United States
TRS-RenTelco
P.O. Box 619260, 1830 West Airfield Drive, 75261, DFW Airport, TX, United States
Visit websiteA2LA 2681.01ISO/IEC 17025Register refreshed 2026-11-06
- Scope lines
- 38
- A2LA certificate
- 1
- Site in our directory
- 1
A2LA accredited scope
What this lab is accredited for
We could not match the method references in this lab’s scope to published test standard numbers. The full scope as published is below.
Only this lab. Searches the method, matrix and range of each of the 38 scope lines.
A2LA certificate 2681.01 · 38 lines
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1994; ANSI/NCSL Z540.3-2006 | - | See scope document |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 2 of 37
Parameter/Equipment
Range
CMC2, 7, 8, 9 (±)
Comments
DC Voltage – Generate
(cont)
Variable DC
(0 to 220) mV
(0.22 to 2.2) V
(2.2 to 11) V
(11 to 22) V
(22 to 220) V
(220 to 1100) V
8.5 µV/V + 0.40 µV
5.2 µV/V + 0.70 µV
3.7 µV/V + 2.5 µV
3.7 µV/V + 4.0 µV
5.2 µV/V + 40 µV
6.7 µV/V + 400 µV
Fluke 5730A
DC Current – Generate
(0 to 220) µA
(0.22 to 2.2) mA
(2.2 to 22) mA
(22 to 220) mA
(0.22 to 2.2) A
(2.2 to 20) A
(20 to 100) A
(100 to 5000) A
41 µA/A + 6.0 nA
36 µA/A + 7.0 nA
36 µA/A + 40 nA
46 µA/A + 0.70 µA
84 µA/A + 12 µA
0.17 mA/A + 1.6 mA
0.13 mA/A + 9.6 mA
6.5 mA/A + 0.54 A
Fluke 5730A
Fluke 5730A/52120A
Fluke 5730A/52120A,
Coil 3KA, coil 6KA
DC Current – Measure3
(1 to 10) µA
(10 to 100) µA
(0.1 to 1) mA
(1 to 10) mA
(10 to 100) mA
(0.1 to 1) A
(1 to 10) A
(10 to 100) A
(100 to 300 A
(300 to 1000) A
32 µA/A
9.4 µA/A + 7.6 pA
9.9 µA/A + 10 pA
10 µA/A + 8.0 nA
12 µA/A + 70 nA
7 µA/A + 0.90 µA
15 µA/A 3.0 µA
0.047 %
0.023 %
0.054 %
Fluke 8508A, Guildline
9211A shunt
Fluke 8508A, L&N
4XXXB resistors
Fluke 8508A, Guildline
Fluke 8508A, Ohm-
Labs CS-1000
Parameter/Range
Frequency
CMC2, 8, 9 (±)
Comments
AC Voltage – Measure
4
600 µV to 2.2 mV
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
1.8 mV/V + 1.3 µV
0.76 mV/V + 1.3 µV
0.44 mV/V + 1.3 µV
0.83 mV/V + 2 µV
Fluke 5790B | ||
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 3 of 37
Parameter/Range
Frequency
CMC2, 8, 9 (±)
Comments
AC Voltage – Measure
4
(cont)
600 µV to 2.2 mV
(2.2 to 7) mV
(7 to 22) mV
(22 to 70) mV
(70 to 220) mV
(220 to 700) mV
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
1.3 mV/V + 2.5 µV
2.4 mV/V + 4.0 µV
2.5 mV/V + 8.0 µV
3.7 mV/V + 8.0 µV
0.86 mV/V + 1.3 µV
0.38 mV/V + 1.3 µV
0.22 mV/V + 1.3 µV
0.41 mV/V + 2.0 µV
0.61 mV/V + 2.5 µV
1.3 mV/V + 4.0 µV
1.4 mV/V + 8.0 µV
2.4 mV/V + 8.0 µV
0.30 mV/V + 1.3 µV
0.20 mV/V + 1.3 µV
0.12 mV/V + 1.3 µV
0.22 mV/V + 2.0 µV
0.32 mV/V + 2.5 µV
0.83 mV/V + 4.0 µV
0.92 mV/V + 8.0 µV
1.8 mV/V + 8.0
µV
0.26 mV/V + 1.5 µV
0.14 mV/V + 1.5 µV
80 µV/V + 1.5 µV
0.15 mV/V + 2.0 µV
0.30 mV/V + 2.5 µV
0.58 mV/V + 4.0 µV
0.75 mV/V + 8.0 µV
1.2 mV/V + 8.0 µV
0.22 mV/V + 1.5 µV
89 µV/V + 1.5 µV
42 µV/V + 1.5 µV
79 µV/V + 2.0 µV
0.18 mV/V + 2.5 µV
0.28 mV/V + 4.0 µV
0.40 mV/V + 8.0 µV
1.1 mV/V + 8.0 µV
0.22 mV/V + 1.5 µV
84 µV/V + 1.5 µV
36 µV/V + 1.5 µV
56 µV/V + 2.0 µV
Fluke 5790B | ||
| 4 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 4 of 37
Parameter/Range
Frequency
CMC2, 8, 9 (±)
Comments
AC Voltage – Measure4
(cont)
(220 to 700) mV
(0.7 to 2.2) V
(2.2 to 7) V
(7 to 22) V
(22 to 70) V
(70 to 220) V
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
83 µV/V + 2.5 µV
0.21 mV/V + 4.0 µV
0.32 mV/V + 8.0 µV
0.98 mV/V + 8.0 µV
0.21 mV/V
70 µV/V
26 µV/V
49 µV/V
73 µV/V
0.19 mV/V
0.28 mV/V
0.94 mV/V
0.21 mV/V
71 µV/V
26 µV/V
53 µV/V
84 µV/V
0.21 mV/V
0.41 mV/V
1.3 mV/V
0.21 mV/V
71 µV/V
30 µV/V
50 µV/V
83 µV/V
0.21 mV/V
0.41 mV/V
1.3 mV/V
0.21 mV/V
72 µV/V
36 µV/V
65 µ
V/V
99 µV/V
0.22 mV/V
0.42 mV/V
1.2 mV/V
0.21 mV/V
72 µV/V
36 µV/V
71 µV/V
Fluke 5790B | ||
| 5 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 5 of 37
Parameter/Range
Frequency
CMC2, 8, 9 (±)
Comments
AC Voltage – Measure
4
(cont)
(70 to 220) V
(220 to 700) V
(700 to 1000) V
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
0.10 mV/V
0.22 mV/V
0.50 mV/V
0.20 mV/V
99 µV/V
45 µV/V
0.14 mV/V
0.51 mV/V
0.20 mV/V
99 µV/V
46 µV/V
0.14 mV/V
0.51 mV/V
Fluke 5790B
AC Voltage – Generate
(0.22 to 2.2) mV
(2.2 to 22) mV
(22 to 220) mV
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
0.37 mV/V + 4.0 µV
0.22 mV/V + 4.0 µV
0.23 mV/V + 4.0 µV
0.53 mV/V + 4.0 µV
0.75 mV/V + 5.0 µV
1.3 mV/V + 10 µV
1.7 mV/V + 20 µV
3.4 mV/V + 20 µV
0.26 mV/V + 4.0 µV
0.10 mV/V + 4.0 µV
98 µV/V + 4.0 µV
0.23 mV/V + 4.0 µV
0.53 mV/V + 5.0 µV
1.1 mV/V + 10 µV
1.5 mV/V + 20 µV
3.0 mV/V + 20 µV
0.25 mV/V + 12 µV
0.10 mV/V + 7.0 µV
64 µV/V + 7.0 µV
0.13 mV/V + 7.0 µV
0.32 mV/V + 17 µV
0.67 mV/V + 20 µV
1.4 mV/V + 25 µV
2.8 mV/V + 45 µV
Fluke 5730A | ||
| 6 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 6 of 37
Parameter/Range
Frequency
CMC2, 8, 9 (±)
Comments
AC Voltage – Generate
(cont)
(0.22 to 2.2) V
(2.2 to 22) V
(22 to 220) V
(220 to 750) V
(750 to 1100) V
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
(100 to 300) kHz
(300 to 500) kHz
500 kHz to 1 MHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 20 kHz
(20 to 50) kHz
(50 to 100) kHz
50 Hz to 1 kHz
(1 to 20) kHz
(20 to 30) kHz
(30 to 50) kHz
(50 to 100) kHz
50 Hz to 1 kHz
(1 to 20) kHz
(20 to 30) kHz
0.25 mV/V + 40 µV
99 µV/V + 15 µV
51 µV/V + 8.0 µV
73 µV/V + 10 µV
