19 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform EN 1097-5 testing. These labs commonly handle Drinking water matrices. Most frequently tested analytes via this method in United Kingdom: Particle Size Distribution, Water Content. From the accredited scope text: “EN 1097-5: 2008 Laboratory Sample reduction using a riffle box BS EN 932-2: 1999 Laboratory, Site Sample reduction by quartering BS EN 932-2: 1999 Laboratory, Site BITUMINOUS MIXTURES for roads and ot” “EN 1097-5:2008 Brigstock Resistance to fragmentation by the Los Angeles Method BS EN 1097-2:2020 Brigstock Sample reduction using a riffle box BS EN 932-2:1999 Brigstock & Site Sample reduction by qua” “EN 1097-5:2008 A CONCRETE - fresh Sampling - composite sample - spot sample BS EN 12350-1:2019 B Slump BS EN 12350-2:2019 B Degree of Compactability BS EN 12350-4:2019 B Air content - pressure method” “EN 1097-5 :2008 Laboratory Particle density and water absorption - wire basket method for aggregate particles between 31.5 and 63 mm BS EN 1097-6 :2022 Laboratory Particle density and water absorption”
North Lincolnshire, GB
EN 1097-5:2008 Laboratory Magnesium Sulphate Tests BS EN 1367-2:2009 Laboratory Uniformity coefficient Specification for Highway Works table 6/1 footnote 5 Laboratory BITUMINOUS MIXTURES for roads and other pave
London, GB
EN 1097-5:2008 Laboratory Sample Reduction: - by riffle box - by quartering - to a test portion of a specified mass within a small tolerance BS EN 932-2:1999 Laboratory Particle size distribution BS EN 933-1:2012 Laborat
Huntingdon, GB
EN 1097-5:2008 A Magnesium sulfate test BS EN 1367-2:2009 A
Kent, GB
EN 1097-5:2008 Lenham CONCRETE - hardened Compressive strength of concrete cubes, including curing BS EN 12390-3:2019 Lenham Curing (initial curing in air, then in water at 20°C) BS EN 12390-2:2019 Lenham Densi
Bridgend, GB
EN 1097-5:2008 Lab Uniformity coefficient Specification for Highway Works Series 600; Table 6- 1; Footnote 5 Lab CONCRETE - fresh Sampling fresh concrete on site - composite sample - spot sample BS EN 12350-1:2009 Site
Warrington, GB
EN 1097-5:2008 A END
Northamptonshire, GB
EN 1097-5:2008 Brigstock Resistance to fragmentation by the Los Angeles Method BS EN 1097-2:2020 Brigstock Sample reduction using a riffle box BS EN 932-2:1999 Brigstock & Site Sample reduction by quartering
Southampton, GB
EN 1097-5:2023 B Magnesium sulfate test BS EN 1367-2:2009 B
Dukinfield, GB
EN 1097-5:2008 Laboratory BITUMINOUS MIXTURES for roads and other paved areas Soluble binder content by recovery, using bottle rotation machine, bucket centrifuge type 1 and volume calculation BS EN 12697-1:2020 Labor
Kent, GB
EN 1097-5:2008 A Uniformity Coefficient BS EN ISO 14688-2:2018 A CONCRETE - hardened Shape and dimensions of cube specimens BS EN 12390-1:2021 A Curing cube specimens for str
London, GB
EN 1097-5 :2008 Laboratory Particle density and water absorption - wire basket method for aggregate particles between 31.5 and 63 mm BS EN 1097-6 :2022 Laboratory Particle density and water absorption - pyknometer met
West Yorkshire, GB
EN 1097-5:2008 Laboratory Particle density and water absorption - particles between 4 mm and 31.5 mm BS EN 1097-6:2013 Clause 8 Laboratory Particle density and water absorption - particles between 0.063 mm and 4 mm BS EN
Ashover, GB
EN 1097-5:2008 A Determination of Particle Size Distribution BS EN 933-1:2012 A Reducing laboratory samples of aggregates to test portions BS EN 932-2:1999 X Sampling – from stockpiles BS EN 932-1:1997
Ashburton, GB
EN 1097-5: 2008 Laboratory Sample reduction using a riffle box BS EN 932-2: 1999 Laboratory, Site Sample reduction by quartering BS EN 932-2: 1999 Laboratory, Site BITUMINOUS MIXTURES for roads and other
Northern Ireland, GB
EN 1097-5:2008 A
Coventry, GB
EN 1097-5:2008 ROCK Point load strength and anisotropy indices ISRM Commission on Testing Methods. Suggested Method for Determining Point Load Strength 1985 Water content – method 1 International Society for Rock Mechanics
Durham, GB
EN 1097-5:2008 A Particle density and water absorption - wire-basket method for aggregate particles passing the 63 mm sieve and retained on the 31,5 mm sieve BS EN 1097-6:2022 A Particle density and water
Kent, GB
EN 1097-5:2008 A CONCRETE - fresh Sampling - composite sample - spot sample BS EN 12350-1:2019 B Slump BS EN 12350-2:2019 B Degree of Compactability BS EN 12350-4:201
Liverpool, GB
EN 1097-5:2008 Laboratory CONCRETE – fresh Sampling fresh concrete on site - composite sample - spot sample BS EN 12350-1: 2019 Site Slump BS EN 12350-2: 2019 Site Making cubic specimens for strength tests including
This page is a fixed slice of the register: every EN 1097-5 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.