PPG Industrial Electrocoat Performance
151 Colfax Street, 15144, Springdale, PA, United States
- Accredited standards
- 35
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 35 standard numbers and the 18 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM18
ASTM B117Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM D522
ASTM D523Standard Test Method for Specular Gloss
ASTM D610
ASTM D714
ASTM D870
ASTM D1308
ASTM D1654
ASTM D1735
ASTM D2247
ASTM D2794
ASTM D2803
Show all 18
ASTM D3170
ASTM D3359
ASTM D3363
ASTM D4752
ASTM D5402
ASTM D7091
ISO11
ISO 2409Paints and varnishes - Cross-cut test
ISO 2812-3Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
ISO 2812-4Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
ISO 3882Metallic and other inorganic coatings - Review of methods of measurement of thickness
ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 6860Paints and varnishes - Bend test (conical mandrel)
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 11997-1Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid
ISO 15184Paints and varnishes - Determination of film hardness by pencil test
ISO 17872Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
ISO 20567-1Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
ISO 4628 series5
ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-8Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
ISO 4628-10Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion
Other standards1
VDA 621
ASTM D1308; ASTM D523; ASTM D1735; ASTM D2247; ASTM D2794; ASTM D522; ASTM D610; ASTM D714; ASTM D1654; ASTM D3363; ASTM B117; ASTM D870; ISO 2812-3; ISO 2812-4; ISO 6270-2; ISO 6860; ISO 4628-1; ISO 4628-2; ISO 4628-3; ISO 4628-8; ISO 4628-10; ISO 17872; ISO 15184; ISO 9227
ISO/IEC 17025:2017; AA-0180; ASTM D3359; BI 106-01; DBL 7399-5.1; DX900161; GMW14829; HES D6501-3.6; HOR10007#7; ISO 2409; JDH612#8; JDQ 17; JDQ 139; MBN 10494-5 Section 5.1.1; MBN 10494-5 Section 5.1.2; MBN 10494-5 Section 5.4; MES MN 601-8; NES M0007-29; TSH 1551G-4.1; TSH 1551G-4.2; TSH 1551G-4.3; CEMS GT-5A; AA-0079; ASTM D3170; BI 107-01; BI 157-04; BI 157-06; DBL 7399-5.3; DX900163; GMW14700 (Method B and C); HES D6501-3.33; ISO 20567-1; JDH612#11; JDQ 118; MBN 10494-5 Section 5.2.1; MBN 10494-5 Section 5.2.2; MES MN 601-30; NES M0007-28; SAE J400; TSH 1553G; CEMS GT-28; ASTM D5402; ASTM D4752; DX900120; GMW15891; HOR10007#10; LP-463PB-31-01; TS430-7; TSH 1551G-5.2; AA-0224; BI 123-01; BI 123-03 (Manual); BQ104-07 (Method 1; Procedures 1-6); CETP 00.00-L-467; DBL 7399-7.3; DX900115; DX900119; GMW14124 Cycle J; GMW14872; GMW15288; Honda 5100Z-SEO-0000 (Cyclic Corrosion); ISO 11997-1 (Cycle B); LP-463PB-22-01 (Method II and IV); LP-463PB-52-01; MBN 10494-6 Section 5.4; NES M0007-33.4; PV1210; SAE J2334; SAE J1563 Section 10 figure 4; VDA 621-415; ASTM D2803; HES D6501-3.16.1; ASTM D7091 (Type 2-Electronic); BI 117-01; HES D6501-3.2.2; ISO 3882 (4.2); JIS D0202-4.14; MBN 10494-1 Section 5.3.1; NES M0007-4.4.5
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
3 lines
ISO/IEC 17025
Active1391.01
The scope document we hold says it is valid until 2028-02-29.
Accredited scope, certificate 1391.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017; AA-0180; ASTM D3359; BI 106-01; DBL 7399-5.1; DX900161; GMW14829; HES D6501-3.6; HOR10007#7; ISO 2409; JDH612#8; JDQ 17; JDQ 139; MBN 10494-5 Section 5.1.1; MBN 10494-5 Section 5.1.2; MBN 10494-5 Section 5.4; MES MN 601-8; NES M0007-29; TSH 1551G-4.1; TSH 1551G-4.2; TSH 1551G-4.3; CEMS GT-5A; AA-0079; ASTM D3170; BI 107-01; BI 157-04; BI 157-06; DBL 7399-5.3; DX900163; GMW14700 (Method B and C); HES D6501-3.33; ISO 20567-1; JDH612#11; JDQ 118; MBN 10494-5 Section 5.2.1; MBN 10494-5 Section 5.2.2; MES MN 601-30; NES M0007-28; SAE J400; TSH 1553G; CEMS GT-28; ASTM D5402; ASTM D4752; DX900120; GMW15891; HOR10007#10; LP-463PB-31-01; TS430-7; TSH 1551G-5.2; AA-0224; BI 123-01; BI 123-03 (Manual); BQ104-07 (Method 1; Procedures 1-6); CETP 00.00-L-467; DBL 7399-7.3; DX900115; DX900119; GMW14124 Cycle J; GMW14872; GMW15288; Honda 5100Z-SEO-0000 (Cyclic Corrosion); ISO 11997-1 (Cycle B); LP-463PB-22-01 (Method II and IV); LP-463PB-52-01; MBN 10494-6 Section 5.4; NES M0007-33.4; PV1210; SAE J2334; SAE J1563 Section 10 figure 4; VDA 621-415; ASTM D2803; HES D6501-3.16.1; ASTM D7091 (Type 2-Electronic); BI 117-01; HES D6501-3.2.2; ISO 3882 (4.2); JIS D0202-4.14; MBN 10494-1 Section 5.3.1; NES M0007-4.4.5 | painted metal substrates | - |
| 2 | ASTM D1308; ASTM D523; ASTM D1735; ASTM D2247; ASTM D2794; ASTM D522; ASTM D610; ASTM D714; ASTM D1654; ASTM D3363; ASTM B117; ASTM D870; ISO 2812-3; ISO 2812-4; ISO 6270-2; ISO 6860; ISO 4628-1; ISO 4628-2; ISO 4628-3; ISO 4628-8; ISO 4628-10; ISO 17872; ISO 15184; ISO 9227 | - | - |
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
PPG INDUSTRIAL ELECTROCOAT PERFORMANCE
TESTING LABORATORY
Springdale, PA
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 27th day of January 2026.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 1391.01
Valid to February 29, 2028 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- Michigan Testing InstituteSterling Heights, MI · ~353 kmA2LAShares 2 accredited test methodsASTM D3359ASTM D523
- National Exposure TestingSylvania, OH · ~355 kmA2LAShares 2 accredited test methodsASTM D3359ASTM D523
- Technical Finishing, Inc. - TestFlint, MI · ~425 kmA2LAShares 2 accredited test methodsASTM D3359ASTM D523
- ICC Evaluation ServiceElkhart, IN · ~537 kmA2LAShares 2 accredited test methodsASTM D3359ASTM D523
- Aerospace Testing ServicesNorman, OK · ~1,656 kmA2LAShares 2 accredited test methodsASTM D3359ASTM D523
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.