Summit City Precision Machining
Fort Wayne, IN, United States
- Scope lines
- 3
- A2LA certificate
- 1
- Sites in our directory
- 2
What this lab is accredited for
We could not match the method references in this lab’s scope to published test standard numbers. The full scope as published is below.
Only this lab. Searches the method, matrix and range of each of the 3 scope lines.
A2LA certificate 6127.01 · 3 lines
| Line | Method | Matrix | Range |
|---|---|---|---|
| 1 | ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1-1994 | - | - |
| 2 | Extracted from the scope document; tables may not line up. View scope for the original. A2LA Cert. No. 6127.01) Revised 12/10/2025 Page 2 of 2
2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement
that a laboratory can achieve within its scope of accreditation when performing more or less routine
calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent
expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage
factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory
may be greater than the CMC due to the behavior of t he customer’s device and to influences from the
circumstances of the specific calibration.
3 In the statement of CMC, L is the numerical value of the nominal length of the device measured in inches
or meters.
4
This scope meets A2LA’s P112 Flexible Scope Policy. | ||
| 3 | ISO/IEC 17025:2017; ANSI/NCSL Z540-1-1994; R205 | - | - |
Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.
Location
Other Locations
1 other site in this organization
Labs with overlapping accredited scope in United States
- ENI LabsFort Wayne, IN · under 1 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Tri-State Instrument ServiceFort Wayne, IN · under 1 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Richard J. Bagan, Inc. D.B.A. Montech USAColumbia City, IN · ~31 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Consumers Energy/Laboratory ServicesJackson, MI · ~142 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
- Instrument Calibration SolutionsClayton, OH · ~150 kmA2LAShares 1 accredited test methodANSI/NCSL Z540-1-1994
Accreditation data refreshed from the A2LA register on .
This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the A2LA entry linked above.