90 µV/V + 30 µV
0.35 mV/V + 80 µV
1.0 mV/V + 0.20 mV
1.8 mV/V + 0.30 mV
0.26 mV/V + 0.40 mV
98 µV/V + 0.15 mV
52 µV/V + 50 µV
73 µV/V + 0.10 mV
88 µV/V + 0.20 mV
0.27 mV/V + 0.60 mV
1.0 mV/V + 2.0 mV
1.6 mV/V + 3.2 mV
0.26 mV/V + 4.0 mV
0.10 mV/V + 1.5 mV
60 µV/V + 0.60 mV
89 µV/V + 1.0 mV
0.16 mV/V + 2.5 mV
82 µV/V + 3.5 mV
0.17 mV/V + 6.0 mV
0.61 mV/V + 11 mV
0.61 mV/V + 11 mV
2.3 mV/V + 45 mV
82 µV/V + 3.5 mV
0.17 mV/V + 6.0 mV
0.61 mV/V + 11 mV
Fluke 5730A
Fluke 5730A, 5725A
AC Voltage – Measure
Wideband
4
(0.7 to 2.2) mV
10 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
0.44 % + 1.5 µV
0.35 % + 2.5 µV
0.37 % + 2.5 µV
0.41 % + 2.5 µV
0.56 % + 3.5 µV
0.75 % + 3.5 µV
5790B, option 05
wideband input –
50 Ω | ||
| 7 | - | -Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 7 of 37
Parameter/Range
Frequency
CMC2, 8, 9 (±)
Comments
AC Voltage – Measure
Wideband
4 (cont)
(2.2 to 7) mV
(7 to 22) mV
(22 to 70) mV
(70 to 220) mV
(220 to 700) mV
(0.7 to 2.2) V
(2.2 to 7) V
10 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
10 Hz to 500) kHz
500 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
10 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
10 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
10 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
10 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
10 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 10) MHz
0.37 % + 7.0 µV
0.35 % + 8.0 µV
0.36 % + 8.0 µV
0.37 % + 8.0 µV
0.44 % + 8.0 µV
0.50 % + 8 µV
0.38 % + 13 µV
0.38 % + 13 µV
0.39 % + 13 µV
0.40 % + 13 µV
0.46 % + 13 µV
0.58 % + 13 µV
0.38 % + 30 µV
0.38 % + 30 µV
0.39 % + 30 µV
0.40 % + 30 µV
0.46 % + 30 µV
0.59 % + 30 µV
0.31 % + 80 µV
0.31 % + 80 µV
0.31 % + 80 µV
0.33 % + 80 µV
0.40 % + 80
µV
0.54 % + 80 µV
0.30 % + 0.30 mV
0.31 % + 0.30 mV
0.31 % + 0.30 mV
0.32 % + 0.30 mV
0.40 % + 0.30 mV
0.54 % + 0.30 mV
0.27 % + 0.40 mV
0.28 % + 0.40 mV
0.29 % + 0.40 mV
0.31 % + 0.40 mV
0.44 % + 0.40 mV
0.65 % + 0.4 mV
0.27 % + 0.80 mV
0.28 % + 0.80 mV
0.28 % + 0.80 mV
5790B, option 05
wideband input –
50 Ω | 2.2 to 7 V |
| 8 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 8 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
AC Voltage – Measure
Wideband
4 (cont)
(2.2 to 7) V
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
0.30 % + 0.80 mV
0.38 % + 0.80 mV
0.54 % + 0.80 mV
5790B, option 05
wideband input –
50 Ω
AC Voltage – Generate
Wideband
(0.3 to 1.1) mV
(1.1 to 3) mV
(3 to 11) mV
(11 to 33) mV
(33 to 110) mV
(10 to 30) Hz
30 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 12) MHz
(12 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 12) MHz
(12 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 12) MHz
(12 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 12) MHz
(12 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 12) MHz
(12 to 20) MHz
0.62 % + 2.0 µV
0.58 % + 2.0 µV
0.37 % + 5.0 µV
0.45 % + 5.0 µV
0.55 % + 5.0 µV
0.76 % + 17 µV
1.9 % + 17 µV
0.57 % + 3.0 µV
0.53 % + 3.0 µV
0.44 % + 6.0 µV
0.50 % + 6.0 µV
0.58 % + 6.0 µV
1.2 % + 6.0 µV
2.3 % + 6 µV
0.57 % + 8.0 µV
0.53 % + 8.0 µV
0.51 % + 11 µV
0.53 % + 11 µV
0.59 % + 11 µV
0.90 % + 11 µV
1.6 % + 11 µV
0.51 % + 16 µV
0.46 % + 16 µV
0.46 % + 19 µV
0.47 % + 19 µV
0.54 % + 19 µV
0.88 % + 19 µV
1.6 % + 19 µV
0.51 % + 40 µV
0.46 % + 40 µV
0.46 % + 43 µV
0.48 % + 43 µV
0.54 % + 43 µV
Fluke 5730A, option 05
wideband output – 50
Ω | ||
| 9 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 9 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
AC Voltage – Generate
Wideband (cont)
(33 to 110) mV
(110 to 330) mV
(0.33 to 1.1) V
(1.1 to 3.5) V
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 12) MHz
(12 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 12) MHz
(12 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
0.89 % + 43 µV
1.6 % + 43 µV
0.45 % + 0.10 mV
0.45 % + 0.10 mV
0.45 % + 0.11 mV
0.47 % + 0.11 mV
0.54 % + 0.11 mV
0.88 % + 0.11 mV
1.6 % + 0.11 mV
0.44 % + 0.4 mV
0.38 % + 0.40 mV
0.39 % + 0.41 mV
0.41 % + 0.41 mV
0.49 % + 0.41 mV
0.85 % + 0.41 mV
1.6 % + 0.41 mV
0.39 % + 0.50 mV
0.31 % + 0.50 mV
0.32 % + 0.51 mV
0.35 % + 0.51 mV
0.44 % + 0.51 mV
0.83 % + 0.51 mV
1.6 % + 0.51 mV
Fluke 5730A, option 05
wideband output – 50
Ω
AC Voltage – Measure
Flatness With 1 kHz
Reference
4
(0.7 to 2.2) mV
(2.2 to 7) mV
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 2 MHz
(2 to 10) MHz
0.54 %
0.53 %
0.54 %
0.57 %
0.61 %
0.65 %
1.1 %
0.49 %
0.49 %
0.49 %
0.49 %
5790B, option 05
wideband input –
50 Ω | ||
| 10 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 10 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
AC Voltage – Measure
Flatness With 1 kHz
Reference
4 (cont)
(2.2 to 7) mV
(7 to 22) mV
(22 to 70) mV
(70 to 220) mV
(220 to 700) mV
(0.7 to 2.2) V
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 120 kHz
120 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
(10 to 30) Hz
30 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
0.51 %
0.51 %
0.64 %
0.45 %
0.44 %
0.45 %
0.45 %
0.45 %
0.53 %
0.65 %
0.44 %
0.43 %
0.44 %
0.45 %
0.51 %
0.64 %
0.39 %
0.38 %
0.38 %
0.39 %
0.39 %
0.47 %
0.60 %
0.40 %
0.39 %
0.39 %
0.40 %
0.41 %
0.47 %
0.61 %
0.30 %
0.29 %
0.29 %
0.30 %
0.31 %
0.40 %
0.55 %
5790B, option 05
wideband input –
50 Ω | ||
