Poland

Sieć Badawcza Łukasiewicz - Instytut Materiałów Polimerowych

ul. M. Skłodowskiej-Curie 55, 87-100, Toruń, Poland

PCA AB 1376ISO/IEC 17025Register refreshed 2026-11-06

One of 3 sites of this organization in our directory. View the organization

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 14
PCA certificate: 1
Sites in our directory: 3

PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 14 standard numbers and the 13 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO7

ISO 178Plastics - Determination of flexural properties

ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

ISO 1183-3Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method

ISO 4593Plastics - Film and sheeting - Determination of thickness by mechanical scanning

ISO 7765-1Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods

ISO 8295Plastics - Film and sheeting - Determination of the coefficients of friction

ISO 11357 series3

ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles

ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height

ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization

ISO 527 series3

ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles

ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics

ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets

Other standards1

PN-C-89258-1

Read from the PCA scope document we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

2 lines

PCA

ISO/IEC 17025

Active

AB 1376

The scope document we hold says it is valid until 2028-11-08.

View on PCA

Accredited scope, certificate AB 1376

Line	Method	Matrix	Range
1	-	plastics and plastic products Show page text Extracted from the scope document; tables may not line up. View scope for the original. PCA Zakres akredytacji Nr AB 1376 Scope of accreditation No. AB 1376 ZAKRES AKREDYTACJI LABORATORIUM BADAWCZEGO SCOPE OF ACCREDITATION FOR TESTING LABORATORY Nr/No. AB 1376 wydany przez / issued by POLSKIE CENTRUM AKREDYTACJI 01-382 Warszawa, ul. Szczotkarska 42 Wydanie/Issue 15 z/of 03.04.2025 KIEROWNIK DZIAŁU AKREDYTACJI BADAŃ MECHANICZNYCH I FIZYCZNYCH MARIA SZAFRAN Niniejszy dokument jest załącznikiem do Certyfikatu Akredytacji Nr AB 1376 z dnia 03.04.2025 r. Cykl akredytacji od 08.10.2024 r. do 08.11.2028 r. Status akredytacji oraz aktualność zakresu akredytacji można potwierdzić na stronie internetowej PCA www.pca.gov.pl This document is an annex to accreditation certificate No. AB 1376 of 03.04.2025 Accreditation cycle from 08.10.2024 to 08.11.2028 The status of accreditation and validity of the scope of accreditation can be confirmed at PCA website www.pca.gov.pl Wydanie nr / Issue No. 15, 03.04.2025 1/3 Nazwa i adres / Name and address SIEĆ BADAWCZA ŁUKASIEWICZ – INSTYTUT MATERIAŁÓW POLIMEROWYCH CENTRUM PRZETWÓRSTWA TWORZYW POLIMEROWYCH LABORATORIUM BADAWCZE „POLIMER” ul. M. Skłodowskiej-Curie 55 87-100 Toruń Kod identyfikacyjny / Identification code ) Dziedzina i przedmiot badań / Field of testing and item: - J/21 - Badania mechaniczne wyrobów z tworzyw sztucznych / Mechanical tests of plastic products - N/21 - Badania właściwości fizycznych tworzyw sztucznych i wyrobów z tworzyw sztucznych / Tests of physical properties of plastics and plastic products Wersja strony/Page version: A ) Kod identyfikacyjny zgodnie z załącznikiem do dokumentu DAB -07 dostępnym na stronie internetowej www.pca.gov.pl / The identification code according to the Annex to document DA B-07, available at PCA website www.pca.gov.pl AB 1376	-
2	PN-EN ISO 527-1:2020-01; PN-EN ISO 527-2:2012; PN-EN ISO 178:2011; PN-EN ISO 178:2011/A1:2013-06; PN-EN ISO 179-1:2023-11; PN-EN ISO 1133-1:2022-12; PN-EN ISO 1183-3:2003; PN-EN ISO 527-3:2019-01; PN-EN ISO 7765-1:2005; PN-ISO 4593:1999; PN-C-89258-1:1997; PN-EN ISO 8295:2005; PN-EN ISO 11357-2:2020-09; PN-EN ISO 11357-1:2023-09; PN-EN ISO 11357-3:2018-06	Tworzywa sztuczne; Wyroby z tworzyw sztucznych	See scope document

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

ul. M. Skłodowskiej-Curie 55, Toruń, 87-100, PL

53.01454, 18.59658

Open in Maps

Other Locations

2 other sites in this organization

← All accredited testing labs in Poland

Accreditation data refreshed from the PCA register on 2026-11-06.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.