Italy

Kiwa CERMET Italia S.p.A. con socio unico

Via Cadriano 23, 40057, Cadriano di Granarolo Emilia, Italy

ACCREDIA|00001ISO/IEC 17025Register refreshed 2026-09-25

Certificates

Scope items

Standards

Locations

One of 2 locations. View the organization

Free. We check which accredited labs can do it, starting with this one, and reply within two working days with who can do it, how fast, and roughly what it costs.

Only the laboratory you pick gets your contact details. We ask the others without them.

Contact this laboratory

Visit website Open ACCREDIA register entry

Work at Kiwa CERMET Italia S.p.A. con socio unico?

Claim this profile to keep it accurate.

Register record

ACCREDIARefreshed 2026-09-25: 00001Active

Accredited standards

Our reading of the ACCREDIA scope: each standard once, with its official name where we have checked it. Click a standard to see the scope line it comes from, word for word.

ISO

ISO 306Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

As written on the certificate · Line 3 (ACCREDIA 00001)

UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 6507-1:2023; ASTM E384-22; ASTM E92-23; ASTM E340-23; ASTM E3-11(2017) + ASTM E407-23; UNI EN ISO 6892-1:2020; ASTM E8/E8M-24; ASTM A370-24a; UNI EN ISO 306:2023; UNI EN ISO 1183-1:2019; UNI EN ISO 3451-1:2019; UNI EN ISO 11357-1:2023 + UNI EN ISO 11357-6:2018; UNI EN ISO 75-1:2020; UNI EN ISO 75-2:2013; UNI EN ISO 75-3:2004; UNI EN ISO 1133-1:2022; UNI EN ISO 527-1:2019 + UNI EN ISO 527-3:2019

ISO 527-1Plastics - Determination of tensile properties - Part 1: General principles

As written on the certificate · Line 3 (ACCREDIA 00001)

ISO 527-3Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets

As written on the certificate · Line 3 (ACCREDIA 00001)

ISO 580Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating

As written on the certificate · Line 4 (ACCREDIA 00001)

UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 11357-1:2023 + UNI EN ISO 11357-3:2018; UNI EN ISO 580:2005; UNI EN ISO 9080:2012; UNI EN ISO 19893:2018; ASTM B578-21; UNI EN ISO 1463:2021; DVGW W 542:2009 - solo/only Par. 4.5.9.4; UNI EN ISO 13257:2019; UNI EN ISO 13968:2009

ISO 1133-1Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method

As written on the certificate · Line 3 (ACCREDIA 00001)

ISO 1183-1Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method

As written on the certificate · Line 3 (ACCREDIA 00001)

ISO 1463Metallic and oxide coatings - Measurement of coating thickness - Microscopical method

As written on the certificate · Line 4 (ACCREDIA 00001)

ISO 2505Thermoplastics pipes - Longitudinal reversion - Test method and parameters

As written on the certificate · Line 5 (ACCREDIA 00001)

UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 11173:2018; UNI EN ISO 3127:2018; UNI EN ISO 2505:2023; UNI EN ISO 10147:2013; ISO 17456:2006; UNI EN ISO 2507-1:2018; UNI EN ISO 2507-2:2018; UNI EN ISO 2507-3:2018; ISO 13954:1997/Amd1:2020

ISO 3126Plastics piping systems - Plastics components - Determination of dimensions

As written on the certificate · Line 1 (ACCREDIA 00001)

UNI EN ISO 18203:2022; ASTM B557-15(2023); UNI EN ISO 3126:2005; UNI EN 10218-1:2012; ISO 13956:2010; UNI EN ISO 14801:2017; UNI 11153-1:2006; UNI 11153-2:2006; UNI 11153-3:2006; UNI EN ISO 6509-1:2014; ASTM B117-19

ISO 3127Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method

As written on the certificate · Line 5 (ACCREDIA 00001)

ISO 3451-1Plastics - Determination of ash - Part 1: General methods

As written on the certificate · Line 3 (ACCREDIA 00001)

ISO 3501Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force

As written on the certificate · Line 6 (ACCREDIA 00001)

UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 3503:2015; UNI EN ISO 3501:2022; UNI EN ISO 1167-1:2006; UNI EN ISO 1167-2:2006; UNI EN ISO 1167-3:2008; UNI EN ISO 1167-4:2008

ISO 3503Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending

As written on the certificate · Line 6 (ACCREDIA 00001)

UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 3503:2015; UNI EN ISO 3501:2022; UNI EN ISO 1167-1:2006; UNI EN ISO 1167-2:2006; UNI EN ISO 1167-3:2008; UNI EN ISO 1167-4:2008

ISO 6507-1Metallic materials - Vickers hardness test - Part 1: Test method

As written on the certificate · Line 3 (ACCREDIA 00001)

ISO 6509-1Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method

As written on the certificate · Line 1 (ACCREDIA 00001)

ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature

As written on the certificate · Line 3 (ACCREDIA 00001)

ISO 9080Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

As written on the certificate · Line 4 (ACCREDIA 00001)

ISO 9227Corrosion tests in artificial atmospheres - Salt spray tests

As written on the certificate · Line 2 (ACCREDIA 00001)

UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 9227:2024

ISO 10147Pipes and fittings made of crosslinked polyethylene (PE-X) - Estimation of the degree of crosslinking by determination of the gel content

As written on the certificate · Line 5 (ACCREDIA 00001)

ISO 11173Thermoplastics pipes - Determination of resistance to external blows - Staircase method

As written on the certificate · Line 5 (ACCREDIA 00001)

ISO 13257Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling

As written on the certificate · Line 4 (ACCREDIA 00001)

ISO 13954Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

As written on the certificate · Line 5 (ACCREDIA 00001)

ISO 13956Plastics pipes and fittings - Decohesion test of polyethylene (PE) saddle fusion joints - Evaluation of ductility of fusion joint interface by tear test

As written on the certificate · Line 1 (ACCREDIA 00001)

ISO 13968Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility

As written on the certificate · Line 4 (ACCREDIA 00001)

ISO 14801Dentistry - Implants - Dynamic loading test for endosseous dental implants

As written on the certificate · Line 1 (ACCREDIA 00001)

ISO 17456Plastics piping systems - Multilayer pipes - Determination of long-term strength

As written on the certificate · Line 5 (ACCREDIA 00001)

ISO 18203Steel - Determination of the thickness of surface-hardened layers

As written on the certificate · Line 1 (ACCREDIA 00001)

ISO 19893Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling

As written on the certificate · Line 4 (ACCREDIA 00001)

ASTM

ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products

As written on the certificate · Line 3 (ACCREDIA 00001)

ASTM B117Standard Practice for Operating Salt Spray (Fog) Apparatus

As written on the certificate · Line 1 (ACCREDIA 00001)

ASTM B557Name not checked yet

As written on the certificate · Line 1 (ACCREDIA 00001)

ASTM B578Name not checked yet

As written on the certificate · Line 4 (ACCREDIA 00001)

ASTM E3Standard Guide for Preparation of Metallographic Specimens

As written on the certificate · Line 3 (ACCREDIA 00001)

ASTM E8Standard Test Methods for Tension Testing of Metallic Materials

As written on the certificate · Line 3 (ACCREDIA 00001)

ASTM E92Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

As written on the certificate · Line 3 (ACCREDIA 00001)

ASTM E340Standard Practice for Macroetching Metals and Alloys

As written on the certificate · Line 3 (ACCREDIA 00001)

ASTM E384Standard Test Method for Microindentation Hardness of Materials

As written on the certificate · Line 3 (ACCREDIA 00001)

ASTM E407Standard Practice for Microetching Metals and Alloys

As written on the certificate · Line 3 (ACCREDIA 00001)

ISO 1167 series

ISO 1167-1Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method

As written on the certificate · Line 6 (ACCREDIA 00001)

UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 3503:2015; UNI EN ISO 3501:2022; UNI EN ISO 1167-1:2006; UNI EN ISO 1167-2:2006; UNI EN ISO 1167-3:2008; UNI EN ISO 1167-4:2008

