United States

Mytex Polymers US Corp Chemtrusion

1403 Port Rd., Building 2, 47130, Jeffersonville, IN, United States

A2LA 2685.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 33
A2LA certificate: 1
Site in our directory: 1

A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 33 standard numbers and the 23 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO18

ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method

ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite

ISO 178Plastics - Determination of flexural properties

ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test

ISO 180Plastics - Determination of Izod impact strength

ISO 188Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests

ISO 291Plastics - Standard atmospheres for conditioning and testing

ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles

ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics

ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method

Show all 18

ISO 2039-2Plastics - Determination of hardness - Part 2: Rockwell hardness

ISO 3451-1Plastics - Determination of ash - Part 1: General methods

ISO 6603-2Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing

ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles

ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization

ISO 11359-2Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature

ASTM15

ASTM D256

ASTM D523Standard Test Method for Specular Gloss

ASTM D618

ASTM D638Standard Test Method for Tensile Properties of Plastics

ASTM D648

ASTM D785

ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

ASTM D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

ASTM D1238

ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness

ASTM D3012

ASTM D3045

ASTM D3763

ASTM D5420

ASTM D5630

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

3 lines

A2LA

ISO/IEC 17025

Active

2685.01

The scope document we hold says it is valid until 2028-03-31.

View scope

Accredited scope, certificate 2685.01

Line	Method	Matrix	Range
1	ASTM D638; ISO 527-1; ISO 527-2; ASTM D1238; ISO 1133-1; ASTM D2240; ISO 868; ASTM D256; ISO 180/A; ISO 179-1; ASTM D5630, Method B; ISO 3451-1, Method A; ASTM D3012; ISO 188; ASTM D3045; ASTM D3763; ISO 6603-2; ASTM D5420; ASTM D618; ISO 291; ASTM D648 (Method B); ISO 75-1; ISO 75-2; ISO/IEC 17025:2017	plastics and rubber	-
2	ASTM D785; ISO 2039-2; ASTM D792 (Method A); ISO 1183-1 (Method A); ASTM D790; ISO 178; ISO 11357-1; ISO 11357-3; ISO 11359-2; HES 2500, Section 3.2; SAE J2412; SAE J2527; ASTM D523; GMW 14688 (Method A); SAE J1756; FMVSS 302	-	-
3	Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited MYTEX POLYMERS US CORP CHEMTRUSION INC. Jeffersonville, IN for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 19th day of February 2026. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 2685.01 Valid to March 31, 2028

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

1403 Port Rd., Building 2, Jeffersonville, IN, 47130, US

38.27702, -85.73716

Open in Maps

← All accredited testing labs in Indiana

← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.