Registers refreshed 2026-11-08.See refresh dates
China

MGT (Hangzhou) Testing Technology Co.,

South side of the 1F and 2F, Building D, No. 222, Fuxian Road, Yinhu Street, Fuyang District, Hangzhou, Zhejiang, People's Republic of China, Hangzhou, Zhejiang, China

A2LA 7711.01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
65
A2LA certificate
1
Site in our directory
1
A2LA accredited scope

What this lab is accredited for

Our reading of the A2LA scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 65 standard numbers and the 34 official names we hold. When no standard matches, it searches the method text of every scope line.

ETSI16
ETSI EN 300 220-1
ETSI EN 300 220-2
ETSI EN 300 220-3-1
ETSI EN 300 220-3-2
ETSI EN 300 220-4
ETSI EN 300 328Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum
ETSI EN 300 330Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
ETSI EN 300 422-1
ETSI EN 300 422-2
ETSI EN 300 440
ETSI EN 301 893
ETSI EN 302 502
ETSI EN 302 571
ETSI EN 303 413Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard for access to radio spectrum
ETSI EN 303 417
ETSI TS 103 701
IEC9
IEC 60601-1Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
IEC 61010-1Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 62109-1
IEC 62109-2
IEC 62311Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz)

Certificate says EN 62311. Probably the same standard; not checked against the EN document.

IEC 62368-1Audio/video, information and communication technology equipment - Part 1: Safety requirements+1 national

National versions in the same scope

AS/NZS 62368.1national version with changes

Identical and changed are as the national standards body lists them; we read that on 2026-10-06.

IEC 62477-1
IEC 62477-2
IEC 62479Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
IEC 61000 series8
IEC 61000-3-2Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
IEC 61000-3-3Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
IEC 61000-3-11Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection
IEC 61000-3-12Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase

Certificate says EN 61000-3-12. Probably the same standard; not checked against the EN document.

IEC 61000-4-2Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-13Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
IEC 61000-6-3Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments+1 national

National versions in the same scope

AS/NZS 61000.6.3national version with changes

Identical and changed are as the national standards body lists them; we read that on 2026-10-06.

Certificate says EN 61000-6-3. Probably the same standard; not checked against the EN document.

IEC 61000-6-4Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments+1 national

National versions in the same scope

AS/NZS 61000.6.4identical to it

Identical and changed are as the national standards body lists them; we read that on 2026-10-06.

EN7
EN 50364
EN 50383
EN 50385
EN 50401
EN 50663Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz)
EN 50664
EN 50665
CISPR5
CISPR 11Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement+1 national

National versions in the same scope

AS CISPR 11national version with changes

Identical and changed are as the national standards body lists them; we read that on 2026-10-06.

Certificate says EN 55011. Probably the same standard; not checked against the EN document.

CISPR 14-1Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission+2 national

National versions in the same scope

AS CISPR 14.1national version with changes

AS/NZS CISPR 14.1national version with changes

Identical and changed are as the national standards body lists them; we read that on 2026-10-06.

Certificate says IEC 55014-1. Probably the same standard; not checked against the EN document.

CISPR 15Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment+2 national

National versions in the same scope

AS CISPR 15national version with changes

AS/NZS CISPR 15national version with changes

Identical and changed are as the national standards body lists them; we read that on 2026-10-06.

Certificate says IEC 55015. Probably the same standard; not checked against the EN document.

CISPR 25Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers+1 national

National versions in the same scope

AS/NZS CISPR 25probably the same standard; matched by number only

Certificate says IEC 55025. Probably the same standard; not checked against the EN document.

CISPR 32Electromagnetic compatibility of multimedia equipment - Emission requirements+1 national

National versions in the same scope

AS/NZS CISPR 32identical to it

Identical and changed are as the national standards body lists them; we read that on 2026-10-06.

Certificate says EN 55032. Probably the same standard; not checked against the EN document.

ISO 11452 series5
ISO 11452-1Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology
ISO 11452-2Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
ISO 11452-4Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
ISO 11452-5Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5: Stripline
ISO 11452-8Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
IEC 61851 series4
IEC 61851-1
IEC 61851-23
IEC 61851-24
IEC 61851-25
EN 18031 series3
EN 18031-1
EN 18031-2
EN 18031-3
ISO 7637 series3
ISO 7637-1Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Vocabulary and general considerations
ISO 7637-2Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
Other standards5
ANSI C63.4American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
FCC PART 15Radio Frequency Devices
ISO 10605Road vehicles - Test methods for electrical disturbances from electrostatic discharge
ISO 17409Electrically propelled road vehicles - Conductive power transfer - Safety requirements
RSS-248

Read from the A2LA scope document we downloaded on 2026-03-14. Register refreshed 2026-11-06.