ISO 1167-2Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces

As written on the certificate · Line 6 (ACCREDIA 00001)

UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 3503:2015; UNI EN ISO 3501:2022; UNI EN ISO 1167-1:2006; UNI EN ISO 1167-2:2006; UNI EN ISO 1167-3:2008; UNI EN ISO 1167-4:2008

ISO 1167-3Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components

As written on the certificate · Line 6 (ACCREDIA 00001)

UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 3503:2015; UNI EN ISO 3501:2022; UNI EN ISO 1167-1:2006; UNI EN ISO 1167-2:2006; UNI EN ISO 1167-3:2008; UNI EN ISO 1167-4:2008

ISO 1167-4Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies

As written on the certificate · Line 6 (ACCREDIA 00001)

UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 3503:2015; UNI EN ISO 3501:2022; UNI EN ISO 1167-1:2006; UNI EN ISO 1167-2:2006; UNI EN ISO 1167-3:2008; UNI EN ISO 1167-4:2008

ISO 11357 series

ISO 11357-1Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles

As written on the certificate · Line 3 (ACCREDIA 00001)

As written on the certificate · Line 4 (ACCREDIA 00001)

ISO 11357-3Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization

As written on the certificate · Line 4 (ACCREDIA 00001)

ISO 11357-6Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

As written on the certificate · Line 3 (ACCREDIA 00001)

ISO 2507 series

ISO 2507-1Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method

As written on the certificate · Line 5 (ACCREDIA 00001)

ISO 2507-2Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes

As written on the certificate · Line 5 (ACCREDIA 00001)

ISO 2507-3Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

As written on the certificate · Line 5 (ACCREDIA 00001)

ISO 75 series

ISO 75-1Plastics - Determination of temperature of deflection under load - Part 1: General test method

As written on the certificate · Line 3 (ACCREDIA 00001)

ISO 75-2Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite

As written on the certificate · Line 3 (ACCREDIA 00001)

ISO 75-3Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics

As written on the certificate · Line 3 (ACCREDIA 00001)

Other standards

EN 10218-1Name not checked yet

As written on the certificate · Line 1 (ACCREDIA 00001)

