Registers refreshed 2026-11-08.See refresh dates
Italy

INNOVHUB - Stazioni Sperimentali per l'Industria Srl a socio unico

Via Giuseppe Colombo 83, 20133, Milano, Italy

Visit website
ACCREDIA 00083ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
40
ACCREDIA certificate
1
Site in our directory
1
ACCREDIA accredited scope

What this lab is accredited for

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 40 standard numbers and the 34 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO29
ISO 534Paper and board - Determination of thickness, density and specific volume
ISO 536Paper and board - Determination of grammage
ISO 660Animal and vegetable fats and oils - Determination of acid value and acidity
ISO 662Animal and vegetable fats and oils - Determination of moisture and volatile matter content
ISO 1762Paper, board, pulps and cellulose nanomaterials - Determination of residue (ash content) on ignition at 525 °C
ISO 2178Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
ISO 2360Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method
ISO 2409Paints and varnishes - Cross-cut test
ISO 2470-2Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 2: Outdoor daylight conditions (D65 brightness)
ISO 2471Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method
ISO 2808Paints and varnishes - Determination of film thickness
ISO 2811-1Paints and varnishes - Determination of density - Part 1: Pycnometer method
Show all 29
ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°
ISO 3231Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide
ISO 3251Paints, varnishes and plastics - Determination of non-volatile-matter content
ISO 4624Paints and varnishes - Pull-off test for adhesion
ISO 4892-2Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 4892-3Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
ISO 6270-1Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure)
ISO 6272-1Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 11092Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
ISO 11948-1Urine-absorbing aids - Part 1: Whole-product testing
ISO 12944-6Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods
ISO 12944-9Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
ISO 14680-2Paints and varnishes - Determination of pigment content - Part 2: Ashing method
ISO 16474-2Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 16474-3Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
ISO 18363-2Animal and vegetable fats and oils - Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS - Part 2: Method using slow alkaline transesterification and measurement for 2-MCPD, 3-MCPD and glycidol
ASTM5
ASTM B117Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM D610
ASTM D661
ASTM D714
ASTM D772
ISO 4628 series4
ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-4Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
ISO 4628-5Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
Other standards2
COI/T.20/Doc n 34/rev 1 2017
COI/T.20/Doc n 35/rev 1 2017

Read from the scope as published by ACCREDIA. Register refreshed 2026-11-06.

Scope as published by ACCREDIA

7 lines
ACCREDIA

ISO/IEC 17025

Active

00083

View scope

Accredited scope, certificate 00083

LineMethodMatrixRange
1ISO 11948-1:1996; DM 332 27/08/1999 GU n 227 27/09/1999 Met n° 003NMC93; DM 332 27/08/1999 GU n 227 27/09/1999 Met n° 002NMC93; DM 332 27/08/1999 GU n 227 27/09/1999 Met n° 001NMC93; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 5.3 + DM 18/06/1979 GU 180 03/07/1979; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 3a; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 3c; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 2; DM 21/03/1973 GU n° 104 20/04/1973 All IV sez 6 Met 1; UNI ISO 1762:2019; ISO 2470-2:2008; UNI EN ISO 536:2020; UNI ISO 2471:2009; UNI EN ISO 534:2012; UNI 24036:1993; UNI 24013:1993; UNI EN ISO 18363-2:2025; ISO 660:2020Ausili assorbenti l'urina; Urine-absorbing aids; Ausili per l'incontinenza; Assistive products for incontinence; Carta e cartone destinati a venire in contatto con gli alimenti; Paper and board intended to come into contact with foodstuffs; Carta; Paper; Cartone; Board; Detergenti; Detergents; Tensioattivi; Surface active agents; Grassi di origine animale; Animal fats; Grassi di origine vegetale; Vegetable fats; Oli di origine animale; Animal oils; Oli di origine vegetale; Vegetable oils-
2ISO 662:2016; NGD C72 - 89; NGD C71 - 89Sostanze volatili; Umidità; SteroliSee scope document
3UNI CEI EN ISO/IEC 17025:2018Grassi di origine animale/Animal fats; Grassi di origine vegetale/Vegetable fats; Oli di origine animale/Animal oils; Oli di origine vegetale/Vegetable oils-
4COI/T.20/Doc n 33/rev 1 2017; AOCS Cd 29b-13 2017; SAE J2412:2024; ASTM B117-26; UNI EN ISO 4628-2:2016; UNI EN ISO 4628-3:2025; UNI EN ISO 4628-4:2016; UNI EN ISO 4628-5:2023; UNI EN ISO 9227:2024Grassi di origine vegetale/Vegetable fats; Oli di origine vegetale/Vegetable oils; Olio di oliva e di sansa di oliva; Grassi/Fats; Oli per uso alimentare/Oils for food use; Materiali interni di veicoli/Vehicle interior materials; Materiali metallici e loro rivestimenti (organici ed inorganici)/Metallic materials and organic and inorganic coatingsSee scope document
5SAE J2527:2017; UNI EN ISO/CIE 11664-4:2019; UNI EN ISO 4892-2:2021; UNI EN ISO 4628-2:2016; UNI EN ISO 4628-3:2025; UNI EN ISO 4628-4:2016; UNI EN ISO 4892-3:2025; UNI EN ISO 4628-5:2023; COI/T.20/Doc n 29/rev 2 2022; COI/T.20/Doc n 34/rev 1 2017; COI/T.20/Doc n 19/rev 5 2019; COI/T.20/Doc n 28/rev 4 2024; COI/T.20/Doc n 20/rev 4 2017; COI/T.20/Doc n 26/rev 5 2020Materie plastiche/Plastics; Oli d'oliva/Olive oils; Oli di sansa/Olive pomace oils; Oli di oliva vergine/Virgin Olive oils-
6COI/T.20/Doc n 15/rev 11 2024; COI/T.20/Doc n 35/rev 1 2017; UNI EN ISO 2813:2016; ISO 14680-2:2000; UNI EN ISO 6272-1:2013; UNI EN ISO/CIE 11664-6:2023; ASTM D610-25; ASTM D661-93(2019); ASTM D772-24; ASTM D714-25; UNI EN ISO 16474-2:2023; UNI EN ISO 4628-2:2016; UNI EN ISO 4628-3:2025; UNI EN ISO 4628-4:2016; UNI EN ISO 4628-5:2023; UNI EN ISO 16474-3:2021; UNI EN ISO 3231:1999; UNI EN ISO 6270-1:2018; ISO 2409:2020; UNI EN ISO 4624:2023; UNI EN ISO 2808:2019; UNI EN ISO 2178:2016; UNI EN ISO 2360:2017Olio di oliva e di sansa di oliva; Pitture; Vernici0.1 to 30 meq O2/kg
7UNI EN ISO 4628-2:2016; UNI EN ISO 4628-3:2025; UNI EN ISO 4628-4:2016; UNI EN ISO 4628-5:2023; ISO 3251:2019; ISO 2811-1:2023; ISO 11092:2014; UNI EN ISO/CIE 11664-4:2019; UNI EN ISO 12944-6:2018; ISO 12944-9:2018; Reg CE 440/2008 30/05/2008 GU L142 31/05/2008 Met C.4-C; OECD Guideline for the testing of chemicals N. 301 1992 Met BPitture/Paints; Vernici/Varnishes; Prodotti tessili/Textiles; Tessuti/Fabrics; Prodotti verniciati/Painted products; Rivestimenti di pitture o vernici su acciaio/Coatings of paints or varnishes on steel0.5 to 2.5 g/cm3

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Via Giuseppe Colombo 83, Milano, 20133, IT

45.46419, 9.18963

Open in Maps
← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.