26 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform EN 13036-1 testing. These labs commonly handle Drinking water, Concrete, Oil matrices. Most frequently tested analytes via this method in United Kingdom: Water Content, Moisture Content. From the accredited scope text: “EN 13036-1:2010 Site Surface regularity using a rolling straight-edge Specification for Highway Works HMSO February 2016 Clause 702 Site Surface regularity using a rolling straight-edge TRRL Supplemen” “EN 13036-1: 2010 Site” “EN 13036-1:2010 Site Surface regularity using a rolling straight-edge TRRL 290 Site Core Logging Design Manual for Roads and Bridges, CS 229 Revision 0, March 2020. Laboratory” “EN 13036-1: 2010 Site Measurement of slip/skid resistance of surface by means of the pendulum tester BS EN 13036-4: 2011 Site Surface friction of pavements – measurement of surface skid resistance usi”
East Kilbride, GB
EN 13036-1:2010 X Surface regularity using a rolling straight-edge TRRL Supplementary Report 290:1977 X Core logging Design Manual for Roads and Bridges CS229 rev. 0 March 2020 A SOILS for civil engine
Hertfordshire, GB
EN 13036-1:2010 Site Texture depth - by the sand-patch method BS 598-105:2000 Site ROAD PAVEMENT SURFACES Measurement of slip/skid resistance of a surface – The pendulum test BS EN 13036-4:2011 Site SOILS Bearing c
Hertfordshire, GB
EN 13036-1:2010 Site Surface regularity using a rolling straight-edge Specification for Highway Works HMSO February 2016, Clause 702, TRRL Supplementary Report 290:1977 Site Core Logging Manual for Roads and Bridges,
Co. Fermanagh, GB
EN 13036-1:2010 B Surface regularity using a rolling straight-edge Specification for Highway Works, HMSO February 2016 Clause 702, TRRL Supplementary Report 290:1977 and UKAS Publication TPS 25 B Compacted density – us
Dorset, GB
EN 13036-1:2010 B, X Macrotexture depth - volumetric patch technique Specification for Highway Works, HMSO May 2001 Clause 1031 B, X Surface regularity using a rolling straight-edge TRRL Supplementary Report 290:1977 B
Newcastle Upon Tyne, GB
EN 13036-1:2010 Site Surface regularity using a rolling straight-edge Specification for Highway Works HMSO February 2016 Clause 702 (TRRL Supplementary Report 290:1977) Site END
Cheshire, GB
EN 13036-1: 2010 Site Measurement of slip/skid resistance of surface by means of the pendulum tester BS EN 13036-4: 2011 Site Surface friction of pavements – measurement of surface skid resistance using the grip tes
Staffordshire, GB
EN 13036-1:2010 Site Surface regularity using a rolling straight-edge DIHM 121, Specification for Highway Works, HMSO November 2016, Clause 702 Site SOILS for civil engineering purposes Moisture content - oven drying me
Falkirk, GB
EN 13036-1:2010 Site Surface regularity using a rolling straight-edge. Specification for Highway Works. February 2016 Clause 702 TRRL SR90 Site REINSTATEMENT OF OPENINGS IN HIGHWAYS Pavement construction Methods o
Derby, GB
EN 13036-1:2010 X Surface regularity using a rolling straight-edge MCHW SHW HMSO Clause 702 (TRRL Supplementary Report 290:1977) X CONCRETE - fresh Sampling fresh concrete on site - composite sample - spot sample
Leicester, GB
EN 13036-1: 2010 Site
Sittingbourne, GB
EN 13036-1:2010 B BITUMINOUS ROAD SURFACING In-situ density - dielectric method BS 594987:2024 Annex I and Documented In-House Method STPB6 B In-situ density - non-nuclear method BS 594987:2024 Annex I and Doc
Kent, GB
EN 13036-1:2010 Site Surface regularity using a rolling straight-edge TRRL 290 Site Core Logging Design Manual for Roads and Bridges, CS 229 Revision 0, March 2020. Laboratory
Glasgow, GB
EN 13036-1:2010 X Surface regularity using a rolling straight-edge TRRL Supplementary Report 290:1977 X
Gwynedd, GB
EN 13036-1:2010 B Slip/skid resistance of a surface - the pendulum test BS EN 13036-4:2011 B Surface regularity using a rolling straight-edge Specification for Highway Works, February 2016 Clause 702 B Concrete su
Glasgow, GB
EN 13036-1:2010 X END
Ashover, GB
EN 13036-1:2010 X Determination of in-situ density – non nuclear method BS EN 594987:2015 +A1:2017 ANNEX 1 X Core Logging Design manual for roads and bridges, CS229 Revision 0, March 2020 A, X Surface regulari
East Goscote, GB
EN 13036-1:2010 Site Surface regularity using a rolling straight-edge TRRL Supplementary Report 290:1977 Site Core Logging Design Manual for Roads and Bridges, CS 229 Revision 0, March 2020 Leicester BI
Hertfordshire, GB
EN 13036-1:2010 B Slurry surfacing – visual assessment of defects BS EN 12274-8:2005 B Surface dressing – visual assessment of defects BS EN 12272-2:2003 B Surface friction of pavements (Griptester) BS 7941-2
Ashburton, GB
EN 13036-1: 2010 Site END
Northern Ireland, GB
EN 13036-1:2010 S Surface regularity using a rolling straight-edge Specification for Highway Works Series 700 – clause 702(NI) (TRRL Supplementary Report 290:1977) S SOILS for civil engineering purposes California
Northern Ireland, GB
EN 13036-1:2010 S SOILS for civil engineering purposes Moisture content MCV (Natural Moisture Content) Plastic limit BS 1377-2:1990 BS 1377-4:1990 BS 1377-2:2022 A S A Liquid limit (fall cone
Devon, GB
EN 13036-1:2010 Site Surface regularity using a rolling straight-edge Specification for Highway Works HMSO February 2016 Clause 702 Site Surface regularity using a rolling straight-edge TRRL Supplementary Report 290:1
Bristol, GB
EN 13036-1:2010 C
Kent, GB
EN 13036-1:2010 B SOILS for civil engineering purposes Water content – oven drying method BS 1377-2:2022 A Determination of the vertical deformation and strength characteristics of soil by
Birmingham, GB
EN 13036-1:2010 Site Concrete Surface Regularity (Straight Edge Test) BS EN 13036-7:2003 Defence Estates Specifications: 33 Appendix B: April 2017 Site END
This page is a fixed slice of the register: every EN 13036-1 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.