Sweden

Outokumpu Stainless

Bergsnäsgatan 11, 774 41, Avesta, Sweden

SWEDAC A000354-008ISO/IEC 17025Register refreshed 2026-11-08

One of 2 sites of this organization in our directory. View the organization

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

Free. No lab gets your details until you choose.

Accredited standards: 19
SWEDAC certificate: 1
Sites in our directory: 2

SWEDAC accredited scope

What this lab is accredited for

Our reading of the SWEDAC scope: each standard once, with its official name where we have checked it.

Search this lab’s scope for a standard or test

Only this lab. Searches the 19 standard numbers and the 16 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM12

ASTM A262Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products

ASTM A923Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

ASTM A1084

ASTM E10Standard Test Method for Brinell Hardness of Metallic Materials

ASTM E18Standard Test Methods for Rockwell Hardness of Metallic Materials

ASTM E21Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

ASTM E112Standard Test Methods for Determining Average Grain Size

ASTM E290Standard Test Methods for Bend Testing of Material for Ductility

ASTM E1245

ASTM G28

ASTM G48Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

ISO7

ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method

ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid

ISO 6506-1Metallic materials - Brinell hardness test - Part 1: Test method

ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method

ISO 6508-1Metallic materials - Rockwell hardness test - Part 1: Test method

ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature

ISO 6892-2Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature

Read from the scope as published by SWEDAC. Register refreshed 2026-11-08.

Scope as published by SWEDAC

2 lines

SWEDAC

ISO/IEC 17025

Active

A000354-008

View on SWEDAC

Accredited scope, certificate A000354-008

Line	Method	Matrix	Range
1	ASTM A370-24a; ASTM A923-23; ASTM E10-23; ASTM E18-24; ASTM E21-20; ASTM E290-22; SS-EN ISO 148-1:2016; SS-EN ISO 6506-1:2014; SS-EN ISO 6507-1:2018; SS-EN ISO 6508-1:2016; SS-EN ISO 6892-1:2019; SS-EN ISO 6892-2:2018; ASTM A1084-15a; ASTM A262-15	Metal	-
2	ASTM A923-23; ASTM G28-24; ASTM G48-11; SS-EN ISO 3651-2:1998; ASTM E112-24; ASTM E1245-03	Metalliska material	-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Bergsnäsgatan 11, Avesta, 774 41, SE

60.21667, 16.33333

Open in Maps

Other Locations

1 other site in this organization

Degerfors, SE

View

← All accredited testing labs in Sweden

Labs with overlapping accredited scope in Sweden

Accreditation data refreshed from the SWEDAC register on 2026-11-08.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the SWEDAC entry linked above.