Teknor Apex Company
31 Fuller Street, 01453-4451, Leominster, MA, United States
- Accredited standards
- 27
- A2LA certificate
- 1
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 27 standard numbers and the 18 official names we hold. When no standard matches, it searches the method text of every scope line.
ASTM14
ASTM D395
ASTM D412
ASTM D471
ASTM D523Standard Test Method for Specular Gloss
ASTM D573
ASTM D618
ASTM D624
ASTM D638Standard Test Method for Tensile Properties of Plastics
ASTM D790Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D792Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D2240Standard Test Method for Rubber Property - Durometer Hardness
ASTM D2244
ASTM D6147
ASTM D7869
ISO10
ISO 34-1Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 105-A02Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour
ISO 178Plastics - Determination of flexural properties
ISO 188Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 815-1Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1817Rubber, vulcanized or thermoplastic - Determination of the effect of liquids
ISO 23529Rubber - General procedures for preparing and conditioning test pieces for physical test methods
ISO 527 series3
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO/IEC 17025:2017; ASTM D395; ASTM D412; ASTM D471; ASTM D523; ASTM D573; ASTM D618; ASTM D624; ASTM D638; ASTM D790; ASTM D792; ASTM D2240; ASTM D2244
ASTM D6147; ISO 34-1; ISO 37; ISO 105-A02; ISO 178; ISO 188; ISO 527-1; ISO 527-2; ISO 527-3; ISO 815-1; ISO 868; ISO 1183-1; ISO 1817; ISO 23529; SAE J1545; SAE J1756; SAE J2412; SAE J2527; ASTM D7869
Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.
Scope as published by A2LA
3 lines
ISO/IEC 17025
Active1268.01
The scope document we hold says it is valid until 2027-03-31.
Accredited scope, certificate 1268.01
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017; ASTM D395; ASTM D412; ASTM D471; ASTM D523; ASTM D573; ASTM D618; ASTM D624; ASTM D638; ASTM D790; ASTM D792; ASTM D2240; ASTM D2244 | thermoplastic elastomers, plastics, and rubbers | - |
| 2 | ASTM D6147; ISO 34-1; ISO 37; ISO 105-A02; ISO 178; ISO 188; ISO 527-1; ISO 527-2; ISO 527-3; ISO 815-1; ISO 868; ISO 1183-1; ISO 1817; ISO 23529; SAE J1545; SAE J1756; SAE J2412; SAE J2527; ASTM D7869 | Plastics | - |
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. For the tests to which this accreditation applies, please refer to the laboratory’s Mechanical Scope of Accreditation.
Accredited Laboratory
A2LA has accredited
TEKNOR APEX COMPANY
Leominster, MA
for technical competence in the field of
Mechanical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates
technical competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).
Presented this 7th day of May 2025.
_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 1268.01
Valid to March 31, 2027 | ||
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Labs with overlapping accredited scope in United States
- Ghesquiere Plastic TestingHarper Woods, MI · ~915 kmA2LAShares 2 accredited methods and materialsASTM D523Plastics
- Michigan Testing InstituteSterling Heights, MI · ~922 kmA2LAShares 2 accredited methods and materialsASTM D523Plastics
- ICC Evaluation ServiceElkhart, IN · ~1,176 kmA2LAShares 2 accredited methods and materialsASTM D523Plastics
- MGA Research CorporationGreer, SC · ~1,238 kmA2LAShares 2 accredited methods and materialsASTM D523Plastics
- Atlas Weathering Services GroupMt. Prospect, IL · ~1,327 kmA2LAShares 2 accredited methods and materialsASTM D523Plastics
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.