Registers refreshed 2026-11-08.See refresh dates
Italy

Laboratori di Prova - Acciaierie d'Italia S.p.A. in Amministrazione Straordinaria - Stabilimento di Taranto

Via Appia km. 648, 74123, Taranto, Italy

ACCREDIA 00037ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
50
ACCREDIA certificate
1
Site in our directory
1
ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 50 standard numbers and the 30 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO17
ISO 567Coke - Determination of bulk density in a small container
ISO 579Coke - Determination of total moisture
ISO 589Hard coal - Determination of total moistureSome methods

Limits written next to it

ISO 589:2008 - solo/only Met.

Some methods. Written next to it on line 3 of ACCREDIA certificate 00037.

ISO 3087Iron ores - Determination of the moisture content of a lot
ISO 6976Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition
ISO 9377-2Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography
ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 10523Water quality - Determination of pH
ISO 11885Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 12846Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment
ISO 13605Solid mineral fuels - Major and minor elements in coal ash and coke ash - Wavelength dispersive x-ray fluorescence spectrometric method
ISO 15350Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)
Show all 17
ISO 15705Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
ISO 16703Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
ISO 17294-2Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
ISO 23499Coal - Determination of bulk density of coal as it is handled in industrial practices
ISO 29541Coal and coke - Determination of total carbon, hydrogen and nitrogen - Instrumental method
EN14
EN 12457-2Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
EN 12485Some materials

Limits written next to it

UNI EN 12485:2017 - solo/only cap

Some materials. Written next to it on line 3 of ACCREDIA certificate 00037.

EN 13137Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sedimentsSome methods

Limits written next to it

UNI EN 13137:2002 - solo/only Met A

Some methods. Written next to it on line 4 of ACCREDIA certificate 00037.

UNI EN 13137:2002 - solo/only Met A Spettrofotometria IR

Some methods. Written next to it on line 4 of ACCREDIA certificate 00037.

EN 13657Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements
EN 14039Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography
EN 14346Characterization of waste - Calculation of dry matter by determination of dry residue or water content
EN 14902
EN 15549
EN 15841
EN 15934Sludge, treated biowaste, soil and waste - Calculation of dry matter fraction after determination of dry residue or water content
EN 15936Soil, waste, treated biowaste and sludge - Determination of total organic carbon (TOC) by dry combustionSome methods

Limits written next to it

UNI EN 15936:2022 - solo/only Met.

Some methods. Written next to it on line 4 of ACCREDIA certificate 00037.

UNI EN 15936:2022 - solo/only Met. A

Some methods. Written next to it on line 4 of ACCREDIA certificate 00037.

EN 15984
EN 16192
EN 27888Water quality - Determination of electrical conductivity
ASTM10
ASTM C25Some clauses

Limits written next to it

ASTM C25-24 - solo/only sez 19

Some clauses. Written next to it on line 3 of ACCREDIA certificate 00037.

ASTM C1271
ASTM D95
ASTM D1552
ASTM D4239
ASTM D4809
ASTM D5057
ASTM D5291
ASTM D5373
ASTM D5865
EPA8
EPA 3060
EPA 3545
EPA 5021Volatile Organic Compounds (VOCs) in Various Sample Matrices Using Equilibrium Headspace Analysis
EPA 5030Purge-and-Trap for Aqueous Samples
EPA 7199
EPA 8015Nonhalogenated Organics by Gas Chromatography
EPA 8260Volatile Organic Compounds by Gas Chromatography/Mass Spectrometry
EPA 8270Semivolatile Organic Compounds by Gas Chromatography/Mass Spectrometry (GC/MS)
Other standards1
APAT CNR IRSA 4050 Man 29 2003

