United States
Keysight Technologies Santa Rosa Metrology Services
Keysight Technologies, Inc., 1400 Fountain Grove Parkway, 95403, Santa Rosa, CA, United States
Visit websiteA2LA 2079.01ISO/IEC 17025Register refreshed 2026-11-06
- Scope lines
- 33
- A2LA certificate
- 1
- Site in our directory
- 1
A2LA accredited scope
What this lab is accredited for
We found no published test standard numbers in this lab’s scope. The full scope as published is below.
Only this lab. Searches the method, matrix and range of each of the 33 scope lines.
A2LA certificate 2079.01 · 33 lines
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1994; ANSI/NCSL Z540.3-2006 | - | 0.01 to 500 mm |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 2 of 32
Parameter/Equipment
Range
CMC2, 3, 7 (±)
Comments
Diameter, Inner –
Measure
(1.845 to 1.855) mm
(2.395 to 2.405) mm
(2.912 to 2.928) mm
(3.495 to 3.505) mm
(6.492 to 6.508) mm
(6.995 to 7.005) mm
0.49 µm
0.49 µm
0.49 µm
0.49 µm
0.49 µm
0.49 µm
Ring gages w/
1.85 mm air probe
2.4 mm air probe
2.92 mm air probe
3.5 mm air probe
6.5 mm air probe
7 mm air probe
II. Electrical – DC/Low Frequency
Parameter/Equipment
Range
CMC
2, 7 (±)
Comments
Resistance – Measure
(10 to 100) Ω
16 mΩ
34970A data acquisition
system
III. Electrical – RF/Microwave
Parameter/Range
CMC2, 7 (±)
Comments
Reflection S11/S22 – Measure4
10 MHz to 18 GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
10 MHz to 18 GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
(±0.000 50 to ±0.0032) lin
(±2.7 to ±180) deg
(±0.29 to ±1.3) deg
(±0.11 to ±0.29) deg
(±0.04 to ±0.19) deg
(±0.000 40 to ±0.0032) lin
(±1.7 to ±180) deg
(±0.20 to ±1.3) deg
(±0.10 to ±0.29) deg
(±0.02 to ±0.19) deg
Network analyzer,
ET33717 Type N
characterized device cal kit
Network analyzer,
ET33733 APC 7 mm,
characterized device cal kit | ||
| 3 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 3 of 32
Parameter/Range
CMC2, 7 (±)
Comments
Reflection S
11/S22 – Measure4
(cont)
10 MHz to 33.0 GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
10 MHz to 50 GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
10 MHz to 70 GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
10 MHz to 8.2 GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
10 MHz to 12 GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
(±0.000 50 to ±0.0032) lin
(±2.3 to ±180) deg
(±0.26 to ±1.3) deg
(±0.11 to ±0.36) deg
(±0.03 to ±0.35) deg
(±0.000 50 to ±0.0032) lin
(±1.4 to ± 180) deg
(±0.25 to ±2.3) deg
(±0.11 to ±0.66) deg
(±0.02 to ±0.33) deg
(±0.0011 to ±0.0096) lin
(±6.8 to ±180) deg
(±0.62 to ± 6.6) deg
(±0.15 to ±
0.72) deg
(±0.11 to ±0.71) deg
(±0.000 50 to ±0.0032) lin
(±2.4 to ±180) deg
(±0.26 to ±1.3) deg
(±0.11 to ±0.29) deg
(±0.03 to ±0.19) deg
(±0.000 40 to ±0.0043) lin
(±2.1 to ±180) deg
(±0.24 to ±2.2) deg
(±0.11 to ±0.44) deg
(±0.02 to ±0.36) deg
Network analyzer,
ET33700 3.5 mm,
characterized device cal kit
Network analyzer,
ET33702 2.4 mm,
characterized device cal kit
Network analyzer,
ET36411 1.85 mm,
multi-offset short mode,
characterized device cal kit
Network analyzer,
ET51601 7-16 connector,
characterized device cal kit
Network analyzer,
ET36409 type N 75 ohm,
characterized device cal kit | ||
| 4 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 4 of 32
Parameter/Range
CMC2, 7 (±)
Comments
Reflection S
11/S22 – Measure4
(cont)
10 MHz to 6.2 GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
10 MHz to 45 GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
(8.2 to 12.4) GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
(12.4 to 18.0) GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
(±0.000 40 to ±0.0032) lin
(±2.2 to ±180) deg
(±0.25 to ±1.3) deg
(±0.11 to ±0.29) deg
(±0.03 to ±0.19) deg
(±0.0016 to ±0.0075) lin
(±8.6 to ±180) deg
(±0.87 to ±2.9) deg
(±0.22 to ±0.79) deg
(±0.14 to ±0.71) deg
(±0.0012 to ±0.0075) lin
(±8.9 to ±180) deg
(±2.5 to ±8.9) deg
(±1.9 to ±2.5) deg
(±1.9 to ±1.9) deg
(±0.000 73 to ±0.0023) lin
(±4.5 to ±180) deg
(±0.72 to ±4.5) deg
(±0.41 to ±0.72) deg
(±
0.73 to ±0.41) deg
Network analyzer,
ET36442 type F 75 ohm,
characterized device cal
kit
Network analyzer,
85056K option H01
2.92 mm multiple offset
short, open, load
calibration kit
Network analyzer,
ET36405 X band, TRL
cal kit
Network analyzer,
ET36406 P band, TRL
cal kit | ||
| 5 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 5 of 32
Parameter/Range
CMC2, 7 (±)
Comments
Reflection S
11/S22 – Measure4
(cont)
(18.0 to 26.5) GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
(26.5 to 40) GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
(33 to 50) GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
(40 to 60) GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
(±0.0013 to ± 0.0028) lin
(±7.7 to ±180) deg
(±1.1 to ±7.8) deg
(±0.53 to ±1.2) deg
(±0.48 to ±0.65) deg
(±0.0022 to ±0.0077) lin
(±13 to ±180) deg
(±1.7 to ±13) deg
(±0.67 to ±1.7) deg
(±0.64 to ±0.67) deg
(±0.0022 to ±0.0077) lin
(±13 to ±180) deg
(±1.7 to ±13) deg
(±0.74 to ±
1.7) deg
(±0.70 to ±0.74) deg
(±0.0012 to ±0.011) lin
(±17 to ±180) deg
(±5.0 to ±17) deg
(±4.1 to ±5.0) deg
(±4.1 to ±4.2) deg
Network analyzer,
ET36407 K band, TRL
cal kit
Network analyzer,
ET36320 R-band, TRL
cal kit
Network analyzer,
ET36321 Q-band, TRL
cal kit
Network analyzer
HP8510C,
multiplier test set HP
U85104A,
HP 85105A mm
wave controller
RF source HP83623B Lo
source HP 83651A/B,
ET36322 U-band, TRL
cal kit | ||
| 6 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 6 of 32
Parameter/Range
CMC2, 7 (±)
Comments
Reflection S
11/S22 – Measure4
(cont)
(50 to 75) GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
(75 to 110) GHz
(0.000 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
