Registers refreshed 2026-11-08.See refresh dates
Germany

Stahlwerk Thüringen GmbH Werkstoffprüfung

Kronacher Straße 6, 07333, Unterwellenborn, Germany

DAKKS D-PL-17748-01-00DAKKS D-PL-17748-01-01ISO/IEC 17025Register refreshed 2026-11-06

We check which accredited labs can do it, starting with this one, and send you a short comparison of time and rough cost within three working days.

  • Free. No lab gets your details until you choose.
Accredited standards
4
DAKKS certificates
2
Site in our directory
1
DAKKS accredited scope

What this lab is accredited for

Our reading of the DAKKS scope: each standard once, with its official name where we have checked it.

Only this lab. Searches the 4 standard numbers and the 3 official names we hold. When no standard matches, it searches the method text of every scope line.

ASTM D7582
ISO 148-1Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 6892-1Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 15350Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method)

Read from the scope as published by DAKKS. Register refreshed 2026-11-06.

Scope as published by DAKKS

5 lines
DAKKS

ISO/IEC 17025

Active

D-PL-17748-01-00

View scope

Accredited scope, certificate D-PL-17748-01-00

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--
2DIN EN ISO 6892-1 Metallische Werkstoffe - Zugversuch - Teil 1: Prüfverfahren bei Raum- 2020-06; DIN EN ISO 148-1 2017-05 DIN EN ISO 15350 2010-08 Metallische Werkstoffe - Kerbschlagbiegeversuch nach Charpy - Teil 1; ISO 6892-1 Metallische Werkstoffe - Zugversuch - Teil 1: Prüfverfahren bei Raum- 2020-06; ISO 148-1 2017-05 DIN EN ISO 15350 2010-08 Metallische Werkstoffe - Kerbschlagbiegeversuch nach Charpy - Teil 1; ISO International Organization for Standardization QS-WP Hausverfahren der Stahlwerk Thüringen GmbH Gültig ab: 01Metal-

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

DAKKS

ISO/IEC 17025

Active

D-PL-17748-01-01

View scope

Accredited scope, certificate D-PL-17748-01-01

LineMethodMatrixRange
1DIN EN ISO/IEC 17025:2018--
2DIN EN ISO 6892-1; DIN EN ISO 148-1; DIN EN ISO 15350; ASTM D7582metallic materials; Steel and iron; Coal and Coke-
3ASTM; DIN; EN; IEC; ISO--

Ranges are reproduced from the accredited scope document as published, and only where we found that range printed in the document for the line. Otherwise the cell reads “See scope document”. An absent range means the register did not state one. Line numbers are ours, for cross-reference; they follow the order of the scope document.

Location

Kronacher Straße 6, Unterwellenborn, 07333, DE

50.65568, 11.43978

Open in Maps
← All accredited testing labs in Germany

Labs with overlapping accredited scope in Germany

Accreditation data refreshed from the DAKKS register on .

This page mirrors a public register. For a purchasing, audit or regulatory decision, confirm against the DAKKS entry linked above.