Roto Frank Fenster- und Türtechnologie GmbH Internationales Technologie Center
Wilhelm-Frank-Platz 1, 70771, Leinfelden-Echterdingen, Germany
- Accredited standards
- 12
- DAKKS certificates
- 3
- Site in our directory
- 1
What this lab is accredited for
Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 12 standard numbers and the 4 official names we hold. When no standard matches, it searches the method text of every scope line.
EN8
EN 1026
EN 1027
EN 1191
EN 1628
EN 1629
EN 1630
EN 12211
EN 13126-8
ISO4
ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
DIN EN 1026; DIN EN 1027; DIN EN 1191; DIN EN 12211; DIN EN 13126 -8; RAL -GZ 607/9; DIN EN 1628; DIN EN 1629; DIN EN 1630
DIN EN ISO 6506 -1; DIN EN ISO 6507 -1; DIN EN ISO 6508 -1; DIN EN ISO 9227
Read from the scope as published by DAKKS. Register refreshed 2026-11-06.
Scope as published by DAKKS
5 lines
ISO/IEC 17025
ActiveD-PL-21397-01-00
Accredited scope, certificate D-PL-21397-01-00
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
ISO/IEC 17025
ActiveD-PL-21397-01-01
Accredited scope, certificate D-PL-21397-01-01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | DIN EN ISO/IEC 17025:2018; DIN EN ISO 9001 | facade elements like windows, doors and fittings | - |
| 2 | DIN EN 1026; DIN EN 1027; DIN EN 1191; DIN EN 12211; DIN EN 13126 -8; RAL -GZ 607/9; DIN EN 1628; DIN EN 1629; DIN EN 1630 | windows and doors; Pedestrian doorsets, windows, curtain walling, grilles and shutters | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
ISO/IEC 17025
ActiveD-PL-21397-01-02
Accredited scope, certificate D-PL-21397-01-02
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | - | MetalShow page textExtracted from the scope document; tables may not line up. View scope for the original. This certificate annex is only valid together with the written accreditation certificate and reflects the status as indicated by the
date of issue. The current status of any given scope of accreditation can be found in the directory of accredited bodies
maintained by Deutsche Akkreditierungsstelle GmbH at https://www.dakks.de.
Abbreviations used: see last page Page 1 of 2
This document is a translation. The definitive version is the original German annex to the accreditation certificate.
Deutsche Akkreditierungsstelle
Annex to the Partial Accreditation Certificate
D-PL-21397-01-02
according to DIN EN ISO/IEC 17025:2018
Valid from : 17.05.2023
Date of issue : 17.05.2023
This annex is a part of the accreditation certificate D-PL-21397-01-00.
Holder of partial accreditation certificate:
Roto Frank Fenster- und Türtechnologie GmbH
Internationales Technologie Center (ITC)
Wilhelm-Frank-Platz 1, 70771 Leinfelden-Echterdingen
The testing laboratory meets the requirements of DIN EN ISO/IEC 17025:2018 to carry out the
conformity assessment activities listed in this annex. The testing laboratory meets additional legal and
normative requirements, if applicable, including those in relevant sectoral schemes, provided that
these are explicitly confirmed below.
The management system requirements of DIN EN ISO/IEC 17025 are written in the language relevant
to the operations of testing laboratories and confirm generally with the principles of DIN EN ISO 9001.
Mechanical-technological tests of metallic materials as well as corrosion tests
The testing laboratory is permitted, without being required to inform and obtain prior approval
from DAkkS, to use standards or equivalent testing methods listed here with different issue dates.
The testing laboratory maintains a current list of all testing methods within the flexible scope of
accreditation. | - |
| 2 | DIN EN ISO 6506 -1; DIN EN ISO 6507 -1; DIN EN ISO 6508 -1; DIN EN ISO 9227 | Metal | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in Germany
- encontecStuttgart · ~12 kmDAKKSShares 3 accredited methods and materialsEN ISO 6507-1EN ISO 9001Metal
- Quality AnalysisNürtingen · ~17 kmDAKKSShares 3 accredited methods and materialsEN ISO 6507-1EN ISO 9001Metal
- SIGMA KARLSRUHE GmbH Ingenieurleistungen für das Bauen Prüfinstitut für BaukonstruktionenMalsch · ~64 kmDAKKSShares 3 accredited methods and materialsEN ISO 6507-1EN ISO 9001Metal
- Element Materials Technology AalenAalen · ~68 kmDAKKSShares 3 accredited methods and materialsEN ISO 6507-1EN ISO 9001Metal
- Adolf Würth GmbH & Co. KG WürthKünzelsau · ~73 kmDAKKSShares 3 accredited methods and materialsEN ISO 6507-1EN ISO 9001Metal
Accreditation data refreshed from the DAKKS register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.