Scope as published by ACCREDIA

6 lines

ACCREDIA

ISO/IEC 17025

Active

00001

View scope

Accredited scope, certificate 00001

Line	Discipline	Method	Matrix	Range
1	materials	UNI EN ISO 18203:2022; ASTM B557-15(2023); UNI EN ISO 3126:2005; UNI EN 10218-1:2012; ISO 13956:2010; UNI EN ISO 14801:2017; UNI 11153-1:2006; UNI 11153-2:2006; UNI 11153-3:2006; UNI EN ISO 6509-1:2014; ASTM B117-19	Acciai/Steels; Alluminio/Aluminium, Leghe d'alluminio/Aluminium alloys; Componenti di materiale plastico/Plastics components; Filo di acciaio e relativi prodotti/Steel wire and wire products; Giunti a fusione a sella in polietilene (PE)/Polyethylene (PE) saddle fusion joints; Impianti dentali intraossei/Endosseeous dental implants; Leghe di ferro/Iron alloys; Leghe di rame/Copper alloys; Materiali metallici e loro rivestimenti (organici ed inorganici)/Metallic materials and organic and inorganic coatings; Materiali metallici/Metallic materials, Rivestimenti metallici su substrati metallici/Metallic coatings on metallic substrates	to 250 kN
2	materials	UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 9227:2024	Materiali metallici ferrosi e non ferrosi/Ferrous and not ferrous metallic materials	-
3	materials	UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 6507-1:2023; ASTM E384-22; ASTM E92-23; ASTM E340-23; ASTM E3-11(2017) + ASTM E407-23; UNI EN ISO 6892-1:2020; ASTM E8/E8M-24; ASTM A370-24a; UNI EN ISO 306:2023; UNI EN ISO 1183-1:2019; UNI EN ISO 3451-1:2019; UNI EN ISO 11357-1:2023 + UNI EN ISO 11357-6:2018; UNI EN ISO 75-1:2020; UNI EN ISO 75-2:2013; UNI EN ISO 75-3:2004; UNI EN ISO 1133-1:2022; UNI EN ISO 527-1:2019 + UNI EN ISO 527-3:2019	Materiali termoplastici/Thermoplastic materials; Materie plastiche non alveolari /Non-cellular plastics; Materie plastiche/Plastics	to 250 kN
4	materials	UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 11357-1:2023 + UNI EN ISO 11357-3:2018; UNI EN ISO 580:2005; UNI EN ISO 9080:2012; UNI EN ISO 19893:2018; ASTM B578-21; UNI EN ISO 1463:2021; DVGW W 542:2009 - solo/only Par. 4.5.9.4; UNI EN ISO 13257:2019; UNI EN ISO 13968:2009	Raccordi di materiale termoplastico/Thermoplastics fittings; Tubi di materiale termoplastico/Thermoplastics pipes; Rivestimenti metallici/Metallic coatings; Strati di ossido/Oxide coatings; Tubi compositi multistrato/Multilayer composite pipes	-
5	materials	UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 11173:2018; UNI EN ISO 3127:2018; UNI EN ISO 2505:2023; UNI EN ISO 10147:2013; ISO 17456:2006; UNI EN ISO 2507-1:2018; UNI EN ISO 2507-2:2018; UNI EN ISO 2507-3:2018; ISO 13954:1997/Amd1:2020	Tubi di materiale termoplastico/Thermoplastics pipes; Tubi e raccordi in materiale plastico/Plastic pipes and fittings; Tubi e raccordi in polietilene (PE)/Polyethylene (PE) pipes and fittings	-
6	materials	UNI CEI EN ISO/IEC 17025:2018; UNI EN ISO 3503:2015; UNI EN ISO 3501:2022; UNI EN ISO 1167-1:2006; UNI EN ISO 1167-2:2006; UNI EN ISO 1167-3:2008; UNI EN ISO 1167-4:2008	Tubi, raccordi e assiemi in materiale termoplastico per il trasporto di fluidi/Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - solo/only per tubi fino a diametro 32 mm; Tubi, raccordi e assiemi in materiale termoplastico per il trasporto di fluidi/Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - solo/only Sistemi di tubazioni di materia plastica UNI 9561, UNI 11344, UNI EN ISO 21003, UNI EN ISO 15874, UNI EN ISO 15875 , UNI EN ISO 15876, UNI EN ISO 15877, UNI EN ISO 22391, WRAS test & acceptance criteria 1314-1, 1314-7, 1314-8, 1314-9, 1314-10, 1314- 11, 1314-12, 1314-13, 1314-14, 1314-15, DVGW GW335-A2, DVGW GW335-A3, DVGW GW335-B2; Tubi, raccordi e assiemi in materiale termoplastico per il trasporto di fluidi/Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - solo/only Tubi, raccordi e assiemi di materiale termoplastico per il trasporto di fluidi UNI EN12201, UNI EN 1555, UNI EN ISO 15874, UNI EN ISO 15875 , UNI EN ISO 15876, UNI EN ISO 15877, UNI EN ISO 21003, UNI EN 1329,UNI 10954, UNI EN 1401, UNI 11344, UNI 10655, , EN331, EN13828, UNI EN 12729, UNI EN 13959, UNI 1567, UNI EN 1213, UNI EN 15266, UNI EN 1488, EN14141, EN13774, ISO 4427, ISO 4437, DVGW GW335-A1, DVGW GW335-A2, DVGW GW335-A3, DVGW GW335-B2, DVGW W542, DVGW W544	to 32 mm

Ranges are reproduced from the accredited scope document as published. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Via Cadriano 23, Cadriano di Granarolo Emilia, 40057, IT

44.55048, 11.39986

Open in Maps

Other Locations

1 other site in this organization

Padova, IT

View

← All accredited testing labs in Italy

Labs with overlapping accredited scope in Italy

Accreditation data refreshed from the ACCREDIA register on 2026-09-25.

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the ACCREDIA entry linked above.