Scope as published by A2LA

7 lines
A2LA

ISO/IEC 17025

Active

7711.01

The scope document we hold says it is valid until 2028-01-31.

View scope

Accredited scope, certificate 7711.01

LineMethodMatrixRange
1ISO/IEC 17025:2017; CFR 47, FCC Part 15 (using ANSI C63.4:2014); CFR 47, FCC Part 18 (using MP-5:1986); CISPR 11; EN 55011; BS EN 55011; AS CISPR 11; CISPR 14-1; EN IEC 55014-1; AS/NZS CISPR 14.1; AS CISPR 14.1; J 55014-1; BS EN IEC 55014-1; CISPR 15; AS/NZS CISPR 15; EN IEC 55015; BS EN IEC 55015; AS CISPR 15; J 55015; CISPR 32; AS/NZS CISPR 32; J 55032; EN 55032; BS EN 55032; VCCI V-3; VCCI V-4; ICES-001; ICES-003; ICES-005; IEC 61000-6-3; EN IEC 61000-6-3; AS/NZS 61000.6.3; BS EN IEC 61000-6-3; IEC 61000-6-4; EN IEC 61000-6-4; AS/NZS 61000.6.4; BS EN ICE 61000-6-4; EN IEC 61000-3-2; IEC 61000-3-2; JIS C61000-3-2; BS EN IEC 61000-3-2; EN 61000-3-3; IEC 61000-3-3; BS EN 61000-3-3; IEC 61000-3-11; EN IEC 61000-3-11; BS EN IEC 61000-3-11; IEC 61000-3-12; EN 61000-3-12; BS EN 61000-3-12; ECE R10 Rev.6; IEC 61000-4-13; EN 61000-4-13; BS EN 61000-4-13; IEC 61000-4-2; EN IEC 61000-4-2; BS EN IEC 61000-4-2--
2

Extracted from the scope document; tables may not line up. View scope for the original.