(110 to 170) GHz
(0.0 00 01 to 1.0) lin
(0 to 0.01) lin
(>0.01 to 0.1) lin
(>0.1 to 0.5) lin
(>0.5 to 1.0) lin
9 kHz to 8.5 GHz
(0.000 01 to 1.0) lin
9 kHz to 8.5 GHz
(0.000 01 to 1.0) lin
(±0.0022 to ±0.013) lin
(±18 to ±180) deg
(±6.0 to ±18) deg
(±5.1 to +6.0) deg
(±5.1 to ±5.3) deg
(±0.0022 to ±0.015) lin
(±30 to ±180) deg
(±9.1 to ±30) deg
(±7.5 to ±9.1) deg
(±7.5 to ±7.6) deg
(±0.0011 to ±0.085) lin
(±4.9 to ±180) deg
(±1.6 to ±5.7) deg
(±1.5 to ±
5.6) deg
(±1.2 to ±5.5) deg
(±0.001 to ±0.0042) lin
(±0.10 to ±180) deg
(±0.0003 to ±0.043) lin
(±0.06 to ±180) deg
Network analyzer
HP8510C,
multiplier test set HP
V85104A,
HP 85105A mm wave
controller,
source HP 83623B,
source HP 83651A/B,
ET36323 V-band, TRL
cal kit
Network analyzer
HP8510C,
multiplier test set HP
W85104A,
HP 85105A mm wave
controller,
source HP 83623B,
source HP 83651 A/B,
ET36324 W-band, TRL
cal kit
Network analyzer
N5247B
VDI 6.5 VNAX
frequency extender
VDI WR6.5 calibration
kit
Network analyzer
Type N
cal kit ET33717
Network analyzer
3.5 mm
cal kit ET33700 | ||
| 7 | - | -Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 7 of 32
Parameter/Range
CMC2, 7 (±)
Comments
Transmission S
12/S21 –
Measure5
9 kHz to 8.5 GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
9 kHz to 8.5 GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
10 MHz to 18 GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
10 MHz to 18 GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(±0.0073 to ±0.057) dB
(±0.09 to ±0.43) deg
(±0.047 to ±0.10) dB
(±0.33 to ±0.75) deg
(±0.072 to ±0.78) dB
(±0.54 to ±5.13) deg
(±0.0064 to ±0.055) dB
(±0.09 to ±0.41) deg
(±0.053 to ±0.10) dB
(±0.39 to ±0.75) deg
(±0.072 to ±0.78) dB
(±0.55 to ±5.1) deg
(±0.012 to ±0.042) dB
(±0.12 to ±0.34) deg
(±0.024 to ±0.025) dB
(±0.22 to ±1.8) deg
(±0.036 to ±2.2) dB
(±0.36 to ±17) deg
(±0.012 to ±0.042) dB
(±0.12 to ±0.34) deg
(±0.024 to ±0.025) dB
(±0.22 to ±1.8) deg
(±0.037 to ±2.2) dB
(±0.36 to ±17) deg
Network analyzer
Cal kit ET33717
Network analyzer
Cal kit ET33700
Network analyzer,
ET33733 APC 7 mm,
characterized device cal
kit
Network analyzer,
ET33717 type N,
characterized device cal
kit | 9000 to 8500000000 Hz |
| 8 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 8 of 32
Parameter/Range
CMC2, 7 (±)
Comments
Transmission S
12/S21 –
Measure5 (cont)
10 MHz to 33.5 GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
10 MHz to 45 GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
10 MHz to 50 GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
10 MHz to 70 GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(±0.012 to ±0.042) dB
(±0.12 to ±0.34) deg
(±0.024 to ± 0.025) dB
(±0.22 to ±1.8) deg
(±0.036 to ± 2.2) dB
(±0.36 to ±17) deg
(±0.011 to ±0.14) dB
(±0.10 to ±0.94) deg
(±0.016 to ±1.4) dB
(±0.13 to ±9.1) deg
(±0.017 to ±14) dB
(±0.29 to ±91.03) deg
(±0.012 to ±0.051) dB
(±0.12 to ±0.43) deg
(±0.023 to ±0.027) dB
(±0.23 to ±2.0) deg
(±0.034 to ±2.3) dB
(±0.36 to ±18) deg
(±0.012 to ±0.088) dB
(±0.12 to
±0.65) deg
(±0.024 to ±0.56) dB
(±0.22 to ±3.9) deg
(±0.036 to ±4.4) dB
(±0.40 to ±42) deg
Network analyzer,
ET33700 3.5 mm,
characterized device cal
kit
Network analyzer,
85056K option H01
2.92 mm multiple offset
short, open, load
calibration kit
Network analyzer,
ET33702 2.4 mm,
characterized device cal
kit
Network analyzer,
ET36411 1.85 mm,
multi offset short mode
characterized device cal
kit | ||
| 9 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 9 of 32
Parameter/Range
CMC2, 7 (±)
Comments
Transmission S
12/S21 –
Measure5 (cont)
10 MHz to 8.2 GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
10 MHz to 12 GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
10 MHz to 6.2 GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(8.2 to 12.4) GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(±0.012 to ±0.042) dB
(±0.12 to ±0.34) deg
(±0.024 to ±0.25) dB
(±0.22 to ±1.8) deg
(±0.038 to ±2.2) dB
(±0.34 to ±17) deg
(±0.012 to ±0.053) dB
(±0.12 to ±0.39) deg
(±0.024 to ±0.25) dB
(±0.22 to ±1.8) deg
(±0.038 to ±2.2) dB
(±0.37 to ±17) deg
(±0.013 to ±0.048) dB
(±0.12 to ±0.43) deg
(±
0.024 to ±0.27) dB
(±0.22 to ±2.0) deg
(±0.039 to ±2.3) dB
(±0.37 to ±18) deg
(±0.0046 to ±0.0047) dB
(±1.7 to ±1.8) deg
(±0.047 to ± 0.051) dB
(±1.8 to ±1.9) deg
(±0.051 to ±0.13) dB
(±1.9 to ±2.5) deg
Network analyzer,
ET51601 7-16 connector,
characterized device cal
kit
Network analyzer,
ET36409 type N 75 ohm,
characterized device cal
kit
Network analyzer,
ET36442 type F 75 ohm,
characterized device cal
kit
Network analyzer,
ET36405 X-band, TRL
cal kit | ||
| 10 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 10 of 32
Parameter/Range
CMC2, 7 (±)
Comments
Transmission S
12/S21 –
Measure5 (cont)
(12.4 to 18.0) GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(18.0 to 26.5) GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(26.5 to 40) GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(33 to 50) GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(±0.046 to ±0.046) dB
(±2.6 to ±2.6) deg
(±0.046 to ±0.051) dB
(±2.6 to ±2.7) deg
(±0.051 to ±0.17) dB
(±2.6 to ±3.7) deg
(±0.046 to ±0.047) dB
(±2.0 to ±5.9) deg
(±0.047 to ±0.078) dB
(±4.1 to ±6.2) deg
(±0.053 to ±0.57) dB
(±4.2 to ±9.7) deg
(±0.051 to ±0.052) dB
(±2.5 to ±2.6) deg
(±
0.052 to ±0.073) dB
(±2.6 to ±2.8) deg
(±0.073 to ±0.45) dB
(±2.8 to ±5.5) deg
(±0.051 to ±0.053) dB
(±3.1 to ±3.2) deg
(±0.052 to ±0.081) dB
(±3.2 to ±3.5) deg
(±0.081 to ±0.56) dB
(±3.5 to ±6.9) deg
Network analyzer,
ET36406 P-band, TRL
cal kit
Network analyzer,
ET36407 K-band, TRL
cal kit
Network analyzer,
ET36320 R-band, TRL
cal kit
Network analyzer
HP8510C,
ET36321 Q-band, TRL
cal kit | ||
