Guangzhou Shuntai Quality Technical Service
Room 101, Building 1, No.63, Punan Road, Huangpu District, Guangzhou, Guangzhou, 510760, People's Republic of China, Guangzhou, China
Visit website- Accredited standards
- 100
- A2LA certificates
- 2
- Site in our directory
- 1
What this lab is accredited for
Our reading of the A2LA scope: each standard once, with its official name where we have checked it.
Only this lab. Searches the 100 standard numbers and the 57 official names we hold. When no standard matches, it searches the method text of every scope line.
ETSI35
ETSI EN 300 220-1
ETSI EN 300 220-2
ETSI EN 300 220-3-1
ETSI EN 300 220-3-2
ETSI EN 300 220-4
ETSI EN 300 328Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum
ETSI EN 300 330Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
ETSI EN 300 433
ETSI EN 300 440
ETSI EN 301 357-1
ETSI EN 301 489-1
ETSI EN 301 489-3
Show all 35
ETSI EN 301 489-5
ETSI EN 301 489-9
ETSI EN 301 489-13
ETSI EN 301 489-15
ETSI EN 301 489-17
ETSI EN 301 489-19
ETSI EN 301 489-34
ETSI EN 301 489-52
ETSI EN 301 489-53
ETSI EN 301 511Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
ETSI EN 301 893
ETSI EN 301 908-1
ETSI EN 301 908-2
ETSI EN 301 908-11
ETSI EN 301 908-13
ETSI EN 301 908-15
ETSI EN 302 208
ETSI EN 302 502
ETSI EN 303 340
ETSI EN 303 345-1
ETSI EN 303 413Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard for access to radio spectrum
ETSI EN 303 417
ETSI EN 303 609
IEC 61000 series13
IEC 61000-3-2Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
IEC 61000-3-3Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
IEC 61000-4-2Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-4Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 61000-4-5Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
IEC 61000-4-6Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-8Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-11Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
IEC 61000-6-1Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
IEC 61000-6-2Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 61000-6-3Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments
IEC 61000-6-4Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
ISO10
ISO 6742-1Cycles - Lighting and retro-reflective devices - Part 1: Lighting and light signalling devices
ISO 6742-2Cycles - Lighting and retro-reflective devices - Part 2: Retro-reflective devices
ISO 7637-2Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
ISO 7637-3Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
ISO 10605Road vehicles - Test methods for electrical disturbances from electrostatic discharge
ISO 11451-2Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources
ISO 13766-1Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions
ISO 14982Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
ISO 16505Road vehicles - Ergonomic and performance aspects of Camera Monitor Systems - Requirements and test procedures
ISO 20653Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access
CISPR8
CISPR 11Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement+1 national
National versions in the same scope
AS/NZS CISPR 11national version with changes
