Registers refreshed 2026-11-08.See refresh dates
Germany

Jürgen Reindl ILB

Zum Grenzgraben 3, 76689, Ubstadt-Weiher, Germany

DAKKS D-PL-21461-01-00DAKKS D-PL-21461-01-01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
28
DAKKS certificates
2
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 28 standard numbers and the 24 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO16
ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles
ISO 5817Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections
ISO 9934-1Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 10675-1Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys
ISO 10675-2Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys
ISO 10893-4Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
ISO 10893-6Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
ISO 16810Non-destructive testing - Ultrasonic testing - General principles
ISO 16811Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
ISO 16823Non-destructive testing - Ultrasonic testing - Through-transmission technique
ISO 16826Non-destructive testing - Ultrasonic testing - Testing for discontinuities perpendicular to the surface
ISO 16827Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities
ISO 17636Non-destructive testing of welds - Radiographic testing of fusion-welded joints
ISO 17637Non-destructive testing of welds - Visual testing of fusion-welded joints
ISO 17638Non-destructive testing of welds - Magnetic particle testing
ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
EN8
EN 1268
EN 1369Founding - Magnetic particle testing
EN 10160Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)
EN 10893-5
EN 12680-3Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings
EN 12681-1
EN 13018Non-destructive testing - Visual testing - General principles
EN 14127
EN 10228 series4
EN 10228-1Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-2Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228-3Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

5 lines
DAKKS

ISO/IEC 17025

Active

D-PL-21461-01-00

View scope

Accredited scope, certificate D-PL-21461-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018; DIN EN ISO 9001; DIN EN ISO/IEC 17011--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

DAKKS

ISO/IEC 17025

Active

D-PL-21461-01-01

View scope

Accredited scope, certificate D-PL-21461-01-01

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018; DIN EN ISO 9001metallischen Komponenten-
2DIN EN ISO 17636; DIN EN 12681 -1; DIN EN ISO 10893 -6; DIN EN ISO 10675 -1; DIN EN ISO 10675 -2; DIN EN 1268 0-1; DIN EN 12680 -3; DIN EN 10160; DIN EN 10228 -3Metal-
3DIN EN 10228 -4; DIN EN ISO 16810; DIN EN ISO 16811; DIN EN ISO 16823; DIN EN ISO 16826; DIN EN ISO 16827; DIN EN ISO 17640; DIN EN 14127; DIN EN ISO 9934 -1; DIN EN ISO 17638; DIN EN 1369; DIN EN 10228 -1; DIN EN 10893 -5Schmiedestücken aus Stahl; austenitischem und austenitisch-ferritischem nichtrostendem Stahl; Schweißverbindungen; Stahlrohren; nahtloser und geschweißter ferromagnetischer Stahlrohre-
4DIN EN ISO 3452 -1; DIN EN 10228 -2; DIN EN ISO 10893 -4; DIN EN ISO 17637; DIN EN 13018; DIN EN ISO 5817; DVGW GW 350; AD 2000 -Merkblatt HP 5/3; ASME BPVC Section 5Schmiedestücken aus Stahl; Stahlrohren; Schweißverbindungen; Rohrleitungen aus Stahl-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Zum Grenzgraben 3, Ubstadt-Weiher, 76689, DE

49.16879, 8.62138

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.