Registers refreshed 2026-11-08.See refresh dates
United States

ATI Flat Rolled Products

1300 Pacific Ave., 15065, Natrona Heights, PA, United States

Visit website
A2LA 3109.01A2LA 3109.02ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
30
A2LA certificates
2
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 30 standard numbers and the 22 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM22
ASTM A262Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
ASTM A923Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM B117Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM E8Standard Test Methods for Tension Testing of Metallic Materials
ASTM E10Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E45Standard Test Methods for Determining the Inclusion Content of Steel
ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM E112Standard Test Methods for Determining Average Grain Size
ASTM E139
ASTM E290Standard Test Methods for Bend Testing of Material for Ductility
Show all 22
ASTM E340Standard Practice for Macroetching Metals and Alloys
ASTM E384Standard Test Method for Microindentation Hardness of Materials
ASTM E572
ASTM E1019Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Combustion and Inert Gas Fusion Techniques
ASTM E1086Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
ASTM E1184
ASTM E1479
ASTM E2465
ASTM G28
ASTM G30
ISO7
ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
ISO 4287Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
ISO 4967Steel - Determination of the non-metallic inclusion content - Micrographic method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 7438Metallic materials - Bend test
ISO 20482Metallic materials - Sheet and strip - Erichsen cupping test
Other standards1
EN 2003-9

Read from the A2LA scope documents we downloaded on 2025-12-02 and 2026-10-27. Register refreshed 2026-11-06.

Scope as published by A2LA

6 lines
A2LA

ISO/IEC 17025

Active

3109.01

The scope document we hold says it is valid until 2027-01-31.

View scope

Accredited scope, certificate 3109.01

LineMethodMatrixRange
1ASTM E290; ISO 7438; ASTM E10; ASTM E18; ASTM E112; ASTM E45; ISO 4967; IGA/M22; ASTM E340; ASTM E92; ASTM E384; ASTM A923; A1084; G48; ASTM B117; ASTM G30armor, stainless steel, nickel-base, cobalt-base and titanium sheet, strip and plate products-
2ASTM G28 Method A; ASTM G28 Method B; ASTM A262 Practices A; ASTM A262 Practices B; ASTM A262 Practices C; ASTM A262 Practices E; ISO 3651-1; ISO 3651-2 Method A; SEP 1877; ASTM E139; ASTM E8/E8M; EN-ISO 6892-1; AMS 2750; ASME B46.1 Section 3; ISO 4287; EN-ISO 20482; Int. Procedure: “Alpha Case”; EN 2003-9; ASTM E21--
3ISO/IEC 17025:2017FLAT ROLLED PRODUCTS-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

A2LA

ISO/IEC 17025

Active

3109.02

The scope document we hold says it is valid until 2027-01-31.

View scope

Accredited scope, certificate 3109.02

LineMethodMatrixRange
1ASTM E1479; ASTM E1184; ASTM E1086; ASTM E572; ASTM E2465Steel-
2ASTM E1086; ASTM E572; ASTM E2465; ASTM E1019Stainless Steels; Nickel Alloys-
3ISO/IEC 17025:2017; ISO-ILAC-IAF Communiqué dated April 2017; IEC 17025--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

1300 Pacific Ave., Natrona Heights, PA, 15065, US

40.61423, -79.73604

Open in Maps
← All accredited testing labs in Pennsylvania
← All accredited testing labs in United States

Labs with overlapping accredited scope in United States

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.