United States

Covestro

1 Covestro Circle, Building 8, 15205, Pittsburgh, PA, United States

A2LA 197.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 60
A2LA certificate: 1
Site in our directory: 1

A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 60 standard numbers and the 28 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM39

ASTM C518

ASTM D256

ASTM D395

ASTM D412

ASTM D523Standard Test Method for Specular Gloss

ASTM D573

ASTM D575

ASTM D618

ASTM D624

ASTM D638Standard Test Method for Tensile Properties of Plastics

ASTM D648

ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

Show all 39

ASTM D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

ASTM D1003

ASTM D1004

ASTM D1238

ASTM D1525

ASTM D1621Standard Test Method for Compressive Properties of Rigid Cellular Plastics

ASTM D1622

ASTM D1623

ASTM D2126Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness

ASTM D2244

ASTM D2565

ASTM D2584

ASTM D3045

ASTM D3489Exclusion

Limits written next to it

Urethane Properties ASTM D3489 (Except Parts 13, 14, 15, 17, 18, 22, 23),

Exclusion. Written next to it on line 3 of A2LA certificate 197.01.

ASTM D3574Standard Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Polyurethane Foams

ASTM D3763

ASTM D4329

ASTM D4459

ASTM D4587

ASTM D4986

ASTM D5630

ASTM D5894

ASTM D6695

ASTM E313

ASTM G154

ASTM G155

ISO21

ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces

ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties

ISO 62Plastics - Determination of water absorption

ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method

ISO 178Plastics - Determination of flexural properties

ISO 179-2Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test

ISO 291Plastics - Standard atmospheres for conditioning and testing

ISO 306Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

ISO 527-1Plastics - Determination of tensile properties - Part 1: General principlesExclusion

Limits written next to it

ISO 527-1 (Except Part 10.4), -2

Exclusion. Written next to it on line 3 of A2LA certificate 197.01.

ISO 845Cellular plastics and rubbers - Determination of apparent density

ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

Show all 21

ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method

ISO 1798Flexible cellular polymeric materials - Determination of tensile strength and elongation at break

ISO 1856Flexible cellular polymeric materials - Determination of compression set

ISO 3386

ISO 3451-1Plastics - Determination of ash - Part 1: General methods

ISO 3795Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials

ISO 6603-2Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing

ISO 8067Flexible cellular polymeric materials - Determination of tear strength

ISO 9772Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

4 lines

A2LA

ISO/IEC 17025

Active

197.01

The scope document we hold says it is valid until 2027-05-31.

View scope

Accredited scope, certificate 197.01

Line	Method	Matrix	Range
1	ASTM D2565; ASTM D4329; ASTM D4459; ASTM D4587; ASTM D6695; ASTM G154; ASTM G155; SAE J2020; SAE J2412; SAE J2527; ASTM D1622; ASTM D2584; ASTM D3489; ASTM D5630; ISO 3451-1; ASTM D3574; ASTM D2244; ASTM D575; ASTM D1621; ASTM D3489; ASTM D3574; ASTM D395; ISO 1856A; ISO 3386; ASTM D618; ISO 291	plastics and rubbers	-
2	ASTM D3574 (Test A); ASTM D3489 (Part 7); ISO 845; ASTM D3489 (Part 16); D3574 (Tests K and L); ASTM D2240; D3489 (Part 10); ISO 868; ASTM D4986; D5132; Calf. T.B. 117:2013, Section 3; FMVSS 302; ISO 3795; ISO 9772; SAE J369; UL 94 (Except Section 10); GMW3232; GB8410; ASTM D790; D3489 (Part 20); ISO 178; ASTM D1238 (Methods A and B); ISO 1133-1; -2; ASTM D523; ASTM D1003 (Method A); ASTM D3045; ASTM D2126; D3574 (Test L); ASTM D648 (Method B); ISO 75-1; -2; ASTM D3763; ISO 6603-2; ASTM D3574 (Tests B1 and B2); ASTM D256; D4812; ISO 179-2 (Methods 1eA and 1eU); 180; ASTM D573; ASTM D5894; ASTM D792 (Method A); ISO 1183-1 (Method A); ASTM D3574 (Test J)	-	-
3	ASTM D624; ASTM D1004; ASTM D3489; ASTM D3574; ISO 34-1; ISO 8067; ASTM D1623; ASTM D638; ISO 527-1; ISO 1798; ASTM D412; ISO 37; ASTM C518; ASTM D1525; ISO 306; ISO 62; ASTM E313	-	-
4	Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation. Accredited Laboratory A2LA has accredited COVESTRO LLC Pittsburgh, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 30th day of May 2025. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 0197.01 Valid to May 31, 2027

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

1 Covestro Circle, Building 8, Pittsburgh, PA, 15205, US

40.44142, -80.00390

Open in Maps

← All accredited testing labs in Pennsylvania

← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.