CISPR 12Vehicles, boats and devices with internal combustion engines or traction batteries - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
CISPR 14-1Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission+1 national
National versions in the same scope
AS/NZS CISPR 14.1national version with changes
CISPR 14-2Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard+1 national
National versions in the same scope
AS/NZS CISPR 14.2national version with changes
CISPR 15Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment+1 national
National versions in the same scope
AS/NZS CISPR 15national version with changes
CISPR 25Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
CISPR 32Electromagnetic compatibility of multimedia equipment - Emission requirements+1 national
National versions in the same scope
AS/NZS CISPR 32identical to it
CISPR 35Electromagnetic compatibility of multimedia equipment - Immunity requirements
EN7
EN 6100-4-4
EN 13309
EN 13766-2
EN 50121-3-2Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
EN 50155Railway applications - Rolling stock - Electronic equipment
EN 50498Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
EN 55121-3-2
IEC6
IEC 60529Degrees of protection provided by enclosures (IP Code)
IEC 60571
IEC 61547Equipment for general lighting purposes - EMC immunity requirements
IEC 62236-3-2
IEC 62311Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz)
IEC 62479Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
IEC 60068 series6
IEC 60068-2-1Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 60068-2-2Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-6Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-38Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
IEC 60068-2-64Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
IEC 60068-2-78Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
ISO 11452 series4
ISO 11452-2Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
ISO 11452-4Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
ISO 11452-8Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
ISO 11452-9Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters
ISO 16750 series4
ISO 16750-2Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
ISO 16750-3Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads
ISO 16750-4Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
ISO 16750-5Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads
EN 18031 series3
EN 18031-1
EN 18031-2
EN 18031-3
Other standards4
ANSI C63.10
FCC PART 15Radio Frequency Devices
RSS-220
SAE J575
RSS-220; RSS-222; RSS-236; RSS-247; RSS-248; RSS-252; RSS-310; ETSI EN 300 328; ETSI EN 303 413; ETSI EN 300 220-1; ETSI EN 300 220-2; ETSI EN 300 220-3-1; ETSI EN 300 220-3-2; ETSI EN 300 220-4; ETSI EN 300 330; ETSI EN 300 440; ETSI EN 301 893; ETSI EN 302 208; ETSI EN 303 340; ETSI EN 303 345-1; ETSI EN 303 417; ETSI EN 301 357; ETSI EN 302 502; ETSI EN 300 433; ETSI EN 301 511; ETSI EN 301 908-1; ETSI EN 301 908-2; ETSI EN 301 908-11; ETSI EN 301 908-13; ETSI EN 301 908-15; ETSI EN 303 609; IEC 62479; IEC 62311; EN 62479; EN 62311; BS EN 62479; BS EN IEC 62311; EN 18031-1; EN 18031-2; EN 18031-3; 47 Code of Federal Regulations; FCC KDB 974614, Appendix A, Table A.1; ANSI C63.4:2014; FCC MP-5:1986