| 11 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 11 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
AC Voltage – Measure
Flatness With 1 kHz
Reference
4 (cont)
(2.2 to 7) V
(10 to 30) Hz
30 Hz to 500 kHz
500 kHz to 2 MHz
(2 to 10) MHz
(10 to 20) MHz
(20 to 30) MHz
(30 to 50) MHz
0.31 %
0.30 %
0.30 %
0.31 %
0.32 %
0.40 %
0.55 %
5790B, option 05
wideband input –
50 Ω
AC Current – Measure3, 4
(20 to 200) µA
(0.2 to 2) mA
(2 to 10) mA
(10 to 20) A
(10 to 20) mA
(20 to 30) mA
(30 to 50) mA
(50 to 100) mA
10 Hz to 10 kHz
10 Hz to 10 kHz
10 Hz to 10 kHz
10 Hz to 2 kHz
(2 to 10) kHz
(10 to 20) Hz
(20 to 30) Hz
(30 to 40) Hz
(40 to 500) Hz
500 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 20) Hz
(20 to 30) Hz
(30 to 40) Hz
(40 to 500) Hz
500 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 20) Hz
(20 to 30) Hz
(30 to 40) Hz
(40 to 500) Hz
500 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 20) Hz
(20 to 30) Hz
(30 to 40) Hz
0.034 % + 0.020 µA
0.031 % + 0.20 µA
0.032 % + 2.0 µA
0.084 % + 2.0 mA
0.26 % + 2.0 mA
73 µA/A + 40 nA
63 µA/A + 0.14 µA
14 µA/A + 0.6 µA
42 µA/A + 50 nA
33 µA/A + 0.15 µA
40 µA/A + 30 nA
41 µA/A + 40 nA
70 µA/A + 0.10 µA
60 µA/A + 0.30 µA
38 µA/A + 0.16 µA
34 µA/A + 0.28 µA
34 µA/A + 0.28 µA
42 µA/A + 40 nA
49 µA/A – 70 nA
0.12 mA/A – 2.3 µA
65 µA/A + 0.25 µA
5 µA/A + 2.0 µA
45 µA/A – 50 nA
35 µA/A + 0.25 µA
40 µA/A + 0.10 µA
40 µA/A + 0.10 µA
70 µA/A + 0.30 µA
66 µA/A + 0.40 µA
12 µA/A + 3.0 µA
Fluke 8508A
L&N 4XXXB, Fluke
A40, 5790B | ||
| 12 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 12 of 37
Parameter/Range
Frequency
CMC2, 8, 9 (±)
Comments
AC Current – Measure
4
(cont)
(50 to 100) mA
(100 to 200) mA
(200 to 300) mA
(300 to 500) mA
(0.5 to 1) A
(1 to 2) A
(2 to 3) A
(40 to 500) Hz
500 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 20) Hz
(20 to 30) Hz
(30 to 40) Hz
(40 to 500) Hz
500 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 20) Hz
(20 to 30) Hz
(30 to 40) Hz
(40 to 500) Hz
500 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 20) Hz
(20 to 30) Hz
(30 to 40) Hz
(40 to 500) Hz
500 Hz to 10 kHz
(10 to 20) Hz
(20 to 30) Hz
(30 to 40) Hz
(40 to 500) Hz
500 Hz to 5 kHz
(5 to 10) kHz
(10 to 20) Hz
(20 to 30) Hz
(30 to 40) Hz
40 Hz to 10 kHz
(40 to 500) Hz
500 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
46 µA/A – 0.10 µA
34 µA/A + 60 nA
40 µA/A + 0.10 µA
44 µA/A – 0.10 µA
0.17 mA/A + 1.0 µA
58 µA/A + 2.4 µA
59 µA/A + 2.2 µA
42 µA/A – 0.30 µA
30 µA/A + 2.0 µA
38 µA/A + 0.80 µA
37 µA/A + 1.0 µA
30 µA/A + 5.0 µA
44 µA/A + 0.80 µA
38 µA/A + 1.6 µA
48 µA/A – 0.40 µA
33 µA/A + 3.1 µA
41 µA/A + 0.70 µA
50 µA/A – 1.0 µA
70 µA/A + 1.0 µA
65 µA/A + 2.5 µA
21 µA
40 µA/A – 1.0 µA
40 µA/A + 1.0 µA
74 µA/A + 6.0 µA
2 µA/A + 40 µA
4 µA/A + 37 µA
38 µA/A + 4.0 µA
36 µA/A + 5.0 µA
38 µA/A + 4.0 µA
0.18 mA
70 µA/A + 20 µA
37 µA/A + 46 µA
58 µA/A – 6.0 µA
70 µA/A – 4.0 µA
50 µA/A + 10 µA
60 µA/A – 20 µA
70 µA/A – 40 µA
L&N 4XXXB, Fluke
A40, 5790B | ||
| 13 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 13 of 37
Parameter/Range
Frequency
CMC2, 8, 9 (±)
Comments
AC Current – Measure
4
(cont)
(2 to 3) A
40 Hz to 10 kHz
(40 to 500) Hz
500 Hz to 1 kHz
(1 to 10) kHz
55 µA/A + 5.0 µA
58 µA/A + 20 µA
58 µA/A + 20 µA
60 µA/A
L&N 4XXXB, Fluke
A40, 5790B
AC Current – Generate
(9 to 220) µA
(0.22 to 2.2) mA
(2.2 to 22) mA
(22 to 220) mA
(0.22 to 2) A
(2 to 20) A
(20 to 120) A
(120 to 6000) A
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 20) Hz
(20 to 40) Hz
40 Hz to 1 kHz
(1 to 5) kHz
(5 to 10) kHz
(10 to 850) Hz
850 Hz to 6 kHz
(6 to 10) kHz
(10 to 850) Hz
850 Hz to 6 kHz
(10 to 850) Hz
850 Hz to 6 kHz
(1 to 100) Hz
0.026 % + 16 nA
0.017 % + 10 nA
0.012 % + 8.0 nA
0.032 % + 12 nA
0.12 % + 65 nA
0.027 % + 40 nA
0.017 % + 35 nA
0.011 % + 35 nA
0.021 % + 110 nA
0.11 % + 650 nA
0.028 % + 400 nA
0.018 % + 350 nA
0.011 % + 350 nA
0.021 % + 550 nA
0.11 % + 5.0 µA
0.028 % + 4.0 µA
0.018 % + 3.5 µA
0.012 % + 2.5 µA
0.022 % + 3.5 µA
0.11 % + 10 µA
0.012 % + 40 µA
0.041 % + 80 µA
0.71 % + 0.16 mA
0.011 % + 0.4 mA
0.041 % + 0.8 mA
0.012 % + 2.4 mA
0.032 % + 4.8 mA
0.54 % + 0.55 A
Fluke 5730A
Fluke 5730A/52120A
Fluke 5730A/52120A,
coil 3KA, coil 6KA | ||
| 14 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 14 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
AC Current High
Frequency – Generate
1 A
5 A
10 A
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 10) kHz
(10 to ≤ 30) kHz
(30 to ≤ 70) kHz
(70 to ≤ 100) kHz
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 10) kHz
(10 to ≤ 30) kHz
(30 to ≤ 70) kHz
(70 to ≤ 100) kHz
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to
≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 10) kHz
(10 to ≤ 30) kHz
(30 to ≤ 70) kHz
(70 to ≤ 100) kHz
0.015 %
0.22 %
0.075 %
0.072 %
0.072 %
0.044 %
0.044 %
0.045 %
0.075 %
0.15 %
0.37 %
0.37 %
0.014 %
0.061 %
0.032 %
0.029 %
0.029 %
0.024 %
0.024 %
0.025 %
0.032 %
0.064 %
0.15 %
0.15 %
0.014 %
0.061 %
0.032 %
0.029 %
0.029 %
0.024 %
0.024 %
0.025 %
0.032 %
0.064 %
0.15 %
0.15 %
Fluke 8508A, Fluke
A40B-100A, Clarke-
Hess 8100, single
current loop
Fluke 8508A, Fluke
A40B-100A, Clarke-
Hess 8100, 2x current
loop | ||
| 15 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 15 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
AC Current High
Frequency – Generate
