into individual lines yet. Below is the text of the scope document as published.
Part 1 of 3
(A2LA Cert. No. 1421.01) Revised 06/19/2026 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 OHIO STRIP STEEL COMPANY 1 Boat Street Dover, OH 44622 Kyle Coben Phone: (330) 343 - 8811 x5212 MECHANICAL Valid To: May 31, 2028 Certificate Number: 1421.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on plain carbon, alloy, and stainless steels: Test: Test Method(s): I. Mechanical Testing Ductility: Bend (Bend and Flatten) ASTM E290 Hardness: Rockwell Hardness (HRBW, HRC, HR15TW, HR30TW, 15N, 30N) ASTM E18 Tension: Tensile (Room Temp, Up to 60 klbs) (Tensile, Yield, Elongation, r, n) ASTM E8/8M, E517, E646; JIS Z 2201; ISO 6892-1 Surface Finish: Profilometer SAE J911 Metallographic Evaluation: Preparation Grain Size Inclusion Content (Microscopic) Decarburization (Microscopic) Structure ASTM E3 ASTM E112 (Comparison Method) ASTM E45 (Method A) ASTM E1077; SAE J419 ASTM A892 Magnetic Testing: Coercivity Meter Greer Lab Procedure WI-010 (based off ASTM A8481)
Part 2 of 3
(A2LA Cert. No. 1421.01) Revised 06/19/2026 Page 2 of 2 Test: Test Method(s): II. Chemical Testing Optical Emission Spectroscopy (Al, B, C, Ca, Cb, Cr, Cu, Mn, Mo, Ni, P, S, Si, Ti, V) ASTM E415 1The laboratory is accredited for the test methods listed above. The accredited test methods are used in determining compliance with the material specification; however, the inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications. Inclusion of these material specifications on this Scope also does not confer accreditation for every method embedded within the specification. Only the methods listed above on this Scope are accredited.
Part 3 of 3
For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited OHIO STRIP STEEL COMPANY Dover, OH for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 13th day of April 2026. __ _____________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 1421.01 Valid to May 31, 2028 Revised June 19, 2026
Text extracted from the accredited scope document. Layout and tables from the original may not carry over; the scope document itself is the authoritative copy.
Location
Other Locations
1 other site in this organization
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.