Registers refreshed 2026-11-08.See refresh dates
Germany

Materialprüfung Südwest, Heinrich Mühe Thorsten Schiffer GbR

Landkommissärstraße 12, 76829, Landau in der Pfalz, Germany

DAKKS D-PL-20266-01-00ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
18
DAKKS certificate
1
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 18 standard numbers and the 14 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO8
ISO 3452-1Non-destructive testing - Penetrant testing - Part 1: General principles
ISO 5579Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
ISO 9934-1Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 16809Non-destructive testing - Ultrasonic thickness determination
ISO 16810Non-destructive testing - Ultrasonic testing - General principles
ISO 17636-1Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film
ISO 17638Non-destructive testing of welds - Magnetic particle testing
ISO 17640Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
EN7
EN 1369Founding - Magnetic particle testing
EN 1371-1Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings
EN 10160Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method)
EN 12681-1
EN 12732
EN 13445-5
EN 13480-5
EN 10228 series3
EN 10228-1Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10228-2Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10228-3Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

3 lines
DAKKS

ISO/IEC 17025

Active

D-PL-20266-01-00

View scope

Accredited scope, certificate D-PL-20266-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018; DIN EN ISO 5579; DIN EN ISO 17636-1Metal-
2DIN EN 12681-1; DIN EN ISO 16810; DIN EN ISO 17640; DIN EN 10228-3; DIN EN ISO 16809; DIN EN 10160; DIN EN ISO 9934-1; DIN EN ISO 17638; DIN EN 1369; DIN EN 10228-1; DIN EN 1371-1Schmiedestücken aus Stahl; Flacherzeugnissen aus Stahl; Schweißverbindungen; Sand-, Schwerkraftkokillen- und Niederdruckkokillengussstücke-
3DIN EN ISO 3452-1; DIN EN 10228-2; AD 2000-Merkblatt HP 5/3; DVGW GW 350; AGFW FW 446; DIN EN 12732; DIN EN 13480-5; DIN EN 13445-5--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Landkommissärstraße 12, Landau in der Pfalz, 76829, DE

49.20145, 8.16447

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.