| 11 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 11 of 32
Parameter/Range
CMC2, 7 (±)
Comments
Transmission S
12/S21 –
Measure5 (cont)
(40 to 60) GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(50 to 75) GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(75 to 110) GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(±0.051 to ±0.053) dB
(±3.8 to ±3.8) deg
(±0.053 to ±0.082) dB
(±3.8 to ±4.1) deg
(±0.082 to ±0.60) dB
(±4.1 to ±7.5) deg
(±0.034 to ±0.040) dB
(±4.7 to ±5.1) deg
(±0.040 to ±0.34) dB
(±5.1 to ±9.4) deg
(±0.34 to ±16) dB
(±9.4 to ±62) deg
(±0.038 to ±0.065) dB
(±6.9 to ±7.2) deg
(±
0.065 to ±0.33) dB
(±7.1 to ±9.9) deg
(±0.33 to ±6.5) dB
(±9.9 to ±39) deg
Network analyzer
HP8510C,
multiplier test set HP
U85104A,
HP 85105A mm wave
controller
RF source HP83623B,
Lo source HP 83651A/B,
ET36322 U-band, TRL cal
kit
Network analyzer
HP8510C,
multiplier test set HP
V85104A,
HP 85105A mm wave
controller,
source HP 83623B,
source HP 83651 A/B
ET36323 V-band, TRL cal
kit
Network analyzer
HP8510C,
multiplier test set HP
W85104A,
HP 85105A mm wave
controller,
source HP 83623B,
source HP 83651 A/B,
ET36324 W-band, TRL cal
kit | ||
| 12 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 12 of 32
Parameter/Range
CMC2, 7 (±)
Comments
Transmission S
12/S21 –
Measure5 (cont)
(110 to 170) GHz
(0 to 20) dB
(>20 to 40) dB
(>40 to 60) dB
(±0.23 to ±0.76) dB
(±1.5 to ±5.6) deg
(±0.23 to ±0.76) dB
(±1.5 to ±5.6) deg
(±0.23 to ±0.76) dB
(±1.5 to ±5.6) deg
Network analyzer
N5247B
VDI 6.5 VNAX frequency
extender
VDI WR6.5 calibration kit
Parameter/Range
CMC2, 7 (±)
Comments
RF / μ-Wave Power, Power
Sensor Calibration Factor –
Measure
9 kHz to 18.0 GHz
(0.009 to 10) MHz
(0.01 to 0.03) GHz
0.050 GHz
0.10 GHz
(0.20 to 2.6) GHz
(>2.6 to 4.5) GHz
(>4.5 to 5.7) GHz
(>5.7 to 7.2 GHz
(>7.2 to 7.9) GHz
(>7.9 to 8.6) GHz
(>8.6 to 10.1) GHz
(>10.1 to 10.6) GHz
(>10.6 to 11.2) GHz
(>11.2 to 12.4) GHz
(>12.4 to 12.8) GHz
(>12.8 to 13.8) GHz
(>13.8 to 14.2) GHz
(>14.2 to 14.7) GHz
(>14.7 to 15.6) GHz
0.0040 CF
0.0050 CF
0.0033 CF
0.0031 CF
0.0032 CF
0.0033 CF
0.0034 CF
0.0035 CF
0.0036 CF
0.0037 CF
0.0038 CF
0.0039 CF
0.0040 CF
0.0041 CF
0.0042 CF
0.0043 CF
0.0044 CF
0.0045 CF
0.0046 CF
11051A thermal converter,
478A-H75 thermistor mount,
3458A DVM,
E9304A Power Sensor
N5183B Signal Generator
11667A power splitter,
CN mount,
Arbiter Type IV power meter
N1914A Power Meter
N432A Power Meter
CF = Calibration Factor
8478B thermistor mount used
as UUT | ||
| 13 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 13 of 32
Parameter/Range
CMC2, 7 (±)
Comments
RF / μ-Wave Power, Power
Sensor Calibration Factor –
Measure (cont)
9 kHz to 18.0 GHz
(>15.6 to 16.0) GHz
(>16.0 to 16.7) GHz
(>16.7 to 16.9) GHz
(>16.9 to 17.1) GHz
(>17.1 to 17.3) GHz
(>17.3 to 18.0) GHz
9 kHz to 67 GHz
(9 to 30) kHz
(>30 to 50) kHz
(>50 to 100) kHz
(>100 to 300) kHz
(>300 to 500) kHz
(>0.50 to 1.00) MHz
(>1.00 to 3.00) MHz
(>3.00 to 5.00) MHz
(>0.005 to 0.01) GHz
(>0.01 to 0.02) GHz
(>0.02 to 0.03) GHz
(>0.03 to 0.04) GHz
(>0.04 to 0.05) GHz
(>0.10 to 0.20) GHz
(>0.20 to 0.30) GHz
(>0.3 to 0.5) GHz
(>0.5 to 1.00) GHz
(>1.0 to 2.0) GHz
(>2.0 to 3.0) GHz
(>3.0 to 4.0) GHz
(>4.0 to 5.0) GHz
(>5.0 to 6.0) GHz
(>6.0 to 7.0) GHz
(>7.0 to 8.0) GHz
(>8.0 to 9.0) GHz
(>9.0 to 10.0) GHz
(>10.0 to 11.0) GHz
(>11.0 to 12.0) GHz
(>12.0 to 13.0) GHz
(>13.0 to 14.0) GHz
(>14.0 to 15.0) GHz
(>15.0 to 16.0) GHz
(>16.0 to 17.0) GHz
0.0047 CF
0.0046 CF
0.0047 CF
0.0048 CF
0.0049 CF
0.0050 CF
0.0087 CF
0.0083 CF
0.0083 CF
0.0086 CF
0.0068 CF
0.0057 CF
0.0053 CF
0.0078 CF
0.0076 CF
0.0066 CF
0.0063 CF
0.0062 CF
0.0062 CF
0.0066 CF
0.0073 CF
0.0074 CF
0.0073 CF
0.0072 CF
0.0072 CF
0.0091 CF
0.0074 CF
0.0078 CF
0.0090 CF
0.0090 CF
0.0084 CF
0.0084 CF
0.0083 CF
0.0082 CF
0.0087 CF
0.0088 CF
0.011 CF
0.0094 CF
0.011 CF
11051A thermal converter,
478A-H75 thermistor mount,
3458A DVM,
E9304A power sensor
N5183B signal generator
11667A power splitter,
CN mount,
Arbiter Type IV power meter
N1914A power meter
N432A power meter
CF = Calibration Factor
8478B thermistor mount used as
UUT
U8488A-200 power sensor
N5247A/N5227A PNA-X
N1914B power meter (opt.)
U8488A used as UUT
U8488A-200 power sensor
N5247A/N5227A PNA-X
N1914B power meter (opt.) | ||
| 14 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 14 of 32
Parameter/Range
CMC2, 7 (±)
Comments
RF / μ-Wave Power, Power
Sensor Calibration Factor –
Measure (cont)
9 kHz to 67 GHz
(>17.0 to 18.0) GHz
(>18.0 to 19.0) GHz
(>19.0 to 20.0) GHz
(>20.0 to 21.0) GHz
(>21.0 to 22.0) GHz
(>22.0 to 23.0) GHz
(>23.0 to 24.0) GHz
(>24.0 to 25.0) GHz
(>25.0 to 26.0) GHz
(>26.0 to 27.0) GHz
(>27.0 to 28.0) GHz
(>28.0 to 29.0) GHz
(>29.0 to 30.0) GHz
(>30.0 to 31.0) GHz
(>31.0 to 32.0) GHz
(>32.0 to 33.0) GHz
(>33.0 to 34.0) GHz
(>34.0 to 35.0) GHz
(>35.0 to 36.0) GHz
(>36.0 to 37.0) GHz
(>37.0 to 38.0) GHz
(>38.0 to 39.0) GHz
(>39.0 to 40.0) GHz
(>40.0 to 41.0) GHz
(>41.0 to 42.0) GHz
(>42.0 to 43.0) GHz
(>43.0 to 44.0) GHz
(>44.0 to 45.0) GHz
(>45.0 to 46.0) GHz
(>46.0 to 47.0) GHz
(>47.0 to 48.0) GHz
(>48.0 to 49.0) GHz
(>49.0 to 50.0) GHz
(>50.0 to 51.0) GHz
(>51.0 to 52.0) GHz
(>52.0 to 53.0) GHz
(>53.0 to 54.0) GHz
(>54.0 to 55.0) GHz
(>55.0 to 56.0) GHz
(>56.0 to 57.0) GHz
(>57.0 to 58.0) GHz
(>58.0 to 59.0) GHz
0.011 CF
0.015 CF
0.013 CF
0.017 CF
0.013 CF
0.015 CF
0.014 CF
0.014 CF
0.021 CF
0.025 CF
0.021 CF
0.017 CF
0.021 CF
0.017 CF
0.024 CF
0.020 CF
0.020 CF
0.018 CF
0.018 CF
0.019 CF
0.018 CF
0.021 CF
0.020 CF
0.021 CF
0.021 CF
0.022 CF
0.022 CF
0.025 CF
0.023 CF
0.022 CF
0.022 CF
0.037 CF
0.029 CF
0.025 CF
0.027 CF
0.024 CF
0.023 CF
0.022 CF
0.021 CF
0.022 CF
0.032 CF
0.025 CF
U8488A-200 power sensor
N5247A/N5227A PNA-X
N1914B power meter (opt.)