CISPR 35; EN 55035; BS EN 55035; IEC 61547; EN IEC 61547; BS EN IEC 61547; CISPR 14-2; EN 55014-2; BS EN 55014-2; AS/NZS CISPR 14.2; J 55014-2; IEC 61000-6-3; EN 61000-6-3; BS EN IEC 61000-6-3; IEC 61000-6-4; EN 61000-6-4; BS EN IEC 61000-6-4; IEC 61000-6-1; EN 61000-6-1; BS EN IEC 61000-6-1; IEC 61000-6-2; EN 61000-6-2; BS EN IEC 61000-6-2; ETSI EN 301 489-1; ETSI EN 301 489-3; ETSI EN 301 489-5; ETSI EN 301 489-9; ETSI EN 301 489-13; ETSI EN 301 489-15; ETSI EN 301 489-17; ETSI EN 301 489-19; ETSI EN 301 489-34; ETSI EN 301 489-52; ETSI EN 301 489-53; ECE R116; ECE R10; CISPR 12; EN 55012; BS EN 55012; ISO 11451-2; EN 55121-3-2; BS EN 50121-3-2; IEC 62236-3-2; EN 50155; BS EN 50155; IEC 60571; CFR 47 FCC Part 15 Subpart B; CISPR 32; EN 55032; BS EN 55032
AS/NZS CISPR 32; ICES-003; J 55022; J 55032; VCCI V-3; ANSI C63.4:2014; CISPR 15; EN 55015; ICES-005; BS EN 55015; AS/NZS CISPR 15; J 55015; CISPR 14-1; EN 55014-1; BS EN 55014-1; AS/NZS CISPR 14.1; J 55014-1; FCC 47 CFR Part 18; MP-5:1986; ICES-001; CISPR 11; EN 55011; AS/NZS CISPR 11; BS EN 55011; IEC 61000-3-2; EN IEC 61000-3-2; BS EN IEC 61000-3-2; IEC 61000-3-3; EN 61000-3-3; BS EN IEC 61000-3-3; IEC 61000-4-2; EN 61000-4-2; BS EN 61000-4-2; IEC 61000-4-3; EN 61000-4-3; BS EN 61000-4-3; IEC 61000-4-4; EN 61000-4-4; BS EN 61000-4-4; FCC 47 CFR Part 15C; ANSI C63.10:2013; 47 CFR Part 15E; KDB Publication 905462 D02 (v02); 47 CFR Parts 15F/H; ANSI C63.10:2020; CFR 47. FCC Parts 22, 24, 25, 27, 73, 74, 96, 97 and 101; ANSI/TIA-603-E-2016; TIA-102.CAAA-E; ANSI C63.26-2015; RSS-Gen; RSS-111; RSS-112; RSS-119; RSS-125; RSS-130; RSS-132; RSS-133; RSS-134; RSS-137; RSS-139; RSS-142; RSS-192; RSS-194; RSS-195; RSS-197; RSS-198; RSS-199; RSS-210; RSS-213; RSS-216
ISO 11452-4; GB/T 33014.4; GB 34660; SAE J1113-4; ECE R10; ECE R116; EN 13309; ISO 13766-1; EN ISO 14982; ISO 10605 (2008); ISO 10605; GB/T 19951; SAE J1113-13; EN 13766-2; ISO 11452-2; GB/T 33014.2; ISO 11452-8; GB/T 33014.8; ISO 11452-9; GB/T 33014.9; ISO 16750-2; GB/T 28046-2; GB/T 21437-2; EN 50498; ISO 7637-2; ISO 7637-2:2004; SAE J1113-11; BS EN 6100-4-4; IEC 61000-4-5; EN 61000-4-5; BS EN 61000-4-5; IEC 61000-4-6; EN IEC 61000-4-6; BS EN IEC 61000-4-6; IEC 61000-4-8; EN 61000-4-8; BS EN 61000-4-8; IEC 61000-4-11; EN IEC 61000-4-11; BS EN IEC 61000-4-11
Australian Design Rule 49; Australian Design Rule 50; Australian Design Rule 52; Australian Design Rule 53; Australian Design Rule 46; Australian Design Rule 60; Australian Design Rule 74; Australian Design Rule 76; Australian Design Rule 86; GB 11554; GB 11564; GB 13954; GB 15235; GB 17509; GB 17510; GB 18099; GB 18408; GB 18409; GB 19152; GB 23255; GB 25991; GB 4660; GB 5920; GB/T 30511; GB/T 31887.1; GB/T 31887.2; ISO 6742-1; ISO 6742-2; SAE J131; SAE J1319; SAE J1383; SAE J1432; SAE J1623; SAE J1889; SAE J1957; SAE J2040; SAE J2041; SAE J2042; SAE J2087; SAE J2139; SAE J222; SAE J2261; SAE J2498; SAE J2650; SAE J575; SAE J578; SAE J581; SAE J582; SAE J583
ISO/IEC 17025:2017; GB 11564; ECE R150; ECE R3; Australian Design Rule 47; ISO 6742-2; USA-49 CFR 571.108; SAE J575; ISO 16750-5; ECE R149; SAE J2139; SAE J1889; Australian Design Rule 1; Australian Design Rule 6; Australian Design Rule 48