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

8 lines
ACCREDIA

ISO/IEC 17025

Active

00037

View scope

Accredited scope, certificate 00037

LineMethodMatrixRange
1UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 15350:2010; UNI EN ISO 15350:2010 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; APHA Standard Methods for Examination of Water and Wastewater 4500-NH3 H (2021); UNI EN 27888:1995; ISO 10523:2008Drinking water0.005 to 4.8 % (m/m)
2UNI CEI EN ISO/IEC 17025:2018; APAT CNR IRSA 4050 Man 29 2003; EPA 7199 1996; ISO 15705:2002; UNI EN ISO 9377-2:2002; APAT CNR IRSA 4070 Man 29 2003; UNI EN ISO 12846:2013; UNI EN ISO 10304-1:2009; EPA 5030C 2003; EPA 8260D 2018Waste waterSee scope document
3UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 17294-2:2023; ASTM C25-24; UNI EN 12485:2017; ASTM C1271-99(2020); ASTM D5373-21; ISO 23499:2013; ASTM D4239-18e1 + ASTM D5865/D5865M-19 + ASTM D5373-21 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; ASTM D5373-21 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; ISO 589:2008; ISO 29541:2025; ISO 13605:2018; ASTM D5865/D5865M-19; ASTM D4239-18e1; ISO 567:2021; ASTM D4239-18e1 + ISO 29541:2025 + ASTM D5865/D5865M-19 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; ISO 29541:2025 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; ISO 579:2013Alluminio/Aluminium, Antimonio/Antimony, Arsenico/Arsenic, Bario/Barium, Berillio/Beryllium, Boro/Boron, Cadmio/Cadmium, Calcio/Calcium, Cobalto/Cobalt, Cromo/Chromium, Ferro/Iron, Magnesio/Magnesium, Manganese/Manganese, Mercurio/Mercury, Molibdeno/Molybdenum, Nichel/Nickel, Piombo/Lead, Potassio/Potassium, Rame/Copper, Selenio/Selenium, Sodio/Sodium, Stagno/Tin, Tallio/Thallium, Vanadio/Vanadium, Zinco/Zinc; Calcare/Limestone, Calce idrata/Hydrated Lime, Calce/Quicklime; Carbone/Coal; Carbone/Coal, Coke/Coke; Coke/Coke; Combustibili idrocarburici liquidi/Liquid hydrocarbon fuelsSee scope document
4UNI CEI EN ISO/IEC 17025:2018; UNI EN 14039:2005; UNI EN 14346:2007 Met A; UNI EN 13657:2004; UNI EN ISO 17294-2:2023; UNI EN ISO 11885:2009; ASTM D5057-17; UNI EN 15934:2012; UNI EN 15936:2022 - solo/only Met. A; UNI EN 13137:2002 - solo/only Met A; EPA 5021A 2014; EPA 8015C 2007; EPA 5021A 2014 + EPA 8015C 2007 + UNI EN 14039:2005; CNR IRSA 1 Q 64 Vol 3 1985 + APAT CNR IRSA 2060 Man 29 2003SoilSee scope document
5UNI CEI EN ISO/IEC 17025:2018; UNI EN 12457-2:2004; UNI EN 16192:2012; UNI EN ISO 10523:2012; ISO 15705:2002; EPA 5021A 2014; EPA 8260D 2018; EPA 3060A 1996; EPA 7199 1996; UNI EN ISO 11885:2009SoilSee scope document
6UNI CEI EN ISO/IEC 17025:2018; UNI EN 15984:2022 + UNI EN ISO 6976:2017 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; UNI EN 15984:2022 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; ISO 3087:2020; ASTM D95-23e1; ASTM D5291-21; ASTM D1552-23 + ASTM D5291-21 + ASTM D4809-18 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; ASTM D5291-21 + Reg UE 2066/2018 19/12/2018 GU UE L334 31/12/2018; ASTM D1552-23; EPA 3545A 2007, EPA 8270E 2018Minerali di ferro/Iron ores, Minerali fondenti per altoforno (1)/Fluxing minerals for blast furnace; Prodotti petroliferi/Petroleum products; Rifiuti/Wastes, Terreni/Soils0.1 to 15 [%]
7UNI CEI EN ISO/IEC 17025:2018; EPA 3545A 2007; EPA 8270E 2018; DM 13/09/1999 SO n 185 GU n 248 21/10/1999 Met II.1; MU 2238:09SoilSee scope document
8UNI EN 15841:2010; ISO 16703:2004; UNI CEN/TS 16645:2014; UNI EN 15549:2008; UNI EN 14902:2005/EC1:2008; UNI CEI EN ISO/IEC 17025:2018SoilSee scope document

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Via Appia km. 648, Taranto, 74123, IT

40.54882, 17.08058

Open in Maps
← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.