CF = Calibration Factor | ||
| 15 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 15 of 32
Parameter/Range
CMC2, 7 (±)
Comments
RF / μ-Wave Power, Power
Sensor Calibration Factor –
Measure (cont)
9 kHz to 67 GHz
(>59.0 to 60.0) GHz
(>60.0 to 61.0) GHz
(>61.0 to 62.0) GHz
(>62.0 to 63.0) GHz
(>63.0 to 64.0) GHz
(>64.0 to 65.0) GHz
(>65.0 to 66.0) GHz
(>66.0 to 67.0) GHz
(50 to 75) GHz
50.0 GHz
51.0 GHz
52.0 GHZ
53.0 GHz
54.0 GHz
55.0 GHz
56.0 GHz
57.0 GHz
59.0 GHz
60.0 GHz
61.0 GHz
62.0 GHz
63.0 GHz
64.0 GHz
65.0 GHz
66.0 GHz
67.0 GHz
68.0 GHz
69.0 GHz
70.0 GHz
71.0 GHz
72.0 GHz
73.0 GHz
74.0 GHz
75.0 GHz
0.021 CF
0.022 CF
0.023 CF
0.022 CF
0.022 CF
0.028 CF
0.022 CF
0.022 CF
0.045 CF
0.040 CF
0.040 CF
0.040 CF
0.038 CF
0.035 CF
0.033 CF
0.034 CF
0.042 CF
0.046 CF
0.047 CF
0.047 CF
0.045 CF
0.041 CF
0.038 CF
0.037 CF
0.037 CF
0.040 CF
0.042 CF
0.045 CF
0.046 CF
0.045 CF
0.043 CF
0.042 CF
0.044 CF
U8488A-200 power sensor
N5247A/N5227A PNA-X
N1914B power meter (opt.)
CF = Calibration Factor
45774H power sensor,
E8257D signal generator as
source
V8486A power sensor used as
UUT
CF = Calibration Factor | ||
| 16 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 16 of 32
Parameter/Range
CMC2, 7 (±)
Comments
RF / μ-Wave Power, Power
Sensor Calibration Factor –
Measure (cont)
(75 to 110) GHz
75 GHz
76 GHz
78 GHz
80 GHz
82 GHz
84 GHz
86 GHz
88 GHz
90 GHz
92 GHz
94 GHz
95 GHz
96 GHz
98 GHz
100 GHz
102 GHz
104 GHz
108 GHz
110 GHz
(110 to 170) GHz
110 GHz
111 GHz
112 GHz
113 GHz
114 GHz
115 GHz
116 GHz
117 GHz
118 GHz
119 GHz
120 GHz
121 GHz
122 GHz
123 GHz
124 GHz
125 GHz
126 GHz
127 GHz
0.055 CF
0.055 CF
0.052 CF
0.052 CF
0.050 CF
0.050 CF
0.048 CF
0.047 CF
0.045 CF
0.045 CF
0.044 CF
0.044 CF
0.043 CF
0.043 CF
0.042 CF
0.042 CF
0.044 CF
0.050 CF
0.053 CF
0.055 CF
0.057 CF
0.051 CF
0.056 CF
0.057 CF
0.059 CF
0.060 CF
0.058 CF
0.058 CF
0.052 CF
0.056 CF
0.054 CF
0.057 CF
0.057 CF
0.059 CF
0.057 CF
0.056 CF
0.057 CF
45776H power sensor,
E8357D source,
OML E8257DS10 multiplier
head
PNA-X N5247B NA
VDI E8257DVDI10 multiplier
head
CF = Calibration Factor
VDI PM5B calorimeter
E8257D signal source
VDI 6.5 SGX multiplier
U8486AD sensor used as UUT
CF = Calibration Factor | ||
| 17 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 17 of 32
Parameter/Range
CMC2, 7 (±)
Comments
RF / μ-Wave Power, Power
Sensor Calibration Factor –
Measure (cont)
(75 to 110) GHz
128 GHz
129 GHz
130 GHz
131 GHz
132 GHz
133 GHz
134 GHz
135 GHz
136 GHz
137 GHz
138 GHz
139 GHz
140 GHz
141 GHz
142 GHz
143 GHz
144 GHz
145 GHz
146 GHz
147 GHz
148 GHz
149 GHz
150 GHz
151 GHz
152 GHz
153 GHz
154 GHz
155 GHz
156 GHz
157 GHz
158 GHz
159 GHz
160 GHz
161 GHz
162 GHz
163 GHz
164 GHz
165 GHz
166 GHz
167 Ghz
168 GHz
169 GHz
170 GHz
0.059 CF
0.058 CF
0.071 CF
0.059 CF
0.053 CF
0.059 CF
0.077 CF
0.060 CF
0.058 CF
0.058 CF
0.060 CF
0.059 CF
0.056 CF
0.058 CF
0.061 CF
0.056 CF
0.064 CF
0.058 CF
0.059 CF
0.060 CF
0.058 CF
0.058 CF
0.058 CF
0.061 CF
0.056 CF
0.060 CF
0.058 CF
0.059 CF
0.059 CF
0.060 CF
0.072 CF
0.060 CF
0.058 CF
0.062 CF
0.060 CF
0.059 CF
0.060 CF
0.060 CF
0.056 CF
0.063 CF
0.057 CF
0.060 CF
0.062 CF
VDI PM5B calorimeter
E8257D signal source
VDI 6.5 SGX multiplier
U8486AD sensor used as UUT
CF = Calibration Factor | ||
| 18 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 18 of 32
Parameter/Range
CMC2, 7 (±)
Comments
RF / μ-Wave Power
Absolute Power – Measure
50 MHz
1000 µW (0 dBm)
3.2 µW (-25 dBm)
1.0 µW (-30 dBm)
4.0 µW
15 nW
20 nW
478A-H75 thermistor mount,
34970 + 34901A data
acquisition switch w/DMM,
E9304A power sensor,
50 MHz 1-mW ref oscillator,
E4419B power meter
RF / μ-Wave Thermal Noise
ENR – Measure
10 MHz to 18.0 GHz
(4.5 to 6.5) dB
10 MHz
100 MHz
1 GHz
2 GHz
3 GHz
4 GHz
5 GHz
6 GHz
7 GHz
8 GHz
9 GHz
10 GHz
11 GHz
12 GHz
13 GHz
14 GHz
15 GHz
16 GHz
17 GHz
18 GHz
(14 to 16) dB
10 MHz
100 MHz
1 GHz
2 GHz
3 GHz
4 GHz
5 GHz
6 GHz
0.085 dB
0.092 dB
0.079 dB
0.080 dB
0.079 dB
0.081 dB
0.10 dB
0.081 dB
0.087 dB
0.085 dB
0.079 dB
0.079 dB
0.085 dB
0.11 dB
0.089 dB
0.11 dB
0.092 dB
0.11 dB
0.10 dB
0.087 dB
0.083 dB
0.087 dB
0.074 dB
0.075 dB
0.071 dB
0.076 dB
0.094 dB
0.078 dB
83631A/B source,
N4000A noise source standard,
N8973A noise figure analyzer
(NFA)
83631A/B source,
N4001A noise source standard,
N8973A noise figure analyzer
(NFA) | ||
| 19 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 19 of 32
Parameter/Range
CMC2, 7 (±)
Comments
RF / μ-Wave Thermal Noise ENR
– Measure (cont)
10 MHz to 18.0 GHz
(14 to 16) dB
7 GHz
8 GHz
9 GHz
10 GHz
11 GHz
12 GHz
13 GHz
14 GHz
15 GHz
16 GHz
17 GHz
18 GHz
10 MHz to 26.5 GHz
(12 to 17) dB
10 MHz
100 MHz
1 GHz
2 GHz
3 GHz
4 GHz
5 GHz
6 GHz
7 GHz
8 GHz
9 GHz
10 GHz