(cont)
10 A
20 A
30 A
40 A
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 10) kHz
(10 to ≤ 30) kHz
(30 to ≤ 60) kHz
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 10) kHz
(10 to ≤ 30) kHz
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to
≤ 10) kHz
(10 to ≤ 25) kHz
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 10) kHz
(10 to ≤ 20) kHz
0.014 %
0.042 %
0.027 %
0.024 %
0.024 %
0.022 %
0.022 %
0.023 %
0.027 %
0.053 %
0.12 %
0.014 %
0.033 %
0.024 %
0.022 %
0.022 %
0.021 %
0.021 %
0.021 %
0.024 %
0.048 %
0.013 %
0.076 %
0.027 %
0.024 %
0.024 %
0.023 %
0.023 %
0.024 %
0.027 %
0.047 %
0.012 %
0.061 %
0.024 %
0.022 %
0.022 %
0.021 %
0.021 %
0.022 %
0.025 %
0.042 %
Fluke 8508A, Fluke
A40B-100A, Clarke-
Hess 8100, 2x current
loop | ||
| 16 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 16 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
AC Current High
Frequency – Generate
(cont)
50 A
60 A
70 A
80 A
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 10) kHz
(10 to ≤ 15) kHz
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 10) kHz
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 10) kHz
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 10) kHz
0.011 %
0.053 %
0.023 %
0.020 %
0.020 %
0.019 %
0.019 %
0.020 %
0.023 %
0.039 %
0.0097 %
0.047 %
0.021 %
0.019 %
0.019 %
0.017 %
0.017 %
0.018 %
0.021 %
0.0081 %
0.043 %
0.020 %
0.017 %
0.017 %
0.016 %
0.016 %
0.017 %
0.020 %
0.0063 %
0.040 %
0.019 %
0.016 %
0.016 %
0.015 %
0.015 %
0.016 %
0.019 %
Fluke 8508A, Fluke
A40B-100A, Clarke-
Hess 8100, 2x current
loop
Fluke 8508A, Fluke
A40B-100A, Clarke-
Hess 8100, single
current loop | ||
| 17 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 17 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
AC Current High
Frequency – Generate
(cont)
90 A
100 A
500 A
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 8) kHz
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
(2 to ≤ 8) kHz
DC
(1 to ≤ 10) Hz
(10 to ≤ 40) Hz
(40 to ≤ 55) Hz
(55 to ≤ 100) Hz
(100 to ≤ 400) Hz
(0.4 to ≤ 1) kHz
(1 to ≤ 2) kHz
0.0047 %
0.037 %
0.018 %
0.015 %
0.015 %
0.014 %
0.014 %
0.015 %
0.018 %
0.0039 %
0.035 %
0.017 %
0.015 %
0.015 %
0.013 %
0.013 %
0.015 %
0.018 %
0.0039 %
0.035 %
0.017 %
0.015 %
0.015 %
0.013 %
0.013 %
0.015 %
Fluke 8508A, Fluke
A40B-100A, Clarke-
Hess 8100, single
current loop
Fluke 8508A, Fluke
A40B-100A, Clarke-
Hess 8100, single
current loop
AC Power – Simulated
(5 to 120) kW
(45 to 1000) Hz
25 watts +
(0.0015ꞏW)
Fluke 5522A
PF = 1
AC Voltage/Current
Phase – Generate
Voltage vs. Voltage
(0 to 90)°
(10 to 65) Hz
(65 to 500) Hz
(0.5 to 1) kHz
0.095°
0.21°
0.40°
Fluke 5522A | ||
| 18 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 18 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
AC Voltage/Current
Phase – Generate (cont)
Voltage vs. Current
(0 to 90)°
(10 to 65) Hz
(65 to 500) Hz
0.093°
0.22°
Fluke 5522A
Parameter/Equipment
Range
CMC2, 7, 8, 9 (±)
Comments
Resistance – Generate
Variable
Fixed Points
(0 to 10.999) Ω
(11 to 32.9999) Ω
(33 to 109.9999) Ω
(110 to 329.999) Ω
(0.33 to 1.099 999) kΩ
(1.1 to 3.299 999) kΩ
(3.3 to 10.999 99) kΩ
(11 to 32.999 99) kΩ
(33 to 109.9999) kΩ
(110 to 329.9999) kΩ
(0.33 to 1.099 999) MΩ
(1.1 to 3.299 999) MΩ
(3.3 to 10.999 99) MΩ
(11 to 32.999 99) MΩ
(33 to 109.9999) MΩ
(110 to 329.9999) MΩ
(330 to 1100) MΩ
1 mΩ
10 mΩ
100 mΩ
1 Ω
10 Ω
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
100 MΩ
1 Ω
1.9 Ω
10 Ω/19 Ω
100 Ω/190 Ω
12 µΩ/Ω + 0.78 mΩ
13 µΩ/Ω + 1.2 mΩ
20 µΩ/Ω + 1.1 mΩ
21 µΩ/Ω + 1.6 mΩ
22 µΩ/Ω + 1.6 mΩ
22 µΩ/Ω + 16 mΩ
23 µΩ/Ω + 16 mΩ
22 µΩ/Ω + 0.16 Ω
23 µΩ/Ω + 0.16 Ω
25 µΩ/Ω + 1.6 Ω
26 µ
Ω/Ω + 1.6 Ω
46 µΩ/Ω + 24 Ω
0.11 mΩ/Ω + 39 Ω
0.18 mΩ/Ω + 1.9 kΩ
0.40 mΩ/Ω + 2.3 kΩ
2.3 mΩ/Ω + 78 kΩ
6.9 mΩ/Ω + 0.39 MΩ
62 µΩ/Ω
9.3 µΩ/Ω
1.1 µΩ/Ω
10 µΩ/Ω
8.7 µΩ/Ω
8.4 µΩ/Ω
12 µΩ/Ω
6.4 µΩ/Ω
8.8 µΩ/Ω
4.2 µΩ
/Ω
25 µΩ/Ω
26 µΩ/Ω
97 µΩ/Ω
96 µΩ/Ω
25 µΩ/Ω
11 µΩ/Ω
Fluke 5522A
L&N 4223B
L&N 4222B
L&N 4221B
L&N 4020B
L&N 4025B
L&N 4030B
L&N 4035B
IET SR104D
L&N 4045B
L&N 4050B
IET SRX-10M
IET SRX-100M
Fluke 5730A | ||
| 19 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 19 of 37
Parameter/Equipment
Range
CMC2, 8, 9 (±)
Comments
Resistance – Generate
(cont)
Fixed Points
1 kΩ/1.9 kΩ
10 kΩ
19 kΩ
100 kΩ
190 kΩ
1 MΩ
1.9 MΩ
10 MΩ
19 MΩ
100 MΩ
1 GΩ
10 GΩ
100 GΩ
1 TΩ
6.8 µΩ/Ω
6.8 µΩ/Ω
6.9 µΩ/Ω
8.8 µΩ/Ω
9.0 µΩ/Ω
14 µΩ/Ω
19 µΩ/Ω
42 µΩ/Ω
50 µΩ/Ω
0.11 mΩ/Ω
8.1 mΩ/Ω
10 mΩ/Ω
31 mΩ/Ω
54 mΩ/Ω
Fluke 5730A
IET, VRS-100-10-1K-
ROT
Resistance – Measure
Variable
Fixed Points
(0.2 to 2) Ω
(2 to 20) Ω
(20 to 200) Ω
(0.2 to 2) kΩ
(2 to 20) kΩ
(20 to 200) kΩ
(0.2 to 2) MΩ
(2 to 20) MΩ
(20 to 200) MΩ
(0.2 to 2) GΩ
(2 to 20) GΩ
0.000 33 Ω
0.001 Ω
0.01 Ω
0.1 Ω
1 Ω
10 Ω
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
100 MΩ
19 µΩ/Ω + 4.0
µΩ
10 µΩ/Ω + 14 µΩ
8.4 µΩ/Ω + 50 µΩ
8.2 µΩ/Ω + 0.5 mΩ
8.2 µΩ/Ω + 5.0 mΩ
8.4 µΩ/Ω + 50 mΩ
9.9 µΩ/Ω + 1.0 Ω
21 µΩ/Ω + 10Ω
68 µΩ/Ω + 1.0 kΩ
0.19 mΩ/Ω + 0.1 MΩ
1.6 mΩ/Ω + 10 MΩ
0.57 mΩ/Ω
0.54 mΩ/Ω
0.67 mΩ/Ω
43 µΩ/Ω
13 µΩ/Ω
12 µΩ/Ω
8.3 µΩ/Ω
7.1 µΩ/Ω
6.4 µΩ/Ω
7.2 µΩ/Ω
4.2 µΩ/Ω
31 µΩ/Ω
0.16 mΩ/Ω
Fluke 8508A
Fluke 8508A/
Guildline 9211A shunt
Fluke 8508A/ L&N
4XXXB resistors
Fluke 8508A/
ESI SR-104
Fluke 8508A/ L&N
IET SRX-XXM | ||
| 20 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 20 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