(A2LA Cert. No. 7711.01) 01/09/2026 Page 2 of 6 Test Technology: Test Method(s) 1: RF Electromagnetic Field (80 MHz to 6000 MHz ) EN IEC 61000-4-3; IEC 61000-4-3; BS EN IEC 61000-4-3 Electrical Fast Transient/Burst EN 61000-4-4; IEC 61000-4-4; BS EN 61000-4-4 Surge Immunity EN 61000-4-5; IEC 61000-4-5; BS EN 61000-4-5 Conducted Immunity EN IEC 61000-4-6; IEC 61000-4-6; BS EN IEC 61000-4-6 Power Frequency Magnetic Field Immunity EN 61000-4-8; IEC 61000-4-8; BS EN 61000-4-8 Voltage Dips, Short Interruptions, and Line Voltage Variations EN IEC 61000-4-11; IEC 61000-4-11; BS EN IEC 61000-4-11 Generic / Product Specific EMC Standards CISPR 14-2; EN IEC 55014-2; AS/NZS CISPR 14-2; BS EN IEC 55014-2; CISPR 16-2-1; SNZ AS/NZS CISPR 16.2.1; CISPR 16-2-3; CISPR 35; EN 55035; BS EN 55035; CISPR 24; EN 55024; BS EN 55024; IEC 61547; EN IEC 61547; BS EN IEC 61547; IEC 61000-6-1; EN IEC 61000-6-1; BS EN IEC 61000-6-1; AS/NZS 61000.6.1; IEC 61000-6-2; EN IEC 61000-6-2; BS EN IEC 61000-6-2; AS/NZS 61000.6.2; EN IEC 61326-1; BS EN IEC 61326-1; IEC 61326-1; EN IEC 61326-2-1; BS EN IEC 61326-2-1; EN IEC 61326-2-2; BS EN IEC 61326-2-2; EN IEC 61326-2-3; BS EN IEC 61326-2-3; EN IEC 61326-2-4; BS EN IEC 61326-2-4; EN IEC 61326-2-5; BS EN IEC 61326-2-5; EN IEC 61326-2-6; BS EN IEC 61326-2-6; IEC 60601-1-2; EN 60601-1-2; BS EN 60601-1-2; EN IEC 62040-2; BS EN IEC 62040-2; ETSI EN 300 386; ETSI EN 301 489-1; ETSI EN 301 489-3; ETSI EN 301 489-7; ETSI EN 301 489-9; ETSI EN 301 489-17; ETSI EN 301 489-19; ETSI EN 301 489-24; ETSI EN 301 489-34; EN 50498; BS EN 50498; IEC 61851-21-1; EN 61851-21-1; BS EN 61851-21-1; IEC 61851-21-2; EN IEC 61851-21-2; BS EN IEC 61851-21-2; EN 61851-23; BS EN 61851-23; IEC 61851-23; SAE J1772; IEC 62752; IEC 62955; ICES-GEN
3US / FCC CFR 47, FCC Part 15C (using ANSI C63.10:2020); CFR 47, FCC Part 15E (using ANSI C63.10:2020 and FCC KDB 905462 D02 (v02) April 08, 2016); Canada / ISED RSS-GEN; RSS-210 (≤ 40 GHz); RSS-216 (≤ 40 GHz); RSS-247 (with DFS); RSS-248; RSS-310; Australia AS/NZS 4268; European Union (EU)_RF ETSI EN 300 220-1; ETSI EN 300 220-2; ETSI EN 300 220-3-1; ETSI EN 300 220-3-2; ETSI EN 300 220-4; ETSI EN 300 330; ETSI EN 300 440; ETSI EN 300 422-1; ETSI EN 300 422-2; ETSI EN 300 328; ETSI EN 301 893; ETSI EN 302 502; ETSI EN 303 417; ETSI EN 303 413; ETSI EN 302 571; IEC 62479; EN 62479; IEC 62311; EN IEC 62311; BS EN IEC 62311; EN 50383; EN 50385; EN 50364; EN 50663; EN 50401; EN 50664; EN 50665; BS EN 62479; BS EN 50385; BS EN 50364; BS EN 50663; BS EN 50401; BS EN 50664; BS EN 50665; ISO 10605; SAE J1113/13_201502; CISPR 25:2021 (sections 4, 6.5); AS/NZS CISPR 25; J 55025; EN IEC 55025; BS EN IEC 55025; CISPR 25:2021 (sections 4, 6.3); AS/NZS CISPR 25; J 55025; EN IEC 55025; BS EN IEC 55025; CISPR 25:2021 (sections 4, 6.4); AS/NZS CISPR 25; J 55025; EN IEC 55025; BS EN IEC 55025Intentional and Unintentional Radiators; Electronic and Electrical Equipment; Automotiveto 40 GHz
4ISO 11452-1; ISO 11452-2; ISO 11452-4; ISO 11452-5; ISO 11452-8; ISO 7637-2; ISO 7637-3; ISO 7637-1; IEC 62368-1; EN IEC 62368-1; AS/NZS 62368.1; UL 62368-1; CAN/CSA-C22.2 No. 62368-1; BS EN IEC 62368-1; EN IEC 62477-1; IEC 62477-1; EN IEC 62477-2; IEC 62477-2; EN IEC 61851-1; IEC 61851-1; EN 61851-23; IEC 61851-23; EN IEC 61851-24; IEC 61851-24; EN IEC 61851-25; IEC 61851-25; ISO 17409; EN 60601-1; IEC 60601-1; ANSI/AAMI ES60601-1; CAN/CSA-C22.2 No. 60601-1; IEC 61010-1; EN 61010-1; BS EN 61010-1; EN 62109-1; IEC 62109-1; EN 62109-2; IEC 62109-2; UL 2202; UL 2231-1; UL 2231-2; UL 991; UL 1998-80 to 6 MHz to GHz
5ETSI TS 103 701 V1.1.1 (2021-08); EN 18031-1; EN 18031-2; EN 18031-3Industrial, Scientific, Medical (ISM), Information Technology Equipment (ITE), Network Equipment, Medical Electrical Equipment-
6ANSI C63.4:2014; FCC MP-5:1986; ANSI C63.10:2020; FCC KDB 905462 D02 (v02) April 08, 2016-to 40000 MHz
7

Extracted from the scope document; tables may not line up. View scope for the original.

For the tests to which this accreditation applies, please refer to the laboratory’s Electrical Scope of Accreditation. Accredited Laboratory A2LA has accredited MGT (HANGZHOU) TESTING TECHNOLOGY CO., LTD. Hangzhou, People’s Republic of China for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 9th day of January 2026. _______________________ Mr. Trace McInturff, Vice President, Accreditation Services For the Accreditation Council Certificate Number 7711.01 Valid to January 31, 2028

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Labs with overlapping accredited scope in China

Accreditation data refreshed from the A2LA register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.