11 GHz
12 GHz
13 GHz
14 GHz
15 GHz
16 GHz
17 GHz
18 GHz
19 GHz
20 GHz
21 GHz
22 GHz
23 GHz
24 GHz
25 GHz
26 GHz
26.5 GHz
0.083 dB
0.082 dB
0.074 dB
0.073 dB
0.078 dB
0.11 dB
0.086 dB
0.11 dB
0.086 dB
0.098 dB
0.094 dB
0.073 dB
0.085 dB
0.089 dB
0.075 dB
0.073 dB
0.069 dB
0.074 dB
0.095 dB
0.078 dB
0.082 dB
0.080 dB
0.073 dB
0.072 dB
0.078 dB
0.12 dB
0.083 dB
0.11 dB
0.088 dB
0.11 dB
0.087 dB
0.080 dB
0.069 dB
0.082 dB
0.075 dB
0.072 dB
0.085 dB
0.082 dB
0.071 dB
0.070 dB
0.077 dB
83631A/B source,
N4001A noise source standard,
N8973A noise figure analyzer
(NFA)
83631A/B source,
N4002A noise source standard,
N8973A noise figure analyzer
(NFA) | ||
| 20 | - | -Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 20 of 32
Parameter/Range
CMC2, 7 (±)
Comments
Spectrum Analyzer –
Absolute Amplitude @ 50
MHz
(-81 to -11) dBm
Frequency Response Relative
to 50 MHz
100 kHz to 300 kHz
300 kHz to 1.0 MHz
1 MHz to 2 GHz
(2 to 3.6) GHz
(>3.6 to 6) GHz
(>6 to 12) GHz
(>12 to 14) GHz
(>14 to 18) GHz
(>18 to 22) GHz
(>22 to 26.5) GHz
(>26.5 to 28) GHz
(>28 to 35) GHz
(>35 to 40) GHz
(>40 to 42) GHz
(>42 to 50) GHz
Display Scale Fidelity @ 50
MHz
(-85 to -16) dBm
Third Order Intercept
50.01 MHz
1700.21 MHz
2800.21 MHz
5000.21 MHZ
13000.21 MHz
19500.21 MHz
23500.21 MHz
28000.21 MHz
37000.21 MHz
41500.21 MHz
46000.21 MHz
0.081 dB
0.043 dB
0.042 dB
0.038 dB
0.044 dB
0.14 dB
0.15 dB
0.15 dB
0.16 dB
0.17 dB
0.18 dB
0.22 dB
0.26 dB
0.27 dB
0.31 dB
0.36 dB
0.014 dB
0.27 dB
0.27 dB
0.28 dB
0.31 dB
0.34 dB
0.48 dB
0.49 dB
0.60 dB
0.61 dB
0.70 dB
0.69 dB
N7800A test environment
manager, N7814A X-series
signal analyzer
8494G, 8496G step attenuator
8482A, 8485A, N8487A
8487D, U8489A, 8485D,
E9304A, E9300A, N8488A,
N8485A power sensors,
E4419B power meter,
E8257D signal generator,
11667B, 11667C power splitters,
3458A DVM,
33120A function generator
Using RF power instrumentation
Using mmWave instrumentation | -81 to -11 dBm |
| 21 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 21 of 32
Parameter/Range
CMC2 (±)
Comments
Spectrum Analyzer – (cont)
Second Harmonic Intercept
Two Tone 1 MHz offset
50 MHz
290.10 MHz
1748.10 MHz
3900.10 MHz
8200.10 MHz
11750.10 MHz
DANL
50 kHz to 110 GHz
LO Phase Noise @ 1GHz
Frequency Offset:
(0.10, 0.99, 10) kHz
(100, 1000, 9900) kHz
Total Amplitude f>50 GHz
(50 to 67) GHz
(>67 to 80) GHz
(>80 to 95) GHz
(>95 to 110) GHz
0.86 dB
0.86 dB
0.86 dB
0.87 dB
0.89 dB
0.90 dB
0.28 dB
0.36 dB
0.64 dB
0.63 dB
0.65 dB
0.67 dB
0.66 dB
N7800A test environment
manager, N7814A X-series
signal analyzer
8494G, 8496G step attenuator
8482A, 8485A, N8487A
8487D, U8589A, 8485D,
E9304A, E9300A, N8488A,
N8485A power sensors,
E4419B power meter,
E8257D signal generator,
11667B, 11667C power
splitters,
3458A DVM,
33120A function generator
Ultra-low phase noise source
U8489A power sensor,
millimeter wave multiplier
module
10 dB attenuator | ||
| 22 | - | -Show page textExtracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 22 of 32
Parameter/Range
Frequency6
CMC2 (±)
Comments
Signal Generator –
SSB Phase Noise
At (1, 10, 100, 1 k, 10
k, 100 k, 1 M) Hz
Offset
At (10, 100) MHz
Offset
Digital Modulation
EVM
(16, 64, 256)
QAM, BPSK,
QPSK
RF Absolute Power –
Measure
(>21 to 30) dBm
(>14 to 21) dBm
(>-10 to +14) dBm
0.10 ≤ f ≤ 26.5 GHz
0.10 ≤ f ≤ 26.5 GHz
0.50 ≤ f ≤ 44 GHz
9 kHz to 10 MHz
(10 to 100 MHz)
100 MHz to 8 GHz
(8 to 18) GHz
(18 to 26.5) GHz
9 kHz to 10 MHz
(10 to 100 MHz)
100 MHz to 8 GHz
(8 to 18) GHz
(18 to 26.5) GHz
(>26.5 to 40) GHz
(>40 to 50) GHz
(50 to 60) GHz
(60 to 67) GHz
9 kHz to 10 MHz
(10 to 100 MHz)
100 MHz to 8 GHz
(8 to 18) GHz
(18 to 26.5) GHz
(>26.5 to 40) GHz
(>40 to 50) GHz
(50 to 60) GHz
(60 to 67) GHz
2.3 dB
4.6 dB
0.015 %
0.16 dB
0.16 dB
0.16 dB
0.16 dB
0.16 dB
0.043 dB
0.042 dB
0.042 dB
0.043 dB
0.055 dB
0.059 dB
0.074 dB
0.10 dB
0.15 dB
0.032 dB
0.029 dB
0.030 dB
0.031 dB
0.046 dB
0.051 dB
0.068 dB
0.10 dB
0.14 dB
N7800A test
environment manager
E5505A phase noise
system
PNRS_E8257D
reference source
Signal analyzer
N7800A test
environment manager
signal analyzer
Power sensor V8486A,
power meter E4419B | 21 to 30 dBm |
| 23 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 23 of 32
Parameter/Range
Frequency
CMC2 (±)
Comments
Signal Generator – (cont)
RF Absolute Power –
Measure
(1 to -1) dBm
(-10 to -30) dBm
(>-30 to -90) dBm
(<-90 to -110) dBm
(<-110 to -130) dBm
9 kHz to 10 MHz
(10 to 100 MHz)
100 MHz to 8 GHz
(8 to 18) GHz
(18 to 26.5) GHz
(>26.5 to 40) GHz
(>40 to 50) GHz
(50 to 60) GHz
(60 to 67) GHz
9 kHz to 10 MHz
(10 to 100 MHz)
100 MHz to 8 GHz
(8 to 18) GHz
(18 to 26.5) GHz
(>26.5 to 40) GHz
(>40 to 50) GHz
9 kHz to 10 MHz
(10 to 100 MHz)
100 MHz to 8 GHz