Capacitance – Generate
(0.19 to 0.3999) nF
(0.4 to 1.0999) nF
(1.1 to 3.2999) nF
(3.3 to 10.999) nF
(11 to 32.999) nF
(33 to 109.999) nF
(110 to 329.999) nF
(0.33 to 1.0999) µF
(1.1 to 3.2999) µF
(3.3 to 10.9999) µF
(11 to 32.9999) µF
(33 to 109.999) µF
(110 to 329.999) µF
(0.33 to 1.099 99) mF
(1.1 to 3.2999) mF
(3.3 to 10.9999) mF
(11 to 32.999) mF
(33 to 110) mF
Fixed Points:
1 pF
10 pF
100 pF
(0.01 to 10) kHz
(0.01 to 10) kHz
(0.01 to 3) kHz
(0.01 to 1) kHz
(0.01 to 1) kHz
(0.01 to 1) kHz
(0.01 to 1) kHz
(10 to 600) Hz
(10 to 300) Hz
(10 to 150) Hz
(10 to 120) Hz
(10 to 80) Hz
(0 to 50) Hz
(0 to 20) Hz
(0 to 6) Hz
(0 to 2) Hz
(0 to 0.6) Hz
(0 to 0.2) Hz
1 kHz to 1 MHz
2 MHz
3 MHz
4 MHz
5 MHz
10 MHz
13 MHz
1 kHz to 1 MHz
2 MHz/3 MHz
4 MHz/5 MHz
10 MHz
13 MHz
1 kHz to 1 MHz
2 MHz/3 MHz
4 MHz
5 MHz
10 MHz
13 MHz
0.42 % + 7.8 pF
0.18 % + 7.8 pF
0.33 % + 7.8 pF
0.18 % + 7.8 pF
0.13 % + 78 pF
0.18 % + 78 pF
0.18 % + 0.24 nF
0.18 % + 0.78 nF
0.18 % + 2.4 nF
0.19 % + 7.8 nF
0.30 % + 24 nF
0.35 % + 78 nF
0.35 % + 0.24 µF
0.35 % + 0.78 µF
0.33 % + 2.4 µF
0.34 % + 7.8 µF
0.57 % + 24 µF
0.84 % + 78 µF
0.017 %
0.027 %
0.044 %
0.065 %
0.089 %
0.25 %
0.37 %
0.011 %
0.011 %
0.012 %
0.016 %
0.019 %
0.011 %
0.012 %
0.014 %
0.017 %
0.035 %
0.050 %
Fluke 5522A
Fluke 5522A
Agilent 16380A
capacitor set | ||
| 21 | - | -Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 21 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
Capacitance – Generate
(cont)
Fixed Points:
1000 pF
0.01 µF
0.1 µF
10 µF
1 kHz to 1 MHz
2 MHz
3 MHz
4 MHz
5 MHz
10 MHz
13 MHz
(100/120) Hz
(1/10/100) kHz
(100/120) Hz/1 kHz
(1/10/100) kHz
(100/120) Hz
(1/10) kHz
100 kHz
(100/120) Hz/1 kHz
10 kHz
100 kHz
0.012 %
0.015 %
0.030 %
0.046 %
0.063 %
0.19 %
0.28 %
0.014 %
0.014 %
0.014 %
0.014 %
0.014 %
0.014 %
0.015 %
0.014 %
0.021 %
0.70 %
Agilent 16380A
capacitor set
Agilent 16380C
capacitor set
II. Electrical – RF/Microwave
Parameter/Range
Frequency
CMC
2, 7, 8, 9 (±)
Comments
Amplitude Modulation –
Measure
Rate: (10 to 50) Hz
Depths: (5 to 99) %
Rate: 50 Hz to 10 kHz
Depths: (5 to 99) %
Rate: (10 to 50) Hz
Depths: (5 to 99) %
100 kHz to 10 MHz
10 MHz to 3 GHz
1.8 %
0.87 %
1.2 %
R&S FSMR
Keysight E444X series
opt 233
R&S FSMR | 10 to 50 Hz |
| 22 | - | -Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 22 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
Amplitude Modulation –
Measure (cont)
Rate: (50 to 90) Hz
Depths: (5 to 20) %
Depths: (20 to 99) %
Rate: (90 to 150) Hz
Depths: (5 to 99) %
Rate: 150 Hz to 50 kHz
Depths: (5 to 20) %
Depths: (20 to 99) %
Rate: (50 to 100) kHz
Depths: (5 to 20) %
Rate: (50 to 100) kHz
Depths: (20 to 99) %
Rate: (10 to 90) Hz
Depths: (5 to 99) %
Rate: (90 to 150) Hz
Depths: (5 to 99) %
Rate: (150 to 50) Hz
Depths: (5 to 99) %
Rate: (50 to 100) kHz
Depths: (5 to 99) %
Bandwidth: ≤ 2 kHz
Depths:
(≥ 1 to 10) %
(≥ 10 to 20) %
(≥ 20 to 30) %
(≥ 30 to 40) %
(≥ 40 to 50) %
(≥ 50 to 60) %
(≥ 60 to 70) %
(≥ 70 to 80) %
(≥ 80 to 90) %
(≥ 90 to 99) %
10 MHz to 3 GHz
(3 to 50) GHz
3 Hz to 50 GHz
1.2 %
0.58 %
0.53 %
1.2 %
0.58 %
1.8 %
0.58 %
1.2 %
0.53 %
1.2 %
1.8 %
(0.085 to 0.19) %
(0.19 to 0.31) %
(0.31 to 0.41) %
(0.41 to 0.49) %
(0.49 to 0.55) %
(0.55 to 0.50) %
(0.50 to 0.40) %
(0.40 to 0.28) %
(0.28 to 0.15) %
(0.15 to 0.016) %
R&S FSMR
Keysight E444X series
opt 233
R&S FSMR
R&S FSMR
Keysight E444X series
opt 233
R&S FSMR
Keysight E444X series
opt 233
R&S FSMR
Keysight E444X series
N7800 TME method | 50 to 100 kHz |
| 23 | N7800 TME method | - | See scope document |
| 24 | - | -Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 24 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
Phase Modulation – Measure
Rate: 100 Hz to 100 kHz
Dev.: (0.3 to 0.7) Radians
peak
Rate: 100 Hz to 100 kHz
Dev.: (0.7 to 100) Radians
peak
100 kHz to 6.6 GHz
3.0 %
1.0 %
Keysight E444X series
option 233
Sine (Audio) Distortion –
Measure
(-80 to 0) dB
20 Hz to 250 kHz
1.0 dB
Keysight E444X series
option 233
RF Power – Generate
(-36 to 23.98) dBm
(10 to 14) dBm
(10 to 18) dBm
(10 to 19) dBm
(10 to 17) dBm
(10 to 13) dBm
(0 to 10) dBm
(0 to 9) dBm
(0 to 8) dBm
(-10 to 0) dBm
(-70 to -10) dBm
1 Hz to 10 MHz
(10 to 50) MHz
(15 to 60) MHz
(60 to 400) MHz
(0.4 to 3.2) GHz
(3.2 to 15) GHz
(15 to 30) GHz
250 kHz to 2 GHz
(2 to 20) GHz
(20 to 30) GHz
(30 to 65) GHz
(65 to 67) GHz
250 kHz to 2 GHz
(2 to 20) GHz
(20 to 65) GHz
(65 to 67) GHz
250 kHz to 2 GHz
(2 to 20) GHz
(20 to 40) GHz
(40 to 50) GHz
0.20 dB
0.30 dB
0.70 dB
0.92 dB
0.92 dB
0.92 dB
1.2 dB
0.69 dB
0.92 dB
1.0 dB
1.2 dB
1.5 dB
0.69 dB
0.92 dB
1.1 dB
1.2 dB
0.81 dB
1.1 dB
1.2 dB
1.7 dB
Keysight 33250A
Keysight E8257D | to 100000 Hz |
| 25 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 25 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
Level Sine – Generate
50 kHz to 10 MHz
Reference, V(p-p)
4.4 mV to 5 V
4.4 mV to 5 V
4.4 mV to 3 V
4.4 mV to 3 V
4.4 mV to 2 V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
(11 to 563) mV
(> 0.563 to 6.324) V
1 kHz to 300 MHz
(300 to 550) MHz
500 MHz to 1.1 GHz
(> 1.1 to 2.5) GHz
(> 2.5 to 3.2) GHz
(0.01 to 8.0) GHz
(0.01 to 8.0) GHz
(> 8 to 12.4) GHz
(> 8 to 12.4) GHz
(> 12.4 to 16) GHz
(> 12.4 to 16) GHz
(> 16 to 18) GHz
(> 16 to 18) GHz
(> 18 to 20) GHz
(> 18 to 20) GHz
(> 20 to 23) GHz
(> 20 to 23) GHz
(> 23 to 25) GHz
(> 23 to 25) GHz
