Pearl Leather Finishers
PO Box 709, 11-21 Industrial Park, 12095, Johnstown, NY, United States
Visit website- Accredited standards
- 23
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 23 standard numbers and the 6 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM15
ASTM D1388
ASTM D1735
ASTM D1813
ASTM D1814
ASTM D2208
ASTM D2209
ASTM D2211
ASTM D3884
ASTM D4705
ASTM D5053
ASTM D5587
ASTM D6012
ASTM D6182
ASTM D6413
ASTM D7255
ISO6
ISO 3377-1Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear
ISO 3795Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
ISO 11640Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing
ISO 11644Leather - Test for adhesion of finish
ISO 17235Leather - Physical and mechanical tests - Determination of softness
ISO 26082Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather
Other standards2
AATCC 8
FMVSS 302
AATCC 8; ASTM D5053; ASTM D6012; ISO 26082; LP-463KC-04-01; LP-463KC-04-02; LP-463KC-04-03; LP-463-LB-05-01; LP-463PB-31-01; SAE J861; SAE J912; SAE J2412; ASTM D1388; ISO 17235; ASTM D1813; ASTM D1814; LP-463-KB-24-01; WI-7128
ASTM D1735; LP-463LB-12-01; LP-463LB-13-01; LP-463LB-11-02; ASTM D6182; ASTM D3884; ASTM D7255; ISO 11640; LP-463KB-06-01; SAE J365; ASTM D6413; FMVSS 302; ISO 3795; MS-JP-9-4; SAE J369; DOT/FAA/AR (FAR); ASTM D2208; ASTM D2209; ASTM D2211; ASTM D4705; ASTM D5587; ISO 3377-1; ISO 11644; LP-463KB-13-01; SAE J855; WI-7145
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
3 lines
ISO/IEC 17025
Active1967.01
The scope document we hold says it was valid until 2026-09-30. That date has passed, so our copy may be out of date. We downloaded it from the A2LA register on 2026-03-14. Check the A2LA register for the current scope.
Accredited scope, certificate 1967.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ASTM D1735; LP-463LB-12-01; LP-463LB-13-01; LP-463LB-11-02; ASTM D6182; ASTM D3884; ASTM D7255; ISO 11640; LP-463KB-06-01; SAE J365; ASTM D6413; FMVSS 302; ISO 3795; MS-JP-9-4; SAE J369; DOT/FAA/AR (FAR); ASTM D2208; ASTM D2209; ASTM D2211; ASTM D4705; ASTM D5587; ISO 3377-1; ISO 11644; LP-463KB-13-01; SAE J855; WI-7145 | leather | - |
| 2 | AATCC 8; ASTM D5053; ASTM D6012; ISO 26082; LP-463KC-04-01; LP-463KC-04-02; LP-463KC-04-03; LP-463-LB-05-01; LP-463PB-31-01; SAE J861; SAE J912; SAE J2412; ASTM D1388; ISO 17235; ASTM D1813; ASTM D1814; LP-463-KB-24-01; WI-7128 | - | - |
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
PEARL LEATHER FINISHERS, INC.
Johnstown, NY
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 19th day of August 2024.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 1967.01
Valid to September 30, 2026 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- VTEC Laboratories Inc.Bronx, NY · ~244 kmA2LAShares 1 accredited test methodFMVSS 302
- Dayton T. BrownBohemia, NY · ~269 kmA2LAShares 1 accredited test methodFMVSS 302
- Element Materials Technology St. PaulSt. Paul, MN · ~1,510 kmA2LAShares 1 accredited test methodFMVSS 302
- MGA Research CorporationIrving, TX · ~2,270 kmA2LAShares 1 accredited test methodFMVSS 302
- Intertek Testing Services NAElmendorf, TX · ~2,624 kmA2LAShares 1 accredited test methodFMVSS 302
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.