(8 to 18) GHz
(18 to 26.5) GHz
(>26.5 to 40) GHz
(>40 to 50) GHz
9 kHz to 10 MHz
(10 to 100 MHz)
100 MHz to 8 GHz
(8 to 18) GHz
(18 to 26.5) GHz
(>26.5 to 40) GHz
(>40 to 50) GHz
9 kHz to 10 MHz
(10 to 100 MHz)
100 MHz to 8 GHz
(8 to 18) GHz
(18 to 26.5) GHz
(>26.5 to 40) GHz
(>40 to 50) GHz
0.027 dB
0.023 dB
0.024 dB
0.026 dB
0.042 dB
0.048 dB
0.065 dB
0.098 dB
0.14 dB
0.044 dB
0.034 dB
0.035 dB
0.036 dB
0.049 dB
0.054 dB
0.070 dB
0.046 dB
0.036 dB
0.037 dB
0.038 dB
0.051 dB
0.055 dB
0.071 dB
0.054 dB
0.046 dB
0.047 dB
0.049 dB
0.060 dB
0.064 dB
0.085 dB
0.070 dB
0.061 dB
0.062 dB
0.066 dB
0.076 dB
0.079 dB
0.097 dB
N7800A test
environment manager | ||
| 24 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 24 of 32
Table 1. Reflection S11/S22 Magnitude 1.0 mm Connector CMCs
Frequency
10 MHz to
100 MHz
>100 MHz
to 1 GHz
>1 GHz to
10 GHz
>10 GHz to
20 GHz
>20 GHz to
40 GHz
>40 GHz to
60 GHz
abs(Sxx)
0 0.0004 to
0.0012
0.0005 to
0.0016
0.0015 to
0.0027
0.0014 to
0.0016
0.0015 to
0.0028
0.0020 to
0.0031
0.1 0.0005 to
0.0013
0.0005 to
0.0016
0.0015 to
0.0026
0.0013 to
0.0016
0.0014 to
0.0019
0.0019 to
0.0030
0.2 0.0006 to
0.0013
0.0006 to
0.0015
0.0015 to
0.0026
0.0014 to
0.0016
0.0014 to
0.0020
0.0020 to
0.0032
0.3 0.0007 to
0.0015
0.0008 to
0.0015
0.0015 to
0.0025
0.0014 to
0.0016
0.0014 to
0.0022
0.0022 to
0.0037
0.4 0.0009 to
0.0016
0.0009 to
0.0015
0.0015 to
0.0024
0.0014 to
0.0017
0.0014 to
0.0024
0.0024 to
0.0043
0.5 0.0010 to
0.0018
0.0011 to
0.0015
0.0015 to
0.0022
0.0015 to
0.0018
0.0015 to
0.0027
0.0027 to
0.0049
0.6 0.0012 to
0.0020
0.0012 to
0.0016
0.0016 to
0.0021
0.0016 to
0.0019
0.0016 to
0.0030
0.0030 to
0.0057
0.7 0.0013 to
0.0022
0.0014 to
0.0016
0.0016 to
0.0020
0.0017 to
0.0020
0.0017 to
0.0033
0.0033 to
0.0064
0.8 0.0015 to
0.0024
0.0015 to
0.0016
0.0016 to
0.0019
0.0019 to
0.0022
0.0019 to
0.0037
0.0037 to
0.0072
0.9 0.0016 to
0.0027
0.0016 to
0.0017
0.0017 to
0.0021
0.0021 to
0.0023
0.0021 to
0.0040
0.0040 to
0.0080
1 0.0006 to
0.0025
0.0006 to
0.0008
0.0006 to
0.0017
0.0017 to
0.0022
0.0019 to
0.0042
0.0042 to
0.0087 | ||
| 25 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 25 of 32
Table 2. Reflection S11/S22 Magnitude 1.0 mm Connector CMCs (continued)
Frequency
>60 GHz
to 80 GHz
>80 GHz to
100 GHz
>100 GHz
to 110 GHz
>110 GHz
to 120 GHz
>120 GHz
to 125 GHz
abs(Sxx)
0 0.0028 to
0.0053
0.0044 to
0.0053
0.0045 to
0.0053
0.0046 to
0.0077
0.0077 to
0.011
0.1 0.0028 to
0.0051
0.0045 to
0.0051
0.0049 to
0.0052
0.0050 to
0.0074
0.0074 to
0.010
0.2 0.0032 to
0.0056
0.0051 to
0.0058
0.0057 to
0.0060
0.0059 to
0.0081
0.0081 to
0.011
0.3 0.0037 to
0.0063
0.0060 to
0.0068
0.0068 to
0.0072
0.0072 to
0.0092
0.0092 to
0.012
0.4 0.0043 to
0.0071
0.0070 to
0.0081
0.0080 to
0.0087
0.0087 to
0.011
0.011 to
0.013
0.5 0.0049 to
0.0081
0.0080 to
0.0094
0.0094 to
0.010
0.010 to
0.012
0.012 to
0.014
0.6 0.0057 to
0.0089
0.0089 to
0.011
0.011 to
0.012
0.012 to
0.014
0.014 to
0.016
0.7 0.0064 to
0.0099
0.0099 to
0.012
0.012 to
0.014
0.014 to
0.016
0.016 to
0.018
0.8 0.0072 to
0.011
0.011 to
0.014
0.014 to
0.016
0.016 to
0.018
0.018 to
0.020
0.9 0.0079 to
0.012
0.012 to
0.016
0.016 to
0.017
0.017 to
0.020
0.020 to
0.022
1 0.0086 to
0.013
0.013 to
0.017
0.017 to
0.019
0.019 to
0.022
0.022 to
0.024 | ||
| 26 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 26 of 32
Table 3. Reflection S11/S22 Phase 1.0 mm Connector CMCs
Frequency
10 MHz to
100 MHz
>100 MHz
to 1 GHz
>1 GHz to
10 GHz
>10 GHz to
20 GHz
>20 GHz to
40 GHz
>40 GHz to
60 GHz
abs(Sxx)
0 - - - - - -
0.1 0.23 deg to
0.69 deg
0.26 deg to
0.85 deg
0.85 deg to
1.45 deg
0.79 deg to
0.90 deg
0.84 deg to
1.13 deg
1.11 deg to
1.72 deg
0.2 0.15 deg to
0.37 deg
0.17 deg to
0.41 deg
0.41 deg to
0.69 deg
0.44 deg to
0.50 deg
0.46 deg to
0.67 deg
0.67 deg to
1.11 deg
0.3 0.12 deg to
0.26 deg
0.14 deg to
0.27 deg
0.27 deg to
0.45 deg
0.34 deg to
0.38 deg
0.34 deg to
0.56 deg
0.56 deg to
1.00 deg
0.4 0.11 deg to
0.22 deg
0.13 deg to
0.21 deg
0.21 deg to
0.33 deg
0.29 deg to
0.32 deg
0.29 deg to
0.52 deg
0.52 deg to
0.97 deg
0.5 0.11 deg to
0.19 deg
0.12 deg to
0.18 deg
0.18 deg to
0.29 deg
0.27 deg to
0.29 deg
0.27 deg to
0.52 deg
0.52 deg to
0.97 deg
0.6 0.10 deg to
0.18 deg
0.12 deg to
0.17 deg
0.17 deg to
0.28 deg
0.27 deg to
0.28 deg
0.27 deg to
0.51 deg
0.51 deg to
0.97 deg
0.7 0.10 deg to
0.17 deg
0.11 deg to
0.16 deg
0.16 deg to
0.27 deg
0.26 deg to
0.28 deg
0.26 deg to
0.51 deg
0.51 deg to
0.97 deg
0.8 0.10 deg to
0.16 deg
0.11 deg to
0.15 deg
0.15 deg to
0.26 deg
0.26 deg to
0.27 deg
0.26 deg to
0.51 deg
0.51 deg to
0.97 deg
0.9 0.10 deg to
0.16 deg
0.11 deg to
0.15 deg
0.15 deg to
0.26 deg
0.26 deg to
0.27 deg
0.26 deg to
