Registers refreshed 2026-11-08.See refresh dates
Poland

Lubelska Agencja Ochrony Środowiska

ul. Kuźnicza 15, 21-045, Świdnik, Poland

PCA AB 1183ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
44
PCA certificate
1
Site in our directory
1
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 44 standard numbers and the 34 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO24
ISO 5349-1Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements
ISO 5349-2Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace
ISO 5664Water quality - Determination of ammonium - Distillation and titration method
ISO 5667-10Water quality - Sampling - Part 10: Guidance on sampling of waste water
ISO 5815-1Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition
ISO 6060Water quality - Determination of the chemical oxygen demand
ISO 6332Water quality - Determination of iron - Spectrometric method using 1,10-phenanthroline
ISO 6878Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method
ISO 7150-1Water quality - Determination of ammonium - Part 1: Manual spectrometric method
ISO 7243Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index
ISO 7730Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ISO 8288Water quality - Determination of cobalt, nickel, copper, zinc, cadmium and lead - Flame atomic absorption spectrometric methods

Certificate says ISO 8288:2002, ISO 8288:2002 metoda A. Probably the same standard; not checked against the EN document.

Show all 24
ISO 9280Water quality - Determination of sulfate - Gravimetric method using barium chloride
ISO 9297Water quality - Determination of chloride - Silver nitrate titration with chromate indicator (Mohr's method)
ISO 9377-2Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography
ISO 9612Acoustics - Determination of occupational noise exposure - Methodology
ISO 10381-5Soil quality - Sampling - Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination
ISO 10390Soil, treated biowaste and sludge - Determination of pH
ISO 10523Water quality - Determination of pH
ISO 11047Soil quality - Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc - Flame and electrothermal atomic absorption spectrometric methods
ISO 11079Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects
ISO 11465Sludge and solid environmental matrices - Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis
ISO 12846Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment
ISO 16772Soil quality - Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry
EN10
EN 872Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
EN 903Water quality. Determination of anionic surfactants by measurement of the methylene blue index MBAS
EN 1233Water quality - Determination of chromium - Atomic absorption spectrometric methods
EN 1899-2Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples
EN 14253Mechanical vibration - Measurement and evaluation of occupational exposure to whole-body vibration with reference to health - Practical guidance

Certificate says EN 14253+A1:2011. Probably the same standard; not checked against the EN document.

EN 14255-1
EN 14255-2
EN 25663Water quality - Determination of Kjeldahl nitrogen - Method after mineralization with selenium
EN 25813Water quality - Determination of dissolved oxygen - Iodometric method
EN 26777Water quality - Determination of nitrite - Molecular absorption spectrometric method
Other standards10
PN-N-01307:1994Hałas - Dopuszczalne wartości hałasu w środowisku pracy - Wymagania dotyczące wykonywania pomiarów
PN-R-04031
PN-T-05687
PN-Z-04008-7:2002
PN-Z-04008-7:2002+Az1:2004
PN-Z-04009-11:2008
PN-Z-04469
PN-Z-04472
PN-Z-04507:2022-05Ochrona czystości powietrza - Oznaczanie frakcji wdychalnej aerozolu na stanowiskach pracy metodą grawimetryczną
PN-Z-04508:2022-05

Read from the PCA scope document we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

10 lines
PCA

ISO/IEC 17025

Active

AB 1183

The scope document we hold says it was valid until 2026-05-04. That date has passed, so our copy may be out of date. We downloaded it from the PCA register on 2026-03-13. Check the PCA register for the current scope.

View on PCA

Location

ul. Kuźnicza 15, Świdnik, 21-045, PL

51.21649, 22.69096

Open in Maps
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.