(> 25 to 33) GHz
(> 25 to 33) GHz
(0.05 to 8.0) GHz
(0.05 to 8.0) GHz
(> 8 to 12.4) GHz
(> 8 to 12.4) GHz
(> 12.4 to 16) GHz
(> 12.4 to 16) GHz
(> 16 to 18) GHz
(> 16 to 18) GH
(> 18 to 20) GHz
(> 18 to 20) GHz
(> 20 to 23) GHz
(> 20 to 23) GHz
(> 23 to 25) GHz
(> 23 to 25) GHz
(> 25 to 33) GHz
(> 25 to 33) GHz
(> 33 to 40) GHz
(> 33 to 40) GHz
(> 40 to 45) GHz
(> 40 to 45) GHz
(> 45 to 50) GHz
(> 45 to 50) GHz
2.0 %
2.3 %
3.0 %
3.4 %
3.4 %
3.0 %
3.1 %
3.2 %
3.3 %
3.2 %
3.3 %
3.3 %
3.4 %
3.5 %
3.6 %
3.7 %
3.8 %
4.4 %
4.5 %
5.7 %
5.8 %
2.2 %
2.4 %
2.6 %
2.8 %
2.9 %
3.1 %
3.1 %
3.2 %
3.2 %
3.3 %
3.4 %
3.5 %
3.6 %
3.7 %
4.3 %
4.4 %
5.7 %
5.8 %
7.2 %
7.3 %
8.4 %
8.5 %
Fluke 9500B & 9530
active head – 50 Ω
Synthesized signal
generator, power
meter, N8485A,
11667C | ||
| 26 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 26 of 37
Parameter/Range
Frequency
CMC2, 8, 9 (±)
Comments
Phase Noise – Measurement
1 Hz to 1 MHz Offset
(1 to 100) MHz Offset
(100 to 160) MHz Offset
50 kHz to 40 GHz
50 kHz to 40 GHz
50 kHz to 40 GHz
2.3 dB
4.4 dB
5.4 dB
Keysight N5511A
RF Attenuation – Generate
1 dB
2 dB
3 dB
4 dB
5 dB
6 dB
7 dB
8 dB
9 dB
10 dB
11 dB
10 dB
20 dB
30 dB
40 dB
50 dB
60 dB
70 dB
80 dB
90 dB
100 dB
110 dB
10 dB
20 dB
30 dB
40 dB
50 dB
60 dB
70 dB
80 dB
90 dB
100 dB
110 dB
50 MHz
1 MHz
0.0024 dB
0.0024 dB
0.0024 dB
0.0025 dB
0.0025 dB
0.0025 dB
0.0025 dB
0.0025 dB
0.0025 dB
0.0025 dB
0.0025 dB
0.0036 dB
0.0040 dB
0.0070 dB
0.0070 dB
0.0090 dB
0.010 dB
0.015 dB
0.018 dB
0.021 dB
0.030 dB
0.037 dB
0.0037 dB
0.0041 dB
0.0071 dB
0.0071 dB
0.0091 dB
0.010 dB
0.015 dB
0.018 dB
0.021 dB
0.030 dB
0.037 dB
Keysight 8496 series
Keysight 8496 series | ||
| 27 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 27 of 37
Parameter/Range
Frequency
CMC2, 8, 9 (±)
Comments
Transmission S12/S21 –
Measure
50 Ω Type N:
(0 to 20) dB
(20 to 40) dB
(40 to 50) dB
50 Ω Type N:
(0 to 20) dB
(20 to 40) dB
(40 to 50) dB
50 Ω With 3.5 mm
Connectors:
(0 to 20) dB
(20 to 40) dB
(40 to 50) dB
50 Ω With 2.4 mm
Connectors:
(0 to 20) dB
(20 to 40) dB
(40 to 50) dB
9 kHz to 3 GHz
(2 to 18) GHz
10 MHz to 26.5 GHz
10 MHz to 50 GHz
Mag (0.029 to 0.061) dB
Phase (0.19 to 0.44)°
Mag (0.049 to 0.39) dB
Phase (0.32 to 2.6)°
Mag (0.095 to 1.2) dB
Phase (0.63 to 8.2)°
Mag (0.076 to 0.091) dB
Phase (0.50 to 0.61)°
Mag (0.091 to 0.12) dB
Phase (0.39 to 5.4)°
Mag (0.12 to 0.18) dB
Phase (0.79 to 1.2)°
Mag (0.031 to 0.11) dB
Phase (0.21 to 0.72)°
Mag (0.059 to 0.78) dB
Phase (0.39 to 5.4)°
Mag (0.11 to 2.5) dB
Phase (0.75 to 19)°
Mag (0.032 to 0.19) dB
Phase (0.21 to 1.3)°
Mag (0.062 to 0.78) dB
Phase (0.40 to 5.4)°
Mag (0.11 to 2.5) dB
Phase (0.75 to 19)°
Keysight
E5071C/85032F,
Type N
connectors
Keysight
N5245A/85054B,
Type N
connectors
Keysight
N5245A/85052B,
3.5 mm
connectors
Keysight
N5245A/85056A,
2.4 mm
connectors
Reflection S11/S22 –
Measure
50 Ω With Type N:
(0.0001 to 0.25) lin
(0.25 to 0.5) lin
(0.5 to 0.75) lin
(0.75 to 1) lin
9 kHz to 3 GHz
Lin Mag (0.0036 to 0.0052)
Phase (0.87 to 180)°
Lin Mag (0.0038 to 0.0061)
Phase (0.53 to 1.2)°
Lin Mag (0.0047 to 0.0082)
Phase (0.51 to 0.69)°
Lin Mag (0.0067 to 0.012)
Phase (0.51 to 0.68)°
Keysight
E5071C/85032F,
Type N
connectors | ||
| 28 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 28 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
Reflection S11/S22 –
Measure (cont)
50 Ω With Type N:
(0.0001 to 0.25) lin
(0.25 to 0.5) lin
(0.5 to 0.75) lin
(0.75 to 1) lin
50 Ω With 3.5 mm
Connectors:
(0.0001 to 0.25) lin
(0.25 to 0.5) lin
(0.5 to 0.75) lin
(0.75 to 1) lin
50 Ω With 2.4 mm
Connectors:
(0.0001 to 0.25) lin
(0.25 to 0.5) lin
(0.5 to 0.75) lin
(0.75 to 1) lin
(2 to 18) GHz
10 MHz to 26.5 GHz
10 MHz to 50 GHz
Lin Mag (0.0040 to 0.0083)
Phase (0.97 to 180)°
Lin Mag (0.0042 to 0.0061)
Phase (0.54 to 1.9)°
Lin Mag (0.0047 to 0.010)
Phase (0.44 to 1.2)°
Lin Mag (0.0047 to 0.016)
Phase (0.44 to 1.5)°
Lin Mag (0.0040 to 0.0068)
Phase (0.96 to 180)°
Lin Mag (0.0042 to 0.0098)
Phase (0.58 to 1.6)°
Lin Mag (0.0051 to 0.017)
Phase (0.55 to 1.3)°
Lin Mag (0.0075 to 0.029)
Phase (0.55 to 1.7)°
Lin Mag (0.0080 to 0.016)
Phase (1.9 to 180)°
Lin Mag (0.0081 to 0.018)
Phase (0.98 to 3.7)°
Lin Mag (0.0085 to 0.021)
Phase (0.74 to 1.7)°
Lin Mag (0.0093 to 0.033)
Phase (0.69 to 2.0)°
Keysight
E5071C/85032F,
Type N connectors
Keysight
N5245A/85054B,
type N connectors
Absolute RF Power –
Measure
1 mW
(20 to 30) dBm
50 MHz
9 kHz to 7 GHz
(7 to 18) GHz
(18 to 24) GHz
3.1 μW
3.3 %
3.4 %
3.6 %
Keysight
432A/478A/Fluke
8508A
Keysight EPM
power meter /
E9300 | ||
| 29 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 29 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
Absolute RF Power –
Measure (cont)
(10 to 20) dBm
(0 to 10) dBm
(-10 to 0) dBm
(-10 to 0) dBm
(9 to 100) kHz
(100 to 300) kHz
300 kHz to 7 GHz
(7 to 18) GHz
(18 to 26) GHz
(26 to 33) GHz
(33 to 34) GHz
(34 to 38) GHz
(38 to 43) GHz
(43 to 48) GHz
(48 to 50) GHz
(50 to 70) GHz
(9 to 100) kHz
(100 to 300) kHz
300 kHz to 4 MHz
4 MHz to 8 GHz
(8 to 16) GHz
(16 to 18) GHz
(18 to 26) GHz
(26 to 33) GHz
(33 to 38) GHz
(38 to 43) GHz
(43 to 48) GHz
(48 to 49) GHz
(49 to 50) GHz
(50 to 70) GHz
(9 to 100) kHz
(100 to 300) kHz
300 kHz to 4 GHz
(4 to 16) GHz
(16 to 18) GHz
(18 to 26) GHz
(26 to 33) GHz
(33 to 38) GHz
(38 to 43) GHz
(43 to 48) GHz