0.51 deg
0.51 deg to
0.97 deg
1 0.04 deg to
0.14 deg
0.06 deg to
0.13 deg
0.13 deg to
0.25 deg
0.25 deg to
0.26 deg
0.25 deg to
0.51 deg
0.51 deg to
0.97 deg | ||
| 27 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 27 of 32
Table 4. Reflection S11/S22 Phase 1.0 mm Connector CMCs (continued)
Frequency
>60 GHz
to 80 GHz
>80 GHz to
100 GHz
>100 GHz
to 110 GHz
>110 GHz
to 120 GHz
>120 GHz
to 125 GHz
abs(Sxx)
0 - - - - -
0.1 1.7 deg to
3.0 deg
2.8 deg to
3.0 deg
2.9 deg to
3.1 deg
3.1 deg to
4.4 deg
4.3 deg to
6.1 deg
0.2 1.1 deg to
1.8 deg
1.8 deg to
2.0 deg
2.0 deg to
2.2 deg
2.2 deg to
2.8 deg
2.7 deg to
3.4 deg
0.3 1.0 deg to
1.5 deg
1.5 deg to
1.8 deg
1.8 deg to
2.0 deg
2.0 deg to
2.4 deg
2.3 deg to
2.7 deg
0.4 0.97 deg to
1.4 deg
1.4 deg to
1.7 deg
1.7 deg to
2.0 deg
2.0 deg to
2.2 deg
2.1 deg to
2.4 deg
0.5 0.97 deg to
1.4 deg
1.4 deg to
1.7 deg
1.7 deg to
1.9 deg
1.9 deg to
2.2 deg
2.1 deg to
2.3 deg
0.6 0.97 deg to
1.3 deg
1.3 deg to
1.7 deg
1.7 deg to
1.9 deg
1.9 deg to
2.1 deg
2.0 deg to
2.2 deg
0.7 0.97 deg to
1.3 deg
1.3 deg to
1.7 deg
1.7 deg to
1.9 deg
1.9 deg to
2.1 deg
2.0 deg to
2.2 deg
0.8 0.97 deg to
1.3 deg
1.3 deg to
1.7 deg
1.7 deg to
1.9 deg
1.9 deg to
2.1 deg
2.0 deg to
2.2 deg
0.9 0.97 deg to
1.3 deg
1.3 deg to
1.7 deg
1.7 deg to
1.9 deg
1.9 deg to
2.1 deg
2.0 deg to
2.2 deg
1 0.97 deg to
1.3 deg
1.3 deg to
1.7 deg
1.7 deg to
1.9 deg
1.9 deg to
2.1 deg
2.0 deg to
2.2 deg | ||
| 28 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 28 of 32
Table 5. Transmission S21/S12 Magnitude 1.0 mm Connector CMCs
Frequency
10 MHz to
100 MHz
>100 MHz
to 1 GHz
>1 GHz to
10 GHz
>10 GHz to
20 GHz
>20 GHz to
40 GHz
>40 GHz to
60 GHz
abs(Syx)
0 dB 0.007 dB to
0.021 dB
0.007 dB to
0.009 dB
0.008 dB to
0.013 dB
0.013 dB to
0.018 dB
0.018 dB to
0.038 dB
0.036 dB to
0.072 dB
-3 dB 0.016 dB to
0.026 dB
0.016 dB to
0.017 dB
0.016 dB to
0.019 dB
0.019 dB to
0.022 dB
0.022 dB to
0.040 dB
0.039 dB to
0.073 dB
-6 dB 0.016 dB to
0.028 dB
0.016 dB to
0.017 dB
0.017 dB to
0.019 dB
0.019 dB to
0.022 dB
0.022 dB to
0.040 dB
0.039 dB to
0.073 dB
-10
dB
0.016 dB to
0.033 dB
0.016 dB to
0.017 dB
0.017 dB to
0.019 dB
0.019 dB to
0.023 dB
0.023 dB to
0.040 dB
0.039 dB to
0.073 dB
-20
dB
0.017 dB to
0.074 dB 0.017 dB 0.017 dB to
0.020 dB
0.020 dB to
0.023 dB
0.023 dB to
0.040 dB
0.039 dB to
0.074 dB
-30
dB
0.018 dB to
0.220 dB
0.017 dB to
0.018 dB
0.017 dB to
0.020 dB
0.020 dB to
0.023 dB
0.023 dB to
0.040 dB
0.039 dB to
0.074 dB
-40
dB
0.021 dB to
0.691 dB
0.017 dB to
0.021 dB
0.018 dB to
0.020 dB
0.020 dB to
0.023 dB
0.023 dB to
0.041 dB
0.040 dB to
0.075 dB
-60
dB
0.124 dB to
6.9 dB
0.033 dB to
0.12 dB
0.027 dB to
0.036 dB
0.029 dB to
0.032 dB
0.032 dB to
0.079 dB
0.073 dB to
0.10 dB
-80
dB
1.2 dB to
69 dB
0.28 dB to
1.2 dB
0.20 dB to
0.31 dB
0.20 dB to
0.22 dB
0.20 dB to
0.69 dB
0.49 dB to
0.87 dB | ||
| 29 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 29 of 32
Table 6. Transmission S21/S12 Magnitude 1.0 mm Connector CMCs (continued)
Frequency
>60 GHz to
80 GHz
>80 GHz to
100 GHz
>100 GHz
to 110 GHz
>110 GHz
to 120 GHz
>120 GHz
to 125 GHz
abs(Syx)
0 dB 0.071 dB to
0.11 dB
0.11 dB to
0.14 dB
0.14 dB to
0.16 dB
0.16 dB to
0.18 dB
0.18 dB to
0.20 dB
-3 dB 0.072 dB to
0.11 dB
0.11 dB to
0.14 dB
0.14 dB to
0.16 dB
0.16 dB to
0.18 dB
0.18 dB to
0.20 dB
-6 dB 0.072 dB to
0.11 dB
0.11 dB to
0.15 dB
0.14 dB to
0.16 dB
0.16 dB to
0.18 dB
0.18 dB to
0.20 dB
-10
dB
0.072 dB to
0.11 dB
0.11 dB to
0.15 dB
0.14 dB to
0.16 dB
0.16 dB to
0.18 dB
0.18 dB to
0.20 dB
-20
dB
0.073 dB to
0.11 dB
0.11 dB to
0.15 dB
0.14 dB to
0.16 dB
0.16 dB to
0.18 dB
0.18 dB to
0.20 dB
-30
dB
0.073 dB to
0.11 dB
0.11 dB to
0.15 dB
0.14 dB to
0.16 dB
0.16 dB to
0.18 dB
0.18 dB to
0.20 dB
-40
dB
0.074 dB to
0.11 dB
0.11 dB to
0.15 dB
0.14 dB to
0.16 dB
0.16 dB to
0.18 dB
0.18 dB to
0.20 dB
-60
dB
0.093 dB to
0.14 dB
0.14 dB to
0.18 dB
0.18 dB to
0.20 dB
0.20 dB to
0.23 dB
0.23 dB to
0.25 dB
-80
dB
0.50 dB to
0.81 dB
0.81 dB to
1.1 dB
1.1 dB to
1.3 dB
1.3 dB to
1.4 dB
1.4 dB to
1.6 dB | ||
| 30 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 30 of 32
Table 7. Transmission S21/S12 Phase 1.0 mm Connector CMCs
Frequency
10 MHz to
100 MHz
>100 MHz
to 1 GHz
>1 GHz to
10 GHz
>10 GHz to
20 GHz
>20 GHz to
40 GHz
>40 GHz to
60 GHz
abs(Syx)
0 dB 0.04 deg to
0.14 deg
0.06 deg to
0.17 deg
0.17 deg to
0.24 deg
0.21 deg to
0.38 deg
0.38 deg to
0.66 deg
0.66 deg to
1.1 deg
-3 dB 0.10 deg to
0.17 deg
0.11 deg to
0.19 deg
0.19 deg to
0.25 deg
0.23 deg to
0.39 deg
0.39 deg to
0.66 deg
0.66 deg to
1.1 deg
-6 dB 0.10 deg to
0.18 deg
0.11 deg to
0.19 deg
0.19 deg to
0.25 deg
0.23 deg to
0.39 deg
0.39 deg to
0.66 deg
0.66 deg to
1.1 deg
