FindTestingLabs
Registers refreshed 2026-10-25.See refresh dates
United Kingdom

Anchem Laboratories Ltd

Unit 5 A, D'Arcy Business Park, D'Arcy Way, Llandarcy, Neath, SA10 6EJ, West Glamorgan, United Kingdom

UKAS 0934ISO/IEC 17025Register refreshed 2026-10-23
Request a quoteFree

We check which accredited labs can do it, starting with this one, and send you a short comparison within three working days: who can do it, how fast, and roughly at what cost.

  • No lab gets your contact details until you tell us which ones you want to hear from.
Accredited standards
10
UKAS certificate
1
Site in our directory
1
UKAS accredited scope

What this lab is accredited for

Our reading of the UKAS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 10 standard numbers and the 10 official names we hold. When no standard matches, it searches the method text of every scope line.

EN 1911Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method
EN 12619Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
EN 13284-1Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 14789Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
EN 14790Stationary source emissions - Determination of the water vapour in ducts - Standard reference method
EN 14791Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
EN 14792Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescence
EN 15259Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
ISO 16911-1Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method
ISO 21877Stationary source emissions— Determination of the mass concentration of ammonia - Manual method

Read from the scope as published by UKAS. Register refreshed 2026-10-23.

Scope as published by UKAS

5 lines
UKAS

ISO/IEC 17025

Active

0934

View scope

Accredited scope, certificate 0934

LineMethodMatrixRange
1ISO/IEC 17025:2017--
2BS EN 13284-1:2017; ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2; IEC 17025; In-House Method ANC/AS/2; In-House Method ANC/AS/10Ambient air-
3BS EN ISO 21877:2019; BS EN 15259:2007 Total Particulate Matter BS EN 13284-1:2017; BS EN 1911:2010; BS EN 14791:2017; BS EN BS EN ISO 21877:2019Metal-
4BS EN ISO 16911-1:2013; BS EN 15259:2007 Hydrogen Sulphide USEPA Method 11; BS EN 14790:2017; BS EN 12619:2013; BS EN 14789:2017Water0 to 1000 mg/m³
5BS EN 15259:2007; BS EN 14792:2017; ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2; IEC 17025Stack emissions to atmosphere-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Unit 5 A, D'Arcy Business Park, D'Arcy Way, Llandarcy, Neath, West Glamorgan, SA10 6EJ, GB

51.58333, -3.75000

Open in Maps
← All accredited testing labs in United Kingdom

Labs with overlapping accredited scope in United Kingdom

Accreditation data refreshed from the UKAS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the UKAS entry linked above.