(48 to 49) GHz
(49 to 50) GHz
(50 to 70) GHz
2.4 %
1.5 %
1.4 %
1.6 %
2.0 %
2.2 %
2.3 %
2.5 %
2.9 %
3.0 %
3.3 %
4.0 %
2.4 %
1.2 %
1.1 %
1.2 %
1.3 %
1.5 %
1.9 %
2.1 %
2.4 %
2.8 %
2.9 %
3.0 %
3.3 %
3.9 %
2.9 %
1.2 %
1.1 %
1.3 %
1.5 %
1.9 %
2.1 %
2.4 %
2.8 %
2.9 %
3.0 %
3.3 %
3.9 %
Keysight EPM
power meter /
8480/N8480 &
E9300
Keysight EPM
power meter /
8480/N8480 &
E9300 series power
sensors | ||
| 30 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 30 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
Absolute RF Power –
Measure (cont)
(-20 to -10) dBm
(-30 to -20) dBm
(-40 to -30) dBm
(9 to 100) kHz
(100 to 300) kHz
300 kHz to 6 GHz
(6 to 15) GHz
(15 to 18) GHz
(18 to 26) GHz
(26 to 33) GHz
(33 to 35) GHz
(35 to 38) GHz
(38 to 40) GHz
(40 to 43) GHz
(43 to 48) GHz
(48 to 49) GHz
(49 to 50) GHz
(50 to 70) GHz
9 kHz to 5 GHz
(5 to 15) GHz
(15 to 18) GHz
(18 to 26) GHz
(26 to 33) GHz
(33 to 35) GHz
(35 to 38) GHz
(38 to 40) GHz
(40 to 43) GHz
(43 to 48) GHz
(48 to 49) GHz
(49 to 50) GHz
9 kHz to 10 MHz
(10 to 300) MHz
300 MHz to 15 GHz
(15 to 17) GHz
(17 to 18) GHz
(18 to 26) GHz
(26 to 31) GHz
(31 to 34) GHz
(34 to 38) GHz
(38 to 40) GHz
(40 to 49) GHz
(49 to 50) GHz
3.3 %
1.3 %
1.2 %
1.3 %
1.5 %
1.8 %
2.0 %
2.3 %
2.4 %
2.7 %
2.8 %
2.9 %
3.0 %
3.3 %
3.9 %
1.6 %
1.7 %
1.8 %
2.5 %
2.7 %
2.9 %
3.0 %
3.2 %
3.3 %
3.4 %
3.5 %
3.7 %
3.3 %
1.6 %
1.7 %
1.8 %
1.9 %
2.2 %
2.4 %
2.5 %
2.7 %
2.9 %
3.0 %
3.2 %
Keysight EPM power
meter / 8480/N8480 &
E9300 series power
sensors | ||
| 31 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 31 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
Absolute RF Power –
Measure (cont)
(-50 to -40) dBm
(-60 to -50) dBm
(-70 to -60) dBm
(9 to 100) kHz
100 kHz to 5 MHz
5 MHz to 3 GHz
(3 to 8) GHz
(8 to 16) GHz
(16 to 18) GHz
(18 to 26) GHz
(26 to 33) GHz
(33 to 34) GHz
(34 to 38) GHz
(38 to 44) GHz
(44 to 48) GHz
(48 to 49) GHz
(49 to 50) GHz
100 kHz to 10 MHz
10 MHz to 3 GHz
(3 to 7 ) GHz
(7 to 18) GHz
(18 to 26) GHz
(26 to 33) GHz
(33 to 38) GHz
(38 to 43) GHz
(43 to 48) GHz
(48 to 49) GHz
(49 to 50) GHz
100 kHz to 10 MHz
10 MHz to 3 GHz
(3 to 6) GHz
(6 to 16) GHz
(16 to 18) GHz
(18 to 26) GHz
(26 to 33) GHz
(33 to 34) GHz
(34 to 38) GHz
(38 to 43) GHz
(43 to 48) GHz
(48 to 49) GHz
(49 to 50) GHz
4.6 %
3.3 %
1.7 %
2.4 %
2.5 %
2.6 %
2.8 %
2.9 %
3.0 %
3.2 %
3.5 %
3.6 %
3.7 %
3.8 %
3.3 %
1.7 %
2.6 %
2.7 %
3.0 %
3.1 %
3.3 %
3.6 %
3.7 %
3.8 %
4.0 %
3.4 %
1.9 %
2.7 %
2.9 %
3.0 %
3.2 %
3.3 %
3.4 %
3.5 %
3.8 %
3.9 %
4.0 %
4.1 %
Keysight EPM
power meter /
8480/N8480 & E9300
series power sensors /
E444X series spectrum
analyzer | ||
| 32 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 32 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
Absolute RF Power –
Measure (cont)
(-80 to -70) dBm
(-90 to -80) dBm
(-100 to -90) dBm
(-110 to -100) dBm
(-120 to -110) dBm
100 kHz to 10 MHz
10 MHz to 3 GHz
(3 to 6) GHz
(6 to 18) GHz
(18 to 26) GHz
(26 to 33) GHz
(33 to 34) GHz
(34 to 38) GHz
(38 to 43) GHz
(43 to 48) GHz
(48 to 49) GHz
(49 to 50) GHz
100 kHz to 10 MHz
10 MHz to 3 GHz
(3 to 6) GHz
(6 to 15) GHz
(15 to 18) GHz
(18 to 28) GHz
(28 to 34) GHz
(34 to 35) GHz
(35 to 38) GHz
(38 to 43) GHz
(43 to 48) GHz
(48 to 49) GHz
(49 to 50) GHz
100 kHz to 10 MHz
10 MHz to 3 GHz
(3 to 6) GHz
(6 to 16) GHz
(16 to 18) GHz
100 kHz to 10 MHz
10 MHz to 3 GHz
(3 to 6) GHz
(6 to 16) GHz
(16 to 18) GHz
100 kHz to 10 MHz
10 MHz to 3 GHz
(3 to 6) GHz
3.5 %
2.0 %
2.9 %
3.2 %
3.4 %
3.5 %
3.6 %
3.7 %
4.0 %
4.1 %
4.2 %
4.4 %
3.6 %
2.2 %
3.1 %
3.4 %
3.5 %
3.7 %
3.8 %
3.9 %
4.0 %
4.2 %
4.3 %
4.4 %
4.6 %
3.7 %
2.4 %
3.3 %
3.7 %
3.8 %
3.8 %
2.6 %
3.6 %
4.0 %
4.1 %
4.0 %
2.8 %
3.9 %
Keysight EPM
power meter / 8480/N8480
& E9300 series power
sensors / E444X series
spectrum analyzer | ||
| 33 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 33 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
Absolute RF Power –
Measure (cont)
(-127 to -120) dBm
100 kHz to 10 MHz
10 MHz to 3 GHz
(3 to 6) GHz
4.1 %
3.0 %
4.2 %
Keysight EPM
power meter /
8480/N8480 &
E9300 Series
power sensors /
E444X series
spectrum analyzer
Relative RF Peak Power
Comparison –
(-15 to 15) dBm
1 MHz to 26.5 GHz
(26.5 to 50) GHz
0.024 dB
0.040 dB
Keysight
86100A/83484A
Network Analyzer
Dynamic Accuracy
(-60 to 5) dBm,
Reference -20 dBm
(-19 to 5) dBm
(-21 to -60) dBm
0.020 % + 0.0034 % /dB
step up from reference
0.020 % + 0.0034 % /dB
step down from reference
Keysight
E8257D/EPM
power
Meter/8480/N8480
series sensor &
U3020AD01 test
set
Pulse & Pulse Modulation –
Measure
5
Rise/Fall
Width/Time Interval
(10 to 90) % Pulse or
Pulse Envelope
(0.1 to 1) ns
(1 to 100) µs
0.14 % + 9.0 ps
0.18 % + 9.0 ps
0.12 % + 9.0 ps
Keysight 86100A,
83484A | ||
| 34 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 34 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
RF Power Sensor –
Calibration Factor
Linearity:
(16 to 20) dBm
(10 to 16) dBm
(-39 to 10) dBm
(-48 to -39) dBm
(10 to 20) dBm
(0 to 10) dBm
(-10 to 0) dBm
(-30 to -10) dBm
(-40 to -30) dBm
(-45 to -40) dBm
(-47 to -45) dBm
-47 dBm
-48 dBm
-49 dBm
-50 dBm
-51 dBm
-52 dBm
-53 dBm
-54 dBm
-55 dBm
-56 dBm
-57 dBm
-58 dBm
-59 dBm
-60 dBm
(6 to 300) kHz
(> 0.3 to 100) MHz
(> 0.100 to 5) GHz
(> 5 to 15) GHz
(> 15 to 18) GHz
(> 18 to 26.5) GHz
(> 26.5 to 34) GHz
(> 34 to 38) GHz
(> 38 to 43) GHz