-10
dB
0.10 deg to
0.22 deg
0.11 deg to
0.19 deg
0.19 deg to
0.25 deg
0.23 deg to
0.39 deg
0.39 deg to
0.66 deg
0.66 deg to
1.1 deg
-20
dB
0.10 deg to
0.49 deg
0.11 deg to
0.19 deg
0.19 deg to
0.25 deg
0.23 deg to
0.39 deg
0.39 deg to
0.66 deg
0.66 deg to
1.1 deg
-30
dB
0.11 deg to
1.5 deg
0.12 deg to
0.19 deg
0.19 deg to
0.25 deg
0.23 deg to
0.39 deg
0.39 deg to
0.66 deg
0.66 deg to
1.1 deg
-40
dB
0.14 deg to
4.6 deg
0.13 deg to
0.19 deg
0.19 deg to
0.25 deg
0.23 deg to
0.39 deg
0.39 deg to
0.66 deg
0.66 deg to
1.1 deg
-60
dB
0.82 deg to
46 deg
0.25 deg to
0.82 deg
0.26 deg to
0.33 deg
0.27 deg to
0.42 deg
0.42 deg to
0.79 deg
0.78 deg to
1.2 deg
-80
dB
8.1 deg to
460 deg
1.8 deg to
8.1 deg
1.3 deg to
2.1 deg
1.3 deg to
1.5 deg
1.4 deg to
4.6 deg
3.4 deg to
5.8 deg | ||
| 31 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 31 of 32
Table 8. Transmission S21/S12 Phase 1.0 mm Connector CMCs (continued)
Frequency
>60 GHz
to 80 GHz
>80 GHz to
100 GHz
>100 GHz
to 110 GHz
>110 GHz
to 120 GHz
>120 GHz
to 125 GHz
abs(Syx)
0 dB 1.1 deg to
1.3 deg
1.3 deg to
1.8 deg
1.8 deg to
1.9 deg
1.9 deg to
2.1 deg
2.1 deg to
2.4 deg
-3 dB 1.1 deg to
1.3 deg
1.3 deg to
1.8 deg
1.8 deg to
2.0 deg
2.0 deg to
2.1 deg
2.1 deg to
2.4 deg
-6 dB 1.1 deg to
1.3 deg
1.3 deg to
1.8 deg
1.8 deg to
2.0 deg
2.0 deg to
2.1 deg
2.1 deg to
2.4 deg
-10
dB
1.1 deg to
1.3 deg
1.3 deg to
1.8 deg
1.8 deg to
2.0 deg
2.0 deg to
2.1 deg
2.1 deg to
2.4 deg
-20
dB
1.1 deg to
1.3 deg
1.3 deg to
1.8 deg
1.8 deg to
2.0 deg
2.0 deg to
2.1 deg
2.1 deg to
2.4 deg
-30
dB
1.1 deg to
1.4 deg
1.3 deg to
1.8 deg
1.8 deg to
2.0 deg
2.0 deg to
2.1 deg
2.1 deg to
2.4 deg
-40
dB
1.1 deg to
1.4 deg
1.4 deg to
1.8 deg
1.8 deg to
2.0 deg
2.0 deg to
2.1 deg
2.1 deg to
2.4 deg
-60
dB
1.2 deg to
1.5 deg
1.4 deg to
1.9 deg
1.9 deg to
2.1 deg
2.1 deg to
2.3 deg
2.3 deg to
2.6 deg
-80
dB
3.4 deg to
5.4 deg
5.4 deg to
7.3 deg
7.3 deg to
8.4 deg
8.4 deg to
9.7 deg
9.7 deg to
10 deg
IV. Mechanical
Parameter/Equipment
Range
CMC
2 (±)
Comments
Torque Drivers &
Wrenches
(1 to 50) ozfꞏin
(2.5 to 250) lbfꞏin
1.8 % of reading
2.1 % of reading
Torque transducers | ||
| 32 | Extracted from the scope document; tables may not line up. View scope for the original. (A2LA Cert. No. 2079.01) 03/26/2024 Page 32 of 32
V. Time & Frequency
Parameter/Equipment
Range
CMC2, 7 (±)
Comments
Frequency – Measuring
Equipment
10 MHz
1 part in10
12
HP 5071A cesium beam;
HP 58503B GPS-
disciplined oscillator
_______________________
1 This laboratory offers commercial calibration service.
2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement
that a laboratory can achieve within its scope of accreditation when performing more or less routine
calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent
expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage
factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory
may be greater than the CMC due to the behavior of the customer’s device and to influences from the
circumstances of the specific calibration.
3
In the statement of CMC, L is the numerical value of the nominal length in mm and D is the numerical
value of the nominal diameter in mm.
4 S11/S22 reflection CMCs are a function of actual measured reflection and transmission magnitude. The
CMC statements assume S21=S12=0.
5 S21/S12 transmission CMCs are a function of actual measured transmission and reflection magnitudes.
These CMC statements assume S11=S22=0.
6 In the frequency column, f is the frequency.
7 The type of instrument or material being calibrated is defined by the parameter. This indicates the laboratory
is capable of calibrating instruments that measure or generate the values in the ranges indicated for the listed
measurement parameter.
8 This scope meets A2LA’s P112 Flexible Scope Policy. | ||
| 33 | ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1994; ANSI/NCSL Z540.3-2006; R205 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Keysight Technologies, Inc., 1400 Fountain Grove Parkway, Santa Rosa, CA, 95403, US
38.44049, -122.71410
Open in MapsLabs with overlapping accredited scope in United States
- Rice Lake Weighing Systems (Formerly Heusser Neweigh)Concord, CA · ~79 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Applied Technical ServicesSacramento, CA · ~107 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- International Process SolutionsSan Carlos, CA · ~111 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Trescal, Inc. - Pleasanton, CAPleasanton, CA · ~114 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Troxler Electronic Laboratories, Inc.Rancho Cordova, CA · ~124 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.