6 laboratories in United Kingdom are accredited by UKAS under ISO/IEC 17025 to perform EN ISO 6507-1:2023 testing. These labs commonly handle Metal matrices. From the accredited scope text: “EN ISO 6507-1:2023 Tensile testing (forces up to 50 kN) BS EN ISO 6892-1:2019 Method A2 Neutral salt spray corrosion of coated metals BS EN ISO 9227:2022+A1:2024 Resistance to cyclic corrosion BS EN I” “EN ISO 6507-1:2023 Charpy Impact (V notch) (-101ºC to ambient & -196ºC) including lateral expansion and percentage shear BS EN ISO 148-1:2016 ASTM A370-24a ASTM E23-25 Izod (ambient) BS 131-1:1961 (20” “EN ISO 6507-1:2023 Chemical Tests Elemental analysis Low Alloy and Stainless Steel Boron, Carbon, Chromium, Copper, Molybdenum, Manganese, Nitrogen, Nickel, Phosphorous, Silicon, Sulphur, Vanadium. Do” “EN ISO 6507-1:2023 Impact: Charpy V-notch ( -50C to Ambient) BS EN ISO 148-1:2016 Tensile: Ambient Temperature – (UTS Only) (Load 0.2kN up to 300 kN) BS EN ISO 6892-1:2019 Weldments Tests designated”
Glasgow, GB
EN ISO 6507-1:2023 Mechanical Fasteners (Nails, screws and Staples) Withdrawal Force BS EN 14566:2008 + A1:2009 (Clause 5.4) Pull Through Force BS EN 14566:2008 + A1:2009 (Clause 5.8) Drilling Time Test BS EN 14566:2008
Powys, GB
EN ISO 6507-1:2023 Impact: Charpy V-notch ( -50C to Ambient) BS EN ISO 148-1:2016 Tensile: Ambient Temperature – (UTS Only) (Load 0.2kN up to 300 kN) BS EN ISO 6892-1:2019 Weldments Tests designated in specific w
Tyne & Wear, GB
EN ISO 6507-1:2023 Charpy Impact (V notch) (-101ºC to ambient & -196ºC) including lateral expansion and percentage shear BS EN ISO 148-1:2016 ASTM A370-24a ASTM E23-25 Izod (ambient) BS 131-1:1961 (2007) Bend BS EN I
Worcester, GB
EN ISO 6507-1:2023 Chemical Tests Elemental analysis Low Alloy and Stainless Steel Boron, Carbon, Chromium, Copper, Molybdenum, Manganese, Nitrogen, Nickel, Phosphorous, Silicon, Sulphur, Vanadium. Documented in house
Derbyshire, GB
EN ISO 6507-1:2023 Low Force Vickers HV 0.3 HV 1 BS EN ISO 6507-1:2023 END
Staffordshire, GB
EN ISO 6507-1:2023 Tensile testing (forces up to 50 kN) BS EN ISO 6892-1:2019 Method A2 Neutral salt spray corrosion of coated metals BS EN ISO 9227:2022+A1:2024 Resistance to cyclic corrosion BS EN ISO 11997-1:2017 Cycle B
This page is a fixed slice of the register: every EN ISO 6507-1:2023 scope we hold for United Kingdom. Search narrows it further by city, accreditation body, or a term from the scope text itself.
Search labs in United KingdomUnited Kingdom Accreditation Service (UKAS) is the primary accreditation body issuing ISO/IEC 17025 accreditation for testing laboratories in United Kingdom.
ISO/IEC 17025 is the international standard for the competence of testing and calibration laboratories. Accreditation to this standard provides independent confirmation that a laboratory operates a quality management system and is technically competent to produce valid results within its declared scope.