Registers refreshed 2026-11-08.See refresh dates
Poland

Sieć Badawcza Łukasiewicz - Instytut Materiałów Polimerowych

ul. Chorzowska 50 A, 44-100, Gliwice, Poland

PCA AB 163ISO/IEC 17025Register refreshed 2026-11-06
One of 3 sites of this organization in our directory. View the organization

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
96
PCA certificate
1
Sites in our directory
3
PCA accredited scope

What this lab is accredited for

Our reading of the PCA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 96 standard numbers and the 88 official names we hold. When no standard matches, it searches the method text of every scope line.

ISO50
ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 178Plastics - Determination of flexural properties
ISO 306Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 580Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating
ISO 604Plastics - Determination of compressive properties
ISO 868Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1513Paints and varnishes - Examination and preparation of test samples
ISO 1519Paints and varnishes - Bend test (cylindrical mandrel)
ISO 1520Paints and varnishes - Cupping test
ISO 1522Paints and varnishes - Pendulum damping test
Show all 50
ISO 2409Paints and varnishes - Cross-cut test
ISO 2505Thermoplastics pipes - Longitudinal reversion - Test method and parameters
ISO 2808Paints and varnishes - Determination of film thickness
ISO 2811-1Paints and varnishes - Determination of density - Part 1: Pycnometer method
ISO 2813Paints and varnishes - Determination of gloss value at 20°, 60° and 85°
ISO 2815Paints and varnishes - Buchholz indentation test
ISO 3126Plastics piping systems - Plastics components - Determination of dimensions
ISO 3127Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method
ISO 3251Paints, varnishes and plastics - Determination of non-volatile-matter content
ISO 4624Paints and varnishes - Pull-off test for adhesion
ISO 6259-1Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
ISO 6259-3Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes
ISO 6270-1Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure)
ISO 6270-2Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 7685Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial ring stiffness
ISO 7783Paints and varnishes - Determination of water-vapour transmission properties - Cup method
ISO 7784-1Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen
ISO 7784-2Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen
ISO 8317Child-resistant packaging - Requirements and testing procedures for reclosable packages
ISO 9117-3Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini
ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests
ISO 9852Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method
ISO 9967Thermoplastics pipes - Determination of creep ratio
ISO 9969Thermoplastics pipes - Determination of ring stiffness
ISO 11173Thermoplastics pipes - Determination of resistance to external blows - Staircase method
ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
ISO 11890-1Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Part 1: Gravimetric method for VOC determination
ISO 11890-2Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method
ISO 11998Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings
ISO 12944-6Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods
ISO 13254Thermoplastics piping systems for non-pressure applications - Test method for watertightness
ISO 13255Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
ISO 13259Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints
ISO 13263Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
ISO 13953Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
ISO 13967Thermoplastics fittings - Determination of ring stiffness
ISO 13968Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
ISO 14125Fibre-reinforced plastic composites - Determination of flexural properties
ISO 4628 series7
ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
ISO 4628-3Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
ISO 4628-4Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
ISO 4628-5Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking
ISO 4628-6Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method
ISO 4628-8Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
ISO 527 series5
ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles
ISO 527-2Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
ISO 527-4Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-5Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
ISO 11357 series4
ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11357-2Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-6Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 1167 series4
ISO 1167-1Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method
ISO 1167-2Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces
ISO 1167-3Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components
ISO 1167-4Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies
EN3
EN 728
EN 1228
EN 1393
ISO 16474 series3
ISO 16474-1Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance
ISO 16474-2Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 16474-3Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
ISO 2507 series3
ISO 2507-1Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method
ISO 2507-2Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
ISO 2507-3Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
ISO 2812 series3
ISO 2812-1Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water
ISO 2812-3Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium
ISO 2812-4Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods
ISO 3451 series3
ISO 3451-1Plastics - Determination of ash - Part 1: General methods
ISO 3451-4Plastics - Determination of ash - Part 4: Polyamides
ISO 3451-5Plastics - Determination of ash - Part 5: Poly(vinyl chloride)
ISO 4892 series3
ISO 4892-1Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance and requirements
ISO 4892-2Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
ISO 4892-3Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
ISO 75 series3
ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method
ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
ISO 75-3Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
Other standards5
IEC 60695-11-10
PN-C-81536
PN-C-81913
PN-C-81914
PN-C-89265-4

Read from the PCA scope document we downloaded on 2026-03-13. Register refreshed 2026-11-06.

Scope as published by PCA

10 lines
PCA

ISO/IEC 17025

Active

AB 163

The scope document we hold says it is valid until 2029-09-17.

View on PCA

Location

ul. Chorzowska 50 A, Gliwice, 44-100, PL

50.30113, 18.66235

Open in Maps

Other Locations

2 other sites in this organization

Piastów, PL
View
Toruń, PL
View
← All accredited testing labs in Poland

Labs with overlapping accredited scope in Poland

Accreditation data refreshed from the PCA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the PCA entry linked above.