EN 13286, all parts: Unbound and hydraulically bound mixtures26 laboratories in United Kingdom are accredited by UKAS for at least one part of EN 13286. Each lab card shows which parts it holds. These labs commonly handle Drinking water, Water, Oil matrices. Most frequently tested analytes via this method in United Kingdom: Water Content, Moisture Condition Value, Liquid Limit. From the accredited scope text: “EN 13286-4:2003 X Determination of compressive strength of hydraulically bound mixtures – including curing BS EN 13286-41:2003 X Degree of Pulverisation BS EN 13286-48:2005 X Manufacture of tests spec” “EN 13286-2:2010 Bellshill Daventry Laboratory reference density and water content – Vibrating hammer BS EN 13286-4:2021 Bellshill Daventry Test method for the determination of the moisture condition v” “EN 13286-4: 2021 Lab SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2: 1990 Lab Water content - oven drying method BS 1377-2: 2022 BSEN ISO 17892-1:2014+A1:2022 Lab” “EN 13286-4:2021 A, X WATERS - ground water, waste water and effluent Conductivity Documented In-House Method In-situ Works Procedures Manual Section 6 No 10 B Dissolved oxygen content Documented In-Ho”
Merseyside, GB
EN 13286-2:2010 A Laboratory reference density and water content – Proctor compaction : Modified Proctor test BS EN 13286-2:2010 A UNBOUND AND HYDRAULICALLY BOUND MIXTURES Degree of pulverisation Labora
Tyne & Wear, GB
EN 13286-4:2021 A END
London, GB
EN 13286-4:2021 Laboratory
Doncaster, GB
EN 13286-46: 2003 Laboratory Site California bearing ratio, Immediate bearing index and linear swelling BS EN 13286-47:2021 Laboratory END
Hertfordshire, GB
EN 13286-46:2003 D, Site Laboratory reference density and water content - proctor compaction BS EN 13286-2:2010 B, D Laboratory reference density and water content - vibrating hammer BS EN 13286-4:2021 B, D Moisture co
Co. Fermanagh, GB
EN 13286-41:2021 A END
Dorset, GB
EN 13286-4:2021 A, X WATERS - ground water, waste water and effluent Conductivity Documented In-House Method In-situ Works Procedures Manual Section 6 No 10 B Dissolved oxygen content Documented In-House Method In-situ Wo
Scotland, GB
EN 13286-2:2010 Bellshill Daventry Laboratory reference density and water content – Vibrating hammer BS EN 13286-4:2021 Bellshill Daventry Test method for the determination of the moisture condition value BS EN 13286
Dukinfield, GB
EN 13286-4:2021 Laboratory Moisture condition value (MCV) - natural moisture content BS EN 13286-46:2003 Laboratory California bearing ratio BS EN 13286-47:2021 Laboratory END
Kent, GB
EN 13286-4:2021 A END
London, GB
EN 13286-4 :2021 Laboratory CONCRETE - fresh Sampling fresh concrete on site - composite sample - spot sample BS EN 12350-1:2019 Site Making cubic specimens for strength tests – including curing BS EN 12350-2
Staffordshire, GB
EN 13286-4:2003 X Determination of compressive strength of hydraulically bound mixtures – including curing BS EN 13286-41:2003 X Degree of Pulverisation BS EN 13286-48:2005 X Manufacture of tests specimens
Derby, GB
EN 13286-41:2021 A Manufacture of cubic specimens – vibrating hammer BS EN 13286-51:2004 X END
Leicester, GB
EN 13286-4: 2021 Lab SOILS for civil engineering purposes Moisture content - oven drying method BS 1377-2: 1990 Lab Water content - oven drying method BS 1377-2: 2022 BSEN ISO 17892-1:2014+A1:2022 Lab Liquid li
Sittingbourne, GB
EN 13286-1:2021 BS EN 13286 – 4:2021 B A MCV – natural moisture content BS EN 13286 – 46:2003 A, B Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction BS
Durham, GB
EN 13286-4:2003 A END
West Yorkshire, GB
EN 13286-4:2021 Laboratory Determination of Degree of Pulverization BS EN 13286-48:2005 Site END
Bristol, GB
EN 13286-2:2010 Laboratory Test method for the determination of California bearing ratio, immediate bearing index and linear swelling EN 13286-47:2021 Laboratory End of Bristol Laboratory
Gwynedd, GB
EN 13286-4:2021 A Compressive strength of hydraulically bound mixtures BS EN 13286-41:2021 A Manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction BS EN 13286-51:2004 A Cu
Glasgow, GB
EN 13286-4:2021 A SITE TESTS CONCRETE - fresh Sampling fresh concrete on site - composite sample - spot sample BS EN 12350-1:2019 X Slump BS EN 12350-2:2019 X Air content - pressure gauge method BS EN 12350-7
Glasgow, GB
EN 13286-48:2005 A, D*, F* Manufacture of cubic test specimens - vibrating hammer compaction BS EN 13286-51:2004 D*, F* CONCRETE - fresh Sampling fresh concrete BS EN 12350-1:2019 X, Flexi -spot -composite Slu
Ashover, GB
EN 13286-4:2010 A Determination of unconfined compressive stress BS EN 13286-41:2021 A Moisture condition value (MCV) BS EN 13286-46:2003 A, B, X California bearing ratio, immediate bearing index and linear swellin
East Goscote, GB
EN 13286-4:2021 Leicester California bearing ratio, immediate bearing index and linear swelling BS EN 13286-47:2021 Leicester Manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compactio
Durham, GB
EN 13286-4:2021 A END
Milton Keynes, GB
EN 13286-4:2021 Laboratory END
Liverpool, GB
EN 13286-46:2003 Laboratory BS EN 13286-46:2003 Laboratory California bearing ratio, immediate bearing index and linear swelling BS EN 13286-47:2021 Laboratory END
This page is a fixed slice of the register: every EN 13286 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.