(> 43 to 48) GHz
(> 48 to 49) GHz
(> 49 to 50) GHz
10 Hz to 128 MHz
9 kHz to 110 GHz
0.86 %
0.81 %
0.87 %
1.0 %
0.99 %
2.5 %
2.7 %
3.0 %
3.3 %
3.8 %
4.2 %
4.6 %
1.8 %
1.3 %
0.96 %
1.4 %
0.17 %
0.10 %
0.11 %
0.17 %
0.22 %
0.24 %
0.25 %
0.26 %
0.28 %
0.30 %
0.41 %
0.44 %
0.49 %
0.56 %
0.65 %
0.77 %
0.94 %
1.2 %
1.5 %
1.8 %
2.3 %
TEGAM 2505A
TEGAM 2510A
TEGAM 1830A
Fluke 96270A
Keysight 8494H /
8496H /
E4412A/E4413A
Keysight 8494H /
8496H /
8481D/8485D/8487
D | ||
| 35 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 35 of 37
Parameter/Range
Frequency
CMC2, 7, 8, 9 (±)
Comments
RF Power Sensor –
(cont)
Linearity:
-61 dBm
-62 dBm
-63 dBm
-64 dBm
-65 dBm
-66 dBm
-67 dBm
-68 dBm
-69 dBm
-70 dBm
9 kHz to 110 GHz
2.8 %
3.5 %
4.4 %
5.5 %
6.9 %
8.7 %
11 %
14 %
18 %
22 %
Keysight 8494H /
8496H /
8481D/8485D/8487
D
Parameter/Equipment
Range
CMC2, 6, 7, 8, 9 (±)
Comments
Digital Modulation – Measure
Carrier: 2 MHz to 50 GHz
Error Vector Magnitude for
Modulation Types: MSK,
GMSK, BPSK, DQPSK,
n/4DQPSK, 8PSK, 16QAM
& 32QAM & QPSK
Phase Error for Modulation
Types: MSK, GMSK,
BPSK, DQPSK,
n/4DQPSK, 8PSK, 16QAM
& 32QAM & QPSK
Error Vector Magnitude for
FSK Modulation
Mod Frequency Span:
1 Hz to 100 kHz
(0.1 to 1) MHz
1 MHz to 2.65 GHz
Mod Frequency Span:
1 Hz to 100 kHz
(0.1 to 1) MHz
1 MHz to 2.65 GHz
Mod Frequency:
3.2 kHz
1.152 MHz
0.37 % rms
0.59 % rms
1.2 % rms
0.20° rms
0.40° rms
0.66° rms
0.59 % rms
1.8 % rms
Keysight 89441A | ||
| 36 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 36 of 37
III. Time & Frequency
Parameter/Equipment
Range
CMC2, 10 (±)
Comments
Frequency – Measuring
Equipment
10 Hz to 15 MHz
250 kHz to 67 GHz
2.7 pHz/Hz
2.7 pHz/Hz
Keysight 33120A
phase locked to
Fluke 910
Keysight E8257D
phase locked to
Fluke 910
Frequency – Measure
10 Hz to 12.4 GHz
(12.4 to 26.5) GHz
(26.5 to 46) GHz
120 pHz/Hz
1.6 Hz
2.0 Hz
Fluke 910, Agilent
53132A phase
locked
Keysight 53151A
phase locked
Keysight 53152A
phase locked
___________________________________________
1 This laboratory offers commercial calibration service.
2 Calibration and Measurement Capability uncertainty (CMC) is the smallest uncertainty of measurement
that a laboratory can achieve within its scope of accreditation when performing more or less routine
calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent
expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage
factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory
may be greater than the CMC due to the behavior of the customer’s device and to influences from the
circumstances of the specific calibration.
3 Based on using the Fluke 8508A at the temperatur e (TCal) it was calibrated ± 5 °C, 4 Hr. warm up,
maximum resolution and an input zero or offset null performed if temp moves more than ± 1 °C from
temperature at which previous input zero or null was performed. Calibration and Measurement Capability
is based upon 1-year specifications and is read as parts in 10 6 or percent of reading plus parts in 10 6 or
percent of range. TCal = 23 °C +/- 5 °C (73.4 °F ± 9 °F).
4 Based on using the Fluke 5790A/B at the temperature (TCal) it was calibrated ± 5 °C with 30 minutes
warm up. Calibration and Measurement Capability is based upon 1-year specifications and is read as parts
in 106 or percent of reading plus fixed amount. TCal = 23 °C +/- 5 °C (73.4 °F ± 9 °F).
5 Transition time characteristic calculated from T = 0.35 / Bandwidth (26.5 GHz).
6 In the statement of CMC, “rms” refers to root mean square.
7 In the statement of CMC, percentages are percen tages of reading, unless otherwise indicated. In the
statement of CMC, W is defined as the watt reading. | ||
| 37 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2681.01) 04/29/2024 Page 37 of 37
8 The contributions from the “best existing device” are not included in the CMC claim.
9 The stated measured values are determined usi ng the indicated instrument (see Comments). This
capability is suitable for the calibration of the devices intended to measure or generate the measured value
in the ranges indicated. CMCs are expressed as either a specific value that covers the full range or as a
fraction/percentage of the reading plus a fixed floor specification.
10 The type of instrument or material being calibra ted is defined by the parameter. This indicates the
laboratory is capable of calibrating instruments that measure or generate the values in the ranges indicated
for the listed measurement parameter.
11 This scope meets A2LA’s P112 Flexible Scope Policy. | ||
| 38 | ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1994; ANSI/NCSL Z540.3-2006; R205 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
P.O. Box 619260, 1830 West Airfield Drive, DFW Airport, TX, 75261, US
32.89652, -97.04652
Open in MapsLabs with overlapping accredited scope in United States
- Recal Calibration ServicesEuless, TX · ~7 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Tektronix, Inc - IrvingIrving, TX · ~12 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Trescal, Inc. - Dallas, TXIrving, TX · ~12 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Kimball ElectronicArlington, TX · ~19 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Technical Maintenance, Inc. - DallasDallas, TX · ~27 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.