IEC 60068-2-38; GB/T 2423.34; IEC 60068-2-6; GB/T 2423.10; GB 13954; ECE R116; ECE R65; ISO 16750-4; GB/T 28046-4; GB 25991; Australian Design Rule 14; GB 11564; GB 15084; GB 17352; SAE J575; SAE J2139; UN R.003; UN R.046; UN R.081; UN R.150; ISO 6742-2; USA - 49 CFR 571.108; SAE J577; ISO 16750-3; IEC 60068-2-64; USA-49 CFR 571.302; UN R.118
CISPR 25; GB/T 18655; EN 55025; SAE J1113-41; ECE R10; ECE R116; EN 50498; EN 13309; GB 34660; ISO 13766-1; EN ISO 14982; ISO 7637-2; GB/T 21437-2; GB/T 28046.2; SAE J1113-11; ISO 7637-3; GB/T 21437-3; SAE J1113-12; EN 13766-2; ISO 11452-4; GB/T 33014.4; SAE J1113-4; ISO 16750-2
Australian Design Rule 14; GB 15084; GB 17352; UN R.046; UN R.081; SAE J575; SAE J2139; USA - 49 CFR 571.108; UN R.149; SAE J2261; SAE J1432; SAE J586; SAE J1957; UN R148; UN R38; UN R87; SAE J1054; SAE J1690; SAE J595; SAE J845; SAE J887; SAE J3155; ISO 16505
UN R.046; SAE J3155; ISO 16505
UN R.046; ISO 16505; SAE J3155; GB/T 10485; SAE J575; SAE J2139; SAE J1889; USA-49 CFR 571.108; ECE R149; GB/T 4208; GB 11564; GB 13954; IEC 60529; ISO 20653; ECE R116; ECE R150; ECE R3; ECE R65; Australian Design Rule 47 Signal V-16; Royal Decree 2822/1998, Annex XI; Title 13. Division 2. Charter 2. Article 22
GB/T 4208; GB/T 10485; GB 11564; GB 13954; SAE J575; SAE J2139; SAE J1889; USA-49 CFR 571.108; IEC 60529; ISO 20653; ECE R116; ECE R150; ECE R3; ECE R65; Australian Design Rule 47 Signal V-16, Royal Decree 2822/1998 Annex XI; SAE J575; SAE J2139; SAE J1889; USA-49 CFR 571.108; Title 13. Division 2. Charter 2. Article 22; GB/T 2423.1; GB/T 28046-4; GB 13954; IEC 60068-2-1; ISO 16750-4; ECE R116; ECE R65; Signal V-16, Royal Decree 2822/1998 Annex XI; Title 13. Division 2. Charter 2. Article 22; IEC 60068-2-2; ISO 16750-4; GB/T 2423.2; GB/T 28046-4; GB 11564; GB 13954; ECE R116; ECE R150; ECE R3; ECE R65; Signal V-16, Royal Decree 2822/1998 Annex XI; Title 13. Division 2. Charter 2. Article 22; IEC 60068-2-78; ISO 16750-4; GB/T 2423.3; GB/T 28046-4
ANSI C63.10:2013; ANSI C63.10:2020; FCC KDB 905462 D02 (v02); ANSI/TIA-603-E; ANSI/TIA-102.CAAA-E; ANSI C63.26:2015
Read from the A2LA scope documents we downloaded on 2026-03-14 and 2026-10-27. Register refreshed 2026-11-06.
Scope as published by A2LA
17 lines
ISO/IEC 17025
Active6320.01
The scope document we hold says it is valid until 2027-11-30.
ISO/IEC 17025
Active6320.02
The scope document we hold says it is valid until 2027-11-30.
Location
Room 101, Building 1, No.63, Punan Road, Huangpu District, Guangzhou, Guangzhou, 510760, People's Republic of China, Guangzhou, CN
23.11981, 113.31478
Open in MapsLabs with overlapping accredited scope in China
- Hangzhou TDT Technologies Co.,Hangzhou, ZhejiangA2LAShares 3 accredited test methodsANSI C63.10:2013CISPR 25CISPR 35
- DEKRA Testing and Certification (Shanghai)ShanghaiA2LAShares 2 accredited test methodsANSI C63.10:2013CISPR 25
- EMTEK (Shenzhen) Co.,Shenzhen, GuangdongA2LAShares 2 accredited test methodsANSI C63.10:2013CISPR 25
- Guangdong Dongdian Testing Service Co.,Dongguan City, Guangdong ProvinceA2LAShares 2 accredited test methodsCISPR 35ISO 11452-4
- DEKRA Testing and Certification (Shanghai) Ltd., Guangzhou BranchGuangzhou · under 1 kmA2LAShares 1 accredited test methodANSI C63.10:2013
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.