Registers refreshed 2026-11-08.See refresh dates
United Kingdom

Tata Steel UK Limited trading as Tata Steel Group Health Safety and Environment

Tata Steel, HSSE Building, Port Talbot Works, Port Talbot, SA13 2NG, South Wales, United Kingdom

Visit website
UKAS 0312ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
11
UKAS certificate
1
Site in our directory
1
UKAS accredited scope

What this lab is accredited for

Our reading of the UKAS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 11 standard numbers and the 10 official names we hold. When no standard matches, it searches the method text of every scope line.

EN11
EN 1911-1
EN 1948-1Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
EN 12619Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
EN 13211Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
EN 13284-1Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 14181Stationary source emissions - Quality assurance of automated measuring systems
EN 14385Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
EN 14789Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
EN 14792Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: Chemiluminescence
EN 15058Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
EN 15259Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report

Read from the scope as published by UKAS. Register refreshed 2026-11-06.

Scope as published by UKAS

5 lines
UKAS

ISO/IEC 17025

Active

0312

View scope

Accredited scope, certificate 0312

LineMethodMatrixRange
1ISO/IEC 17025:2017Steel-
2BS EN 13284-1:2017; ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2; ISO/IEC 17025; ISO/IEC 17025 Accredited Laboratory BS EN 13284-1:2017; IEC 17025Steel-
3BS EN 15259:2007 Total Particulate Matter BS EN 13284-1:2017; BS EN 1911-1:2010; BS EN 14385:2024; BS EN 13211:2001; BS EN 1948-1:2006Drinking water-
4BS EN 15259:2007; BS EN 15058:2017; BS EN 14792:2017; BS EN 14789:2017; ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2Steel-
5BS EN 15259:2007; BS EN 12619:2013; BS EN 14181:2014; ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2; IEC 17025Steel0 to 1000 mg/m³

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Tata Steel, HSSE Building, Port Talbot Works, Port Talbot, South Wales, SA13 2NG, GB

51.68086, -3.13051

Open in Maps
← All accredited testing labs in United Kingdom

Labs with overlapping accredited scope in United Kingdom

Accreditation data refreshed from the UKAS